supernets/unrealircd
supernets/unrealircd
4
Fork 0
mirror of git://git.acid.vegas/unrealircd.git synced 2024-11-14 03:56:46 +00:00
Code Issues Activity
c1971584d3
unrealircd/Config
acidvegas c1971584d3
Updated to 5.0.6
2020-07-16 18:06:52 -04:00

793 lines
21 KiB
Bash
Executable File
Raw Blame History

#!/bin/sh
#
# Config script for UnrealIRCd
# (C) 2001-2019 The UnrealIRCd Team
#
# This configure script is free software; the UnrealIRCd Team gives
# unlimited permission to copy, distribute and modify as long as the
# copyright headers stay intact
#
#
# Rewritten completely to be an interface to autoconf by codemastr
# This was inspired by the config by Michael Graff (explorer@flame.org)
# but was written from scratch
# In order to be faster than the old Config, this assumes that all information
# in the cache file is valid and therefore doesn't check it, so if you messed with
# default values thats your problem :P
# some bits edited by baafie on March 17 2004, every change marked.
RUN_CONFIGURE () {
ARG=" "
if [ -z "$BINDIR" -o -z "$DATADIR" -o -z "$CONFDIR" -o -z "$MODULESDIR" -o -z "$LOGDIR" -o -z "$CACHEDIR" -o -z "$DOCDIR" -o -z "$TMPDIR" -o -z "$PRIVATELIBDIR" ]; then
echo "Sorry './Config -quick' cannot be used because your 'config.settings'"
echo "file either does not exist or is from an old UnrealIRCd version"
echo "(older than UnrealIRCd 5.0.0)."
echo ""
echo "Please run './Config' without -quick and answer all questions."
echo ""
exit
fi
mkdir -p $TMPDIR
mkdir -p $PRIVATELIBDIR
# Do this even if we're not in advanced mode
if [ "$SHOWLISTMODES" = "1" ] ; then
ARG="$ARG--with-showlistmodes "
fi
if [ "$ADVANCED" = "1" ] ; then
if [ "$NOOPEROVERRIDE" = "1" ] ; then
ARG="$ARG--with-no-operoverride "
fi
if [ "$OPEROVERRIDEVERIFY" = "1" ] ; then
ARG="$ARG--with-operoverride-verify "
fi
fi
if test x"$SSLDIR" = "x" ; then
ARG="$ARG--enable-ssl "
else
ARG="$ARG--enable-ssl=$SSLDIR "
fi
if [ "$REMOTEINC" = "1" ] ; then
ARG="$ARG--enable-libcurl=$CURLDIR "
fi
if [ "$PREFIXAQ" != "1" ]; then
ARG="$ARG--disable-prefixaq "
fi
if [ "$MAXCONNECTIONS_REQUEST" != "auto" ]; then
ARG="$ARG--with-maxconnections=$MAXCONNECTIONS_REQUEST "
fi
ARG="$ARG--with-bindir=$BINDIR "
ARG="$ARG--with-datadir=$DATADIR "
ARG="$ARG--with-pidfile=$DATADIR/unrealircd.pid "
ARG="$ARG--with-confdir=$CONFDIR "
ARG="$ARG--with-modulesdir=$MODULESDIR "
ARG="$ARG--with-logdir=$LOGDIR "
ARG="$ARG--with-cachedir=$CACHEDIR "
ARG="$ARG--with-docdir=$DOCDIR "
ARG="$ARG--with-tmpdir=$TMPDIR "
ARG="$ARG--with-privatelibdir=$PRIVATELIBDIR "
ARG="$ARG--with-scriptdir=$BASEPATH "
ARG="$ARG--with-nick-history=$NICKNAMEHISTORYLENGTH "
ARG="$ARG--with-permissions=$DEFPERM "
ARG="$ARG--enable-dynamic-linking "
ARG="$ARG $EXTRAPARA "
CONF="./configure $ARG"
# remove possibly old instances of curl in ~/unrealircd/lib/
rm -f $PRIVATELIBDIR/*curl* 1>/dev/null 2>&1
# Ensure we install curl even if someone does ./Config -quick...
if [ "x$CURLDIR" = "x$UNREALCWD/extras/curl" ]; then
INSTALLCURL=1
fi
if [ "x$INSTALLCURL" = "x1" ]; then
extras/curlinstall "$PRIVATELIBDIR" || exit 1
fi
# At least do SOME parallel compiling by default, IF:
# - the MAKE environment variable is not set
# - the MAKEFLAGS environment variable is not set
# - we are using GNU Make
if [ "x$MAKE" = "x" ]; then
if [ "x$MAKEFLAGS" = "x" ]; then
if make --version 2>&1|grep -q "GNU Make"; then
echo "Running with 4 concurrent build processes by default (make -j4)."
export MAKE='make -j4'
fi
fi
fi
echo $CONF
$CONF || exit 1
cd "$UNREALCWD"
if [ "$QUICK" != "1" ] ; then
if [ ! -f $CONFDIR/tls/server.cert.pem -a ! -f $CONFDIR/ssl/server.cert.pem ]; then
export OPENSSLPATH
TEST=""
while [ -z "$TEST" ] ; do
if [ "$GENCERTIFICATE" = "1" ] ; then
TEST="Yes"
else
TEST="No"
fi
echo ""
echo "Do you want to generate an SSL certificate for the IRCd?"
echo "Only answer No if you already have one."
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$TEST
fi
case "$cc" in
[Yy]*)
GENCERTIFICATE="1"
;;
[Nn]*)
GENCERTIFICATE=""
;;
*)
echo ""
echo "You must enter either Yes or No"
TEST=""
;;
esac
done
if [ "$GENCERTIFICATE" = 1 ]; then
make pem
echo "Certificate created successfully."
sleep 1
else
echo "Ok, not generating SSL certificate. Make sure that the certificate and key"
echo "are installed in conf/tls/server.crt.pem and conf/tls/server.key.pem prior to starting the IRCd."
fi
else
echo "SSL certificate already exists in configuration directory, no need to regenerate."
fi
fi
# Silently force a 'make clean' as otherwise part (or whole) of the
# compiled source could be using different settings than the user
# just requested when re-running ./Config.
make clean 1>/dev/null 2>&1
}
RUN_ADVANCED () {
TEST=""
while [ -z "$TEST" ] ; do
if [ "$SHOWLISTMODES" = "1" ] ; then
TEST="Yes"
else
TEST="No"
fi
echo ""
echo "Do you want to show the modes a channel has set in the /list output?"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$TEST
fi
case "$cc" in
[Yy]*)
SHOWLISTMODES="1"
;;
[Nn]*)
SHOWLISTMODES=""
;;
*)
echo ""
echo "You must enter either Yes or No"
TEST=""
;;
esac
done
TEST=""
while [ -z "$TEST" ] ; do
if [ "$NOOPEROVERRIDE" = "1" ] ; then
TEST="Yes"
else
TEST="No"
fi
echo ""
echo "Do you want to disable oper override?"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$TEST
fi
case "$cc" in
[Yy]*)
NOOPEROVERRIDE="1"
;;
[Nn]*)
NOOPEROVERRIDE=""
;;
*)
echo ""
echo "You must enter either Yes or No"
TEST=""
;;
esac
done
TEST=""
while [ -z "$TEST" ] ; do
if [ "$OPEROVERRIDEVERIFY" = "1" ] ; then
TEST="Yes"
else
TEST="No"
fi
echo ""
echo "Do you want to require opers to /invite themselves into a +s or +p channel?"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$TEST
fi
case "$cc" in
[Yy]*)
OPEROVERRIDEVERIFY="1"
;;
[Nn]*)
OPEROVERRIDEVERIFY=""
;;
*)
echo ""
echo "You must enter either Yes or No"
TEST=""
;;
esac
done
}
c=""
n=""
UNREALCWD="`pwd`"
BASEPATH="$HOME/unrealircd"
DEFPERM="0600"
SSLDIR=""
NICKNAMEHISTORYLENGTH="100"
MAXCONNECTIONS_REQUEST="auto"
REMOTEINC="1"
CURLDIR=""
PREFIXAQ="0"
SHOWLISTMODES="0"
NOOPEROVERRIDE=""
OPEROVERRIDEVERIFY=""
GENCERTIFICATE="1"
EXTRAPARA=""
if [ "`eval echo -n 'a'`" = "-n a" ] ; then
c="\c"
else
n="-n"
fi
#parse arguments
IMPORTEDSETTINGS=""
NOINTRO=""
QUICK=""
ADVANCED=""
while [ $# -ge 1 ] ; do
if [ $1 = "--help" ] ; then
echo "Config utility for UnrealIRCd"
echo "-----------------------------"
echo "Syntax: ./Config [options]"
echo "-nointro Skip intro (release notes, etc)"
echo "-quick Skip questions, go straight to configure"
echo "-advanced Include additional advanced questions"
exit 0
elif [ $1 = "-nointro" ] ; then
NOINTRO="1"
elif [ $1 = "-quick" -o $1 = "-q" ] ; then
QUICK="1"
echo "running quick config"
if [ -f "config.settings" ] ; then
. ./config.settings
fi
RUN_CONFIGURE
cd "$UNREALCWD"
exit 0
elif [ $1 = "-advanced" ] ; then
PREADVANCED="1"
fi
shift 1
done
if [ "$PREADVANCED" = "1" ] ; then
ADVANCED="1"
elif [ "$ADVANCED" = "1" ]; then
ADVANCED=""
fi
if [ "`id -u`" = "0" ]; then
echo "ERROR: You cannot build or run UnrealIRCd as root"
echo ""
echo "Please create a separate account for building and running UnrealIRCd."
echo "See https://www.unrealircd.org/docs/Do_not_run_as_root"
exit
fi
clear
if [ -f "doc/Config.header" -a -z "$NOINTRO" ] ; then
more doc/Config.header
echo ""
echo $n "[Press Enter to continue]"
read cc
clear
fi
echo "We will now ask you a number of questions. You can just press ENTER to accept the defaults!"
echo ""
# This needs to be updated each release so auto-upgrading works for settings, modules, etc!!:
UNREALRELEASES="unrealircd-5.0.5.1 unrealircd-5.0.5 unrealircd-5.0.4 unrealircd-5.0.3.1 unrealircd-5.0.3 unrealircd-5.0.2 unrealircd-5.0.1 unrealircd-5.0.0 unrealircd-5.0.0-rc2 unrealircd-5.0.0-rc1"
if [ -f "config.settings" ]; then
. ./config.settings
else
# Try to load a previous config.settings
for x in $UNREALRELEASES
do
if [ -f ../$x/config.settings ]; then
IMPORTEDSETTINGS="../$x"
break
fi
done
echo "If you have previously installed UnrealIRCd on this shell then you can specify a"
echo "directory here so I can import the build settings and third party modules"
echo "to make your life a little easier."
if [ ! -z "$IMPORTEDSETTINGS" ]; then
echo "Found previous installation in: $IMPORTEDSETTINGS."
echo "You can enter a different path or type 'none' if you don't want to use it."
echo "Just press Enter to accept the default settings."
else
echo "If you install UnrealIRCd for the first time on this shell, then just hit Enter";
fi
TEST="$IMPORTEDSETTINGS"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ]; then
IMPORTEDSETTINGS="$TEST"
else
IMPORTEDSETTINGS="$cc"
fi
if [ "$IMPORTEDSETTINGS" = "none" ]; then
IMPORTEDSETTINGS=""
fi
if [ "$IMPORTEDSETTINGS" != "" ]; then
if [ -d $IMPORTEDSETTINGS/conf ]; then
echo "ERROR: Directory $IMPORTEDSETTINGS is an INSTALLATION directory (eg /home/irc/unrealircd)."
echo "This question was about a SOURCE directory (eg /home/irc/unrealircd-5.0.0)."
exit
fi
if [ ! -f $IMPORTEDSETTINGS/config.settings ]; then
echo "Directory $IMPORTEDSETTINGS does not exist or does not contain a config.settings file"
exit
fi
COPYMODULES="1"
if grep -q TOPICNICKISNUH $IMPORTEDSETTINGS/config.settings; then
echo "Directory $IMPORTEDSETTINGS seems to be UnrealIRCd 4.x (or older)."
echo "I will copy the settings but not any 3rd party modules, as they are incompatible with 5.x."
COPYMODULES="0"
fi
# Actually load the settings
. $IMPORTEDSETTINGS/config.settings
if [ "$COPYMODULES" = "1" ]; then
# Copy over 3rd party modules (also deals with 0 file cases, hence the silly looking code)
for f in $IMPORTEDSETTINGS/src/modules/third/*.c
do
[ -e "$f" ] && cp $f src/modules/third/
done
fi
fi
fi
# If we just imported settings and the curl dir is set to
# something like /home/xxx/unrealircd-5.x.y/extras/curl/
# (what we call 'local-curl') then remove this setting as
# it would refer to the old UnrealIRCd installation.
if [ ! -z "$IMPORTEDSETTINGS" ]; then
if echo "$CURLDIR"|grep -qi unrealircd; then
CURLDIR=""
fi
fi
TEST="$BASEPATH"
echo ""
echo "In what directory do you want to install UnrealIRCd?"
echo "(Note: UnrealIRCd 5 will need to be installed somewhere."
echo " If this directory does not exist it will be created.)"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
BASEPATH=$TEST
else
BASEPATH=`eval echo $cc` # modified
fi
if [ "$BASEPATH" = "$UNREALCWD" ]; then
echo ""
echo "ERROR: The installation directory cannot be the same as the directory"
echo " containing the source code ($UNREALCWD)."
echo " HINT: Usually the directory containing the source is $HOME/unrealircd-5.x.y"
echo " and the installation directory you would need to enter is $HOME/unrealircd"
exit 1
fi
# TODO: For -advanced we could prompt the user.
BINDIR="$BASEPATH/bin"
DATADIR="$BASEPATH/data"
CONFDIR="$BASEPATH/conf"
MODULESDIR="$BASEPATH/modules"
LOGDIR="$BASEPATH/logs"
CACHEDIR="$BASEPATH/cache"
DOCDIR="$BASEPATH/doc"
TMPDIR="$BASEPATH/tmp"
PRIVATELIBDIR="$BASEPATH/lib"
TEST=""
while [ -z "$TEST" ] ; do
TEST="$DEFPERM"
echo ""
echo "What should the default permissions for your configuration files be? (Set this to 0 to disable)"
echo "It is strongly recommended that you use 0600 to prevent unwanted reading of the file"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
DEFPERM=$TEST
break
fi
case "$cc" in
[0-9]*)
DEFPERM="$cc"
;;
*)
echo ""
echo "You must enter a number"
TEST=""
;;
esac
done
echo ""
echo "If you want, you can manually enter the path to OpenSSL/LibreSSL here."
echo "In most cases you can leave this blank and it will be detected automatically."
if [ -z "$SSLDIR" ]; then
uname|grep -q Darwin
if [ "$?" = 0 ]; then
echo "Looks like you're on a Mac - El Capitan and higher require"
echo "a 3rd party OpenSSL installation. We recommend using homebrew"
echo "to install OpenSSL, but you may install it any other way as well."
echo "We are selecting the default homebrew OpenSSL path - but you can"
echo "change it to another path if you have installed OpenSSL another way"
SSLDIR="/usr/local/opt/openssl/"
fi
fi
TEST="$SSLDIR"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
SSLDIR="$TEST"
else
SSLDIR=`eval echo $cc` # modified
fi
TEST=""
while [ -z "$TEST" ] ; do
if [ "$REMOTEINC" = "1" ] ; then
TEST="Yes"
else
TEST="No"
fi
echo ""
echo "Do you want to enable remote includes?"
echo "This allows stuff like this in your configuration file:"
echo "include \"https://www.somesite.org/files/opers.conf\";"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$TEST
fi
case "$cc" in
[Yy]*)
REMOTEINC="1"
;;
[Nn]*)
REMOTEINC=""
CURLDIR=""
;;
*)
echo ""
echo "You must enter either Yes or No"
TEST=""
;;
esac
done
if [ "$REMOTEINC" = "1" ] ; then
if [ ! -d "$CURLDIR" ]; then
# Reset any previous CURLDIR if it doesn't exist (anymore)
CURLDIR=""
fi
INSTALLCURL="0"
SUGGESTCURLDIR=""
if [ -d "/usr/local/include/curl" ]; then
SUGGESTCURLDIR="/usr/local"
fi
if [ -d "/usr/include/curl" ]; then
SUGGESTCURLDIR="/usr"
fi
# This one also works for /usr/include/x86_64-linux-gnu and friends:
if [ -f "/usr/bin/curl-config" ]; then
SUGGESTCURLDIR="/usr"
fi
GOTASYNC=0
if [ "x$SUGGESTCURLDIR" != "x" ]; then
# Check if it's of any use: a curl without async dns (cares) hangs the entire ircd..
# normally this is done in ./configure but now we're forced to do it also here..
if "$SUGGESTCURLDIR"/bin/curl-config --features | grep -q -e AsynchDNS; then
GOTASYNC="1"
fi
if [ "$GOTASYNC" != "1" ]; then
SUGGESTCURLDIRBAD="$CURLDIR"
SUGGESTCURLDIR=""
fi
fi
if [ "x$CURLDIR" = "x$HOME/curl" ]; then
if [ "x$SUGGESTCURLDIR" != "x" ]; then
# I guess some people will complain about this, but if system wide cURL is available
# and many people have old defaults then this is much preferred:
echo ""
echo "WARNING: Your previous (potentially old) setting is to use cURL from $HOME/curl."
echo "However, your operating system also provides a working cURL."
echo "I am therefore changing the setting to: $SUGGESTCURLDIR"
CURLDIR="$SUGGESTCURLDIR"
else
echo ""
echo "WARNING: We no longer use $HOME/curl nowadays."
echo "Use the automatic download and install feature below."
CURLDIR=""
fi
fi
if [ "x$CURLDIR" = "x" ]; then
CURLDIR="$SUGGESTCURLDIR"
# NOTE: CURLDIR may still be empty after this
# System curl has no asyncdns, so install our own.
if [ "$GOTASYNC" != "1" ]; then
CURLDIR=""
fi
# Need to output it here, as the HOME check from above may cause this to be no longer relevant.
if [ "x$CURLDIR" = "x" -a "x$SUGGESTCURLDIRBAD" != "x" ]; then
echo "Curl library was found in $SUGGESTCURLDIRBAD, but it does not support Asynchronous DNS (not compiled with c-ares)"
echo "so it's of no use to us as it would stall the IRCd on REHASH."
fi
fi
# Final check
if [ "x$CURLDIR" != "x" ]; then
"$CURLDIR/bin/curl-config" --features 2>/dev/null | grep -q -e AsynchDNS
if [ "$?" != 0 ]; then
echo "Curl from $CURLDIR seems unusable ($CURLDIR/bin/curl-config does not exist)"
CURLDIR=""
fi
fi
if [ "x$CURLDIR" = "x" ]; then
# Still empty?
TEST=""
while [ -z "$TEST" ] ; do
TEST="Yes"
echo ""
echo "Do you want me to automatically download and install curl for you?"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$TEST
fi
case "$cc" in
[Yy]*)
INSTALLCURL="1"
CURLDIR="$UNREALCWD/extras/curl"
;;
[Nn]*)
INSTALLCURL="0"
;;
*)
echo ""
echo "You must enter either Yes or No"
TEST=""
;;
esac
done
fi
if [ "$INSTALLCURL" != "1" ]; then
TEST=""
while [ -z "$TEST" ] ; do
TEST="$CURLDIR"
echo ""
echo "Specify the directory you installed libcurl to"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$TEST
else
TEST=$cc
CURLDIR=`eval echo $cc` # modified
fi
done
fi
fi
TEST=""
while [ -z "$TEST" ] ; do
if [ "$PREFIXAQ" = "1" ] ; then
TEST="Yes"
else
TEST="No"
fi
echo ""
echo "Do you want to enable prefixes for chanadmin and chanowner?"
echo "This will give +a the & prefix and ~ for +q (just like +o is @)"
echo "Supported by the major clients (mIRC, xchat, epic, eggdrop, Klient,"
echo "PJIRC, irssi, CGI:IRC, etc.)"
echo "This feature should be enabled/disabled network-wide."
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$TEST
fi
case "$cc" in
[Yy]*)
PREFIXAQ="1"
;;
[Nn]*)
PREFIXAQ=""
;;
*)
echo ""
echo "You must enter either Yes or No"
TEST=""
;;
esac
done
TEST=""
while [ -z "$TEST" ] ; do
TEST="$NICKNAMEHISTORYLENGTH"
echo ""
echo "How far back do you want to keep the nickname history?"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
NICKNAMEHISTORYLENGTH=$TEST
break
fi
case "$cc" in
[1-9]*)
NICKNAMEHISTORYLENGTH="$cc"
;;
*)
echo ""
echo "You must enter a number"
TEST=""
;;
esac
done
echo ""
TEST=""
while [ -z "$TEST" ] ; do
TEST="$MAXCONNECTIONS_REQUEST"
echo ""
echo "What is the maximum number of sockets (and file descriptors) that"
echo "UnrealIRCd may use?"
echo "It is recommended to leave this at the default setting 'auto',"
echo "which at present results in a limit of up to 8192, depending on"
echo "the system. When you boot UnrealIRCd later you will always see"
echo "the effective limit."
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
MAXCONNECTIONS_REQUEST=$TEST
break
fi
case "$cc" in
auto)
MAXCONNECTIONS_REQUEST="$cc"
;;
[1-9][0-9][0-9]*)
MAXCONNECTIONS_REQUEST="$cc"
;;
*)
echo ""
echo "You must to enter a number greater than or equal to 100."
echo "Or enter 'auto' to leave it at automatic, which is recommended."
TEST=""
;;
esac
done
if [ -n "$ADVANCED" ] ; then
RUN_ADVANCED
fi
TEST="$EXTRAPARA"
echo ""
echo "Would you like to pass any custom parameters to configure?"
echo "Most people don't need this and can just press ENTER."
echo "Otherwise, see \`./configure --help' and write them here:"
echo $n "[$TEST] -> $c"
read EXTRAPARA
if [ -z "$EXTRAPARA" ]; then
EXTRAPARA="$TEST"
fi
rm -f config.settings
cat > config.settings << __EOF__
#
BASEPATH="$BASEPATH"
BINDIR="$BINDIR"
DATADIR="$DATADIR"
CONFDIR="$CONFDIR"
MODULESDIR="$MODULESDIR"
LOGDIR="$LOGDIR"
CACHEDIR="$CACHEDIR"
DOCDIR="$DOCDIR"
TMPDIR="$TMPDIR"
PRIVATELIBDIR="$PRIVATELIBDIR"
PREFIXAQ="$PREFIXAQ"
MAXCONNECTIONS_REQUEST="$MAXCONNECTIONS_REQUEST"
NICKNAMEHISTORYLENGTH="$NICKNAMEHISTORYLENGTH"
DEFPERM="$DEFPERM"
SSLDIR="$SSLDIR"
REMOTEINC="$REMOTEINC"
CURLDIR="$CURLDIR"
SHOWLISTMODES="$SHOWLISTMODES"
NOOPEROVERRIDE="$NOOPEROVERRIDE"
OPEROVERRIDEVERIFY="$OPEROVERRIDEVERIFY"
GENCERTIFICATE="$GENCERTIFICATE"
EXTRAPARA="$EXTRAPARA"
ADVANCED="$ADVANCED"
__EOF__
RUN_CONFIGURE
cd "$UNREALCWD"
cat << __EOF__
_______________________________________________________________________
| |
| UnrealIRCd Compile-Time Config |
|_______________________________________________________________________|
|_______________________________________________________________________|
| |
| Now all you have to do is type 'make' and let it compile. When that's |
| done, you will receive other instructions on what to do next. |
| |
|_______________________________________________________________________|
|_______________________________________________________________________|
| - The UnrealIRCd Team - |
| |
| * Bram Matthys (Syzop) syzop@unrealircd.org |
| * Gottem gottem@unrealircd.org |
| * i i@unrealircd.org |
|_______________________________________________________________________|
__EOF__
Reference in New Issue View Git Blame Copy Permalink