supernets/anope
supernets
/
anope
mirror of git://git.acid.vegas/anope.git
4
Fork 0
Code Issues Activity
anope/cmake/NSIS.template.in

826 lines
22 KiB
Plaintext
Raw Permalink Blame History

; CPack install script designed for a nmake build
;--------------------------------
; You must define these values
!define VERSION "@CPACK_PACKAGE_VERSION@"
!define INST_DIR "@CPACK_TEMPORARY_DIRECTORY@"
;--------------------------------
;Variables
Var MUI_TEMP
Var STARTMENU_FOLDER
Var SV_ALLUSERS
Var START_MENU
Var DO_NOT_ADD_TO_PATH
Var ADD_TO_PATH_ALL_USERS
Var ADD_TO_PATH_CURRENT_USER
Var INSTALL_DESKTOP
;--------------------------------
;Include Modern UI
!include "MUI2.nsh"
;Default installation folder
InstallDir "$PROGRAMFILES\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
;--------------------------------
;General
;Name and file
Name "@CPACK_PACKAGE_NAME@ @CPACK_PACKAGE_VERSION@"
OutFile "@CPACK_TOPLEVEL_DIRECTORY@/@CPACK_OUTPUT_FILE_NAME@"
;Set compression
SetCompressor @CPACK_NSIS_COMPRESSOR@
@CPACK_NSIS_DEFINES@
!include Sections.nsh
;--- Component support macros: ---
; The code for the add/remove functionality is from:
; http://nsis.sourceforge.net/Add/Remove_Functionality
; It has been modified slightly and extended to provide
; inter-component dependencies.
Var AR_SecFlags
Var AR_RegFlags
@CPACK_NSIS_SECTION_SELECTED_VARS@
; Loads the "selected" flag for the section named SecName into the
; variable VarName.
!macro LoadSectionSelectedIntoVar SecName VarName
SectionGetFlags ${${SecName}} $${VarName}
IntOp $${VarName} $${VarName} & ${SF_SELECTED} ;Turn off all other bits
!macroend
; Loads the value of a variable... can we get around this?
!macro LoadVar VarName
IntOp $R0 0 + $${VarName}
!macroend
; Sets the value of a variable
!macro StoreVar VarName IntValue
IntOp $${VarName} 0 + ${IntValue}
!macroend
!macro InitSection SecName
; This macro reads component installed flag from the registry and
;changes checked state of the section on the components page.
;Input: section index constant name specified in Section command.
ClearErrors
;Reading component status from registry
ReadRegDWORD $AR_RegFlags HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@\Components\${SecName}" "Installed"
IfErrors "default_${SecName}"
;Status will stay default if registry value not found
;(component was never installed)
IntOp $AR_RegFlags $AR_RegFlags & ${SF_SELECTED} ;Turn off all other bits
SectionGetFlags ${${SecName}} $AR_SecFlags ;Reading default section flags
IntOp $AR_SecFlags $AR_SecFlags & 0xFFFE ;Turn lowest (enabled) bit off
IntOp $AR_SecFlags $AR_RegFlags | $AR_SecFlags ;Change lowest bit
; Note whether this component was installed before
!insertmacro StoreVar ${SecName}_was_installed $AR_RegFlags
IntOp $R0 $AR_RegFlags & $AR_RegFlags
;Writing modified flags
SectionSetFlags ${${SecName}} $AR_SecFlags
"default_${SecName}:"
!insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
!macroend
!macro FinishSection SecName
; This macro reads section flag set by user and removes the section
;if it is not selected.
;Then it writes component installed flag to registry
;Input: section index constant name specified in Section command.
SectionGetFlags ${${SecName}} $AR_SecFlags ;Reading section flags
;Checking lowest bit:
IntOp $AR_SecFlags $AR_SecFlags & ${SF_SELECTED}
IntCmp $AR_SecFlags 1 "leave_${SecName}"
;Section is not selected:
;Calling Section uninstall macro and writing zero installed flag
!insertmacro "Remove_${${SecName}}"
WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@\Components\${SecName}" \
"Installed" 0
Goto "exit_${SecName}"
"leave_${SecName}:"
;Section is selected:
WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@\Components\${SecName}" \
"Installed" 1
"exit_${SecName}:"
!macroend
!macro RemoveSection_CPack SecName
; This macro is used to call section's Remove_... macro
;from the uninstaller.
;Input: section index constant name specified in Section command.
!insertmacro "Remove_${${SecName}}"
!macroend
; Determine whether the selection of SecName changed
!macro MaybeSelectionChanged SecName
!insertmacro LoadVar ${SecName}_selected
SectionGetFlags ${${SecName}} $R1
IntOp $R1 $R1 & ${SF_SELECTED} ;Turn off all other bits
; See if the status has changed:
IntCmp $R0 $R1 "${SecName}_unchanged"
!insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
IntCmp $R1 ${SF_SELECTED} "${SecName}_was_selected"
!insertmacro "Deselect_required_by_${SecName}"
goto "${SecName}_unchanged"
"${SecName}_was_selected:"
!insertmacro "Select_${SecName}_depends"
"${SecName}_unchanged:"
!macroend
;--- End of Add/Remove macros ---
;--------------------------------
;Interface Settings
!define MUI_ABORTWARNING
;----------------------------------------
; based upon a script of "Written by KiCHiK 2003-01-18 05:57:02"
;----------------------------------------
!verbose 3
!include "WinMessages.NSH"
!verbose 4
;====================================================
; get_NT_environment
; Returns: the selected environment
; Output : head of the stack
;====================================================
!macro select_NT_profile UN
Function ${UN}select_NT_profile
StrCmp $ADD_TO_PATH_ALL_USERS "1" 0 environment_single
DetailPrint "Selected environment for all users"
Push "all"
Return
environment_single:
DetailPrint "Selected environment for current user only."
Push "current"
Return
FunctionEnd
!macroend
!insertmacro select_NT_profile ""
!insertmacro select_NT_profile "un."
;----------------------------------------------------
!define NT_current_env 'HKCU "Environment"'
!define NT_all_env 'HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"'
!ifndef WriteEnvStr_RegKey
!ifdef ALL_USERS
!define WriteEnvStr_RegKey \
'HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"'
!else
!define WriteEnvStr_RegKey 'HKCU "Environment"'
!endif
!endif
; AddToPath - Adds the given dir to the search path.
; Input - head of the stack
; Note - Win9x systems requires reboot
Function AddToPath
Exch $0
Push $1
Push $2
Push $3
# don't add if the path doesn't exist
IfFileExists "$0\*.*" "" AddToPath_done
ReadEnvStr $1 PATH
Push "$1;"
Push "$0;"
Call StrStr
Pop $2
StrCmp $2 "" "" AddToPath_done
Push "$1;"
Push "$0\;"
Call StrStr
Pop $2
StrCmp $2 "" "" AddToPath_done
GetFullPathName /SHORT $3 $0
Push "$1;"
Push "$3;"
Call StrStr
Pop $2
StrCmp $2 "" "" AddToPath_done
Push "$1;"
Push "$3\;"
Call StrStr
Pop $2
StrCmp $2 "" "" AddToPath_done
Call IsNT
Pop $1
StrCmp $1 1 AddToPath_NT
; Not on NT
StrCpy $1 $WINDIR 2
FileOpen $1 "$1\autoexec.bat" a
FileSeek $1 -1 END
FileReadByte $1 $2
IntCmp $2 26 0 +2 +2 # DOS EOF
FileSeek $1 -1 END # write over EOF
FileWrite $1 "$\r$\nSET PATH=%PATH%;$3$\r$\n"
FileClose $1
SetRebootFlag true
Goto AddToPath_done
AddToPath_NT:
ReadRegStr $1 ${WriteEnvStr_RegKey} "PATH"
StrCmp $1 "" AddToPath_NTdoIt
Push $1
Call Trim
Pop $1
StrCpy $0 "$1;$0"
AddToPath_NTdoIt:
WriteRegExpandStr ${WriteEnvStr_RegKey} "PATH" $0
SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000
AddToPath_done:
Pop $3
Pop $2
Pop $1
Pop $0
FunctionEnd
; RemoveFromPath - Remove a given dir from the path
; Input: head of the stack
Function un.RemoveFromPath
Exch $0
Push $1
Push $2
Push $3
Push $4
Push $5
Push $6
IntFmt $6 "%c" 26 # DOS EOF
Call un.IsNT
Pop $1
StrCmp $1 1 unRemoveFromPath_NT
; Not on NT
StrCpy $1 $WINDIR 2
FileOpen $1 "$1\autoexec.bat" r
GetTempFileName $4
FileOpen $2 $4 w
GetFullPathName /SHORT $0 $0
StrCpy $0 "SET PATH=%PATH%;$0"
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoop:
FileRead $1 $3
StrCpy $5 $3 1 -1 # read last char
StrCmp $5 $6 0 +2 # if DOS EOF
StrCpy $3 $3 -1 # remove DOS EOF so we can compare
StrCmp $3 "$0$\r$\n" unRemoveFromPath_dosLoopRemoveLine
StrCmp $3 "$0$\n" unRemoveFromPath_dosLoopRemoveLine
StrCmp $3 "$0" unRemoveFromPath_dosLoopRemoveLine
StrCmp $3 "" unRemoveFromPath_dosLoopEnd
FileWrite $2 $3
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoopRemoveLine:
SetRebootFlag true
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoopEnd:
FileClose $2
FileClose $1
StrCpy $1 $WINDIR 2
Delete "$1\autoexec.bat"
CopyFiles /SILENT $4 "$1\autoexec.bat"
Delete $4
Goto unRemoveFromPath_done
unRemoveFromPath_NT:
ReadRegStr $1 ${WriteEnvStr_RegKey} "PATH"
StrCpy $5 $1 1 -1 # copy last char
StrCmp $5 ";" +2 # if last char != ;
StrCpy $1 "$1;" # append ;
Push $1
Push "$0;"
Call un.StrStr ; Find `$0;` in $1
Pop $2 ; pos of our dir
StrCmp $2 "" unRemoveFromPath_done
; else, it is in path
# $0 - path to add
# $1 - path var
StrLen $3 "$0;"
StrLen $4 $2
StrCpy $5 $1 -$4 # $5 is now the part before the path to remove
StrCpy $6 $2 "" $3 # $6 is now the part after the path to remove
StrCpy $3 $5$6
StrCpy $5 $3 1 -1 # copy last char
StrCmp $5 ";" 0 +2 # if last char == ;
StrCpy $3 $3 -1 # remove last char
WriteRegExpandStr ${WriteEnvStr_RegKey} "PATH" $3
SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000
unRemoveFromPath_done:
Pop $6
Pop $5
Pop $4
Pop $3
Pop $2
Pop $1
Pop $0
FunctionEnd
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Uninstall stuff
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
###########################################
# Utility Functions #
###########################################
;====================================================
; IsNT - Returns 1 if the current system is NT, 0
; otherwise.
; Output: head of the stack
;====================================================
; IsNT
; no input
; output, top of the stack = 1 if NT or 0 if not
;
; Usage:
; Call IsNT
; Pop $R0
; ($R0 at this point is 1 or 0)
!macro IsNT un
Function ${un}IsNT
Push $0
ReadRegStr $0 HKLM "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion
StrCmp $0 "" 0 IsNT_yes
; we are not NT.
Pop $0
Push 0
Return
IsNT_yes:
; NT!!!
Pop $0
Push 1
FunctionEnd
!macroend
!insertmacro IsNT ""
!insertmacro IsNT "un."
; StrStr
; input, top of stack = string to search for
; top of stack-1 = string to search in
; output, top of stack (replaces with the portion of the string remaining)
; modifies no other variables.
;
; Usage:
; Push "this is a long ass string"
; Push "ass"
; Call StrStr
; Pop $R0
; ($R0 at this point is "ass string")
!macro StrStr un
Function ${un}StrStr
Exch $R1 ; st=haystack,old$R1, $R1=needle
Exch ; st=old$R1,haystack
Exch $R2 ; st=old$R1,old$R2, $R2=haystack
Push $R3
Push $R4
Push $R5
StrLen $R3 $R1
StrCpy $R4 0
; $R1=needle
; $R2=haystack
; $R3=len(needle)
; $R4=cnt
; $R5=tmp
loop:
StrCpy $R5 $R2 $R3 $R4
StrCmp $R5 $R1 done
StrCmp $R5 "" done
IntOp $R4 $R4 + 1
Goto loop
done:
StrCpy $R1 $R2 "" $R4
Pop $R5
Pop $R4
Pop $R3
Pop $R2
Exch $R1
FunctionEnd
!macroend
!insertmacro StrStr ""
!insertmacro StrStr "un."
Function Trim ; Added by Pelaca
Exch $R1
Push $R2
Loop:
StrCpy $R2 "$R1" 1 -1
StrCmp "$R2" " " RTrim
StrCmp "$R2" "$\n" RTrim
StrCmp "$R2" "$\r" RTrim
StrCmp "$R2" ";" RTrim
GoTo Done
RTrim:
StrCpy $R1 "$R1" -1
Goto Loop
Done:
Pop $R2
Exch $R1
FunctionEnd
Function ConditionalAddToRegistry
Pop $0
Pop $1
StrCmp "$0" "" ConditionalAddToRegistry_EmptyString
WriteRegStr SHCTX "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@" \
"$1" "$0"
;MessageBox MB_OK "Set Registry: '$1' to '$0'"
DetailPrint "Set install registry entry: '$1' to '$0'"
ConditionalAddToRegistry_EmptyString:
FunctionEnd
;--------------------------------
!ifdef CPACK_USES_DOWNLOAD
Function DownloadFile
IfFileExists $INSTDIR\* +2
CreateDirectory $INSTDIR
Pop $0
; Skip if already downloaded
IfFileExists $INSTDIR\$0 0 +2
Return
StrCpy $1 "@CPACK_DOWNLOAD_SITE@"
try_again:
NSISdl::download "$1/$0" "$INSTDIR\$0"
Pop $1
StrCmp $1 "success" success
StrCmp $1 "Cancelled" cancel
MessageBox MB_OK "Download failed: $1"
cancel:
Return
success:
FunctionEnd
!endif
;--------------------------------
; Installation types
@CPACK_NSIS_INSTALLATION_TYPES@
;--------------------------------
; Component sections
@CPACK_NSIS_COMPONENT_SECTIONS@
;--------------------------------
; Define some macro setting for the gui
@CPACK_NSIS_INSTALLER_MUI_ICON_CODE@
@CPACK_NSIS_INSTALLER_ICON_CODE@
@CPACK_NSIS_INSTALLER_MUI_COMPONENTS_DESC@
;--------------------------------
;Pages
!define MUI_LANGDLL_REGISTRY_ROOT "SHCTX"
!define MUI_LANGDLL_REGISTRY_KEY "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@"
!define MUI_LANGDLL_REGISTRY_VALUENAME "NSIS:Language"
!insertmacro MUI_PAGE_WELCOME
!insertmacro MUI_PAGE_LICENSE "@CPACK_RESOURCE_FILE_LICENSE@"
!insertmacro MUI_PAGE_DIRECTORY
;Start Menu Folder Page Configuration
!define MUI_STARTMENUPAGE_REGISTRY_ROOT "SHCTX"
!define MUI_STARTMENUPAGE_REGISTRY_KEY "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
!define MUI_STARTMENUPAGE_REGISTRY_VALUENAME "Start Menu Folder"
!insertmacro MUI_PAGE_STARTMENU Application $STARTMENU_FOLDER
@CPACK_NSIS_PAGE_COMPONENTS@
!insertmacro MUI_PAGE_INSTFILES
!define MUI_FINISHPAGE_SHOWREADME "$INSTDIR\doc\README.txt"
!insertmacro MUI_PAGE_FINISH
!insertmacro MUI_UNPAGE_CONFIRM
!insertmacro MUI_UNPAGE_INSTFILES
;--------------------------------
;Languages
!insertmacro MUI_LANGUAGE "Dutch"
!insertmacro MUI_LANGUAGE "English"
!insertmacro MUI_LANGUAGE "French"
!insertmacro MUI_LANGUAGE "German"
!insertmacro MUI_LANGUAGE "Italian"
!insertmacro MUI_LANGUAGE "Portuguese"
!insertmacro MUI_LANGUAGE "Spanish"
;--------------------------------
;Installer Sections
Section "-Core installation"
;Use the entire tree produced by the INSTALL target. Keep the
;list of directories here in sync with the RMDir commands below.
SetOutPath "$INSTDIR"
@CPACK_NSIS_FULL_INSTALL@
;Store installation folder
WriteRegStr SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "" $INSTDIR
;Create uninstaller
WriteUninstaller "$INSTDIR\Uninstall.exe"
Push "DisplayName"
Push "@CPACK_NSIS_DISPLAY_NAME@"
Call ConditionalAddToRegistry
Push "DisplayVersion"
Push "@CPACK_PACKAGE_VERSION@"
Call ConditionalAddToRegistry
Push "Publisher"
Push "@CPACK_PACKAGE_VENDOR@"
Call ConditionalAddToRegistry
Push "UninstallString"
Push "$INSTDIR\Uninstall.exe"
Call ConditionalAddToRegistry
Push "NoRepair"
Push "1"
Call ConditionalAddToRegistry
!ifdef CPACK_NSIS_ADD_REMOVE
;Create add/remove functionality
Push "ModifyPath"
Push "$INSTDIR\AddRemove.exe"
Call ConditionalAddToRegistry
!else
Push "NoModify"
Push "1"
Call ConditionalAddToRegistry
!endif
; Optional registration
Push "DisplayIcon"
Push "$INSTDIR\@CPACK_NSIS_INSTALLED_ICON_NAME@"
Call ConditionalAddToRegistry
Push "HelpLink"
Push "@CPACK_NSIS_HELP_LINK@"
Call ConditionalAddToRegistry
Push "URLInfoAbout"
Push "@CPACK_NSIS_URL_INFO_ABOUT@"
Call ConditionalAddToRegistry
Push "Contact"
Push "@CPACK_NSIS_CONTACT@"
Call ConditionalAddToRegistry
!insertmacro MUI_STARTMENU_WRITE_BEGIN Application
;Create shortcuts
CreateDirectory "$SMPROGRAMS\$STARTMENU_FOLDER"
@CPACK_NSIS_CREATE_ICONS@
@CPACK_NSIS_CREATE_ICONS_EXTRA@
CreateShortCut "$SMPROGRAMS\$STARTMENU_FOLDER\Uninstall.lnk" "$INSTDIR\Uninstall.exe"
; Write special uninstall registry entries
Push "StartMenu"
Push "$STARTMENU_FOLDER"
Call ConditionalAddToRegistry
Push "DoNotAddToPath"
Push "$DO_NOT_ADD_TO_PATH"
Call ConditionalAddToRegistry
Push "AddToPathAllUsers"
Push "$ADD_TO_PATH_ALL_USERS"
Call ConditionalAddToRegistry
Push "AddToPathCurrentUser"
Push "$ADD_TO_PATH_CURRENT_USER"
Call ConditionalAddToRegistry
Push "InstallToDesktop"
Push "$INSTALL_DESKTOP"
Call ConditionalAddToRegistry
@CPACK_NSIS_EXTRA_INSTALL_COMMANDS@
!insertmacro MUI_STARTMENU_WRITE_END
SectionEnd
;--------------------------------
; determine admin versus local install
Function un.onInit
ClearErrors
UserInfo::GetName
IfErrors noLM
Pop $0
UserInfo::GetAccountType
Pop $1
StrCmp $1 "Admin" 0 +3
SetShellVarContext all
;MessageBox MB_OK 'User "$0" is in the Admin group'
Goto done
StrCmp $1 "Power" 0 +3
SetShellVarContext all
;MessageBox MB_OK 'User "$0" is in the Power Users group'
Goto done
noLM:
;Get installation folder from registry if available
done:
!insertmacro MUI_UNGETLANGUAGE
FunctionEnd
;--- Add/Remove callback functions: ---
!macro SectionList MacroName
;This macro used to perform operation on multiple sections.
;List all of your components in following manner here.
@CPACK_NSIS_COMPONENT_SECTION_LIST@
!macroend
Section -FinishComponents
;Removes unselected components and writes component status to registry
!insertmacro SectionList "FinishSection"
!ifdef CPACK_NSIS_ADD_REMOVE
; Get the name of the installer executable
System::Call 'kernel32::GetModuleFileNameA(i 0, t .R0, i 1024) i r1'
StrCpy $R3 $R0
; Strip off the last 13 characters, to see if we have AddRemove.exe
StrLen $R1 $R0
IntOp $R1 $R0 - 13
StrCpy $R2 $R0 13 $R1
StrCmp $R2 "AddRemove.exe" addremove_installed
; We're not running AddRemove.exe, so install it
CopyFiles $R3 $INSTDIR\AddRemove.exe
addremove_installed:
!endif
SectionEnd
;--- End of Add/Remove callback functions ---
;--------------------------------
; Component dependencies
Function .onSelChange
!insertmacro SectionList MaybeSelectionChanged
FunctionEnd
;--------------------------------
;Uninstaller Section
Section "Uninstall"
ReadRegStr $START_MENU SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@" "StartMenu"
;MessageBox MB_OK "Start menu is in: $START_MENU"
ReadRegStr $DO_NOT_ADD_TO_PATH SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@" "DoNotAddToPath"
ReadRegStr $ADD_TO_PATH_ALL_USERS SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@" "AddToPathAllUsers"
ReadRegStr $ADD_TO_PATH_CURRENT_USER SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@" "AddToPathCurrentUser"
;MessageBox MB_OK "Add to path: $DO_NOT_ADD_TO_PATH all users: $ADD_TO_PATH_ALL_USERS"
ReadRegStr $INSTALL_DESKTOP SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@" "InstallToDesktop"
;MessageBox MB_OK "Install to desktop: $INSTALL_DESKTOP "
@CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS@
;Remove files we installed.
;Keep the list of directories here in sync with the File commands above.
@CPACK_NSIS_DELETE_FILES@
@CPACK_NSIS_DELETE_DIRECTORIES@
!ifdef CPACK_NSIS_ADD_REMOVE
;Remove the add/remove program
Delete "$INSTDIR\AddRemove.exe"
!endif
;Remove the uninstaller itself.
Delete "$INSTDIR\Uninstall.exe"
DeleteRegKey SHCTX "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@"
;Remove the installation directory if it is empty.
RMDir "$INSTDIR"
; Remove the registry entries.
DeleteRegKey SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
; Removes all optional components
!insertmacro SectionList "RemoveSection_CPack"
!insertmacro MUI_STARTMENU_GETFOLDER Application $MUI_TEMP
Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
@CPACK_NSIS_DELETE_ICONS@
@CPACK_NSIS_DELETE_ICONS_EXTRA@
;Delete empty start menu parent directories
StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
startMenuDeleteLoop:
ClearErrors
RMDir $MUI_TEMP
GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
IfErrors startMenuDeleteLoopDone
StrCmp "$MUI_TEMP" "$SMPROGRAMS" startMenuDeleteLoopDone startMenuDeleteLoop
startMenuDeleteLoopDone:
; If the user changed the shortcut, then uninstall may not work. This should
; try to fix it.
StrCpy $MUI_TEMP "$START_MENU"
Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
@CPACK_NSIS_DELETE_ICONS_EXTRA@
;Delete empty start menu parent directories
StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
secondStartMenuDeleteLoop:
ClearErrors
RMDir $MUI_TEMP
GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
IfErrors secondStartMenuDeleteLoopDone
StrCmp "$MUI_TEMP" "$SMPROGRAMS" secondStartMenuDeleteLoopDone secondStartMenuDeleteLoop
secondStartMenuDeleteLoopDone:
DeleteRegKey /ifempty SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
Push $INSTDIR\bin
StrCmp $DO_NOT_ADD_TO_PATH_ "1" doNotRemoveFromPath 0
Call un.RemoveFromPath
doNotRemoveFromPath:
SectionEnd
;--------------------------------
; determine admin versus local install
; Is install for "AllUsers" or "JustMe"?
; Default to "JustMe" - set to "AllUsers" if admin or on Win9x
; This function is used for the very first "custom page" of the installer.
; This custom page does not show up visibly, but it executes prior to the
; first visible page and sets up $INSTDIR properly...
; Choose different default installation folder based on SV_ALLUSERS...
; "Program Files" for AllUsers, "My Documents" for JustMe...
Function .onInit
!insertmacro MUI_LANGDLL_DISPLAY
; Reads components status for registry
!insertmacro SectionList "InitSection"
StrCpy $SV_ALLUSERS "JustMe"
StrCpy $INSTDIR "$DOCUMENTS\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
ClearErrors
UserInfo::GetName
IfErrors noLM
Pop $0
UserInfo::GetAccountType
Pop $1
StrCmp $1 "Admin" 0 +3
SetShellVarContext all
;MessageBox MB_OK 'User "$0" is in the Admin group'
StrCpy $SV_ALLUSERS "AllUsers"
Goto done
StrCmp $1 "Power" 0 +3
SetShellVarContext all
;MessageBox MB_OK 'User "$0" is in the Power Users group'
StrCpy $SV_ALLUSERS "AllUsers"
Goto done
noLM:
StrCpy $SV_ALLUSERS "AllUsers"
;Get installation folder from registry if available
done:
StrCmp $SV_ALLUSERS "AllUsers" 0 +2
StrCpy $INSTDIR "$PROGRAMFILES\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
FunctionEnd
Reference in New Issue View Git Blame Copy Permalink