Just force-set the nickname and completely disregard what the client
sets during connection registration. Clients must discover their
effective nickname via RPL_WELCOME.
Most users will connect to their server with `<username>` as their
username in order to configure their upstreams.
Multi-upstream can be unintuitive to them and should not be enabled on
that first connection that is usually used for upstream configuration.
Multi-upstream is instead a power-user feature that should be explicitly
enabled with a specific network suffix.
We reserve the network suffix `*` and use it a special case to mean that
it requests multi-upstream mode.
Previously, when we sent READ for an upstream which was disconnected,
we would fail with an error. This is because we called unmarshalEntity,
which checked that the upstream was in the connected status.
But we don't need to be connected to update the READ timestamp, this is
a purely offline (wrt the upstream) operation.
This simply switches the call from unmarshalEntity to
unmarshalEntityNetwork to fix the issue.
When the client supports draft/chathistory, no need to request
delivery receipts via PING messages. Let's just not leave delivery
receipts alone. They'll go stale but should be never used (or used
by a non-chathistory client).
READ lets downstream clients share information between each other about
what messages have been read by other downstreams.
Each target/entity has an optional corresponding read receipt, which is
stored as a timestamp.
- When a downstream sends:
READ #chan timestamp=2020-01-01T01:23:45.000Z
the read receipt for that target is set to that date
- soju sends READ to downstreams:
- on JOIN, if the client uses the soju.im/read capability
- when the read receipt timestamp is set by any downstream
The read receipt date is clamped by the previous receipt date and the
current time.
A previous fix (d4b7bb02da) only fixed sending echo-message for
TAGMSG to self. We also need to send echo-message for TAGMSG to
other targets.
Closes: https://todo.sr.ht/~emersion/soju/111
Once the downstream connection has logged in with their bouncer
credentials, allow them to issue more SASL auths which will be
redirected to the upstream network. This allows downstream clients
to provide UIs to login to transparently login to upstream networks.
Implements the following recommendation from the spec:
> If the client completes registration (with CAP END, NICK, USER and any other
> necessary messages) while the SASL authentication is still in progress, the
> server SHOULD abort it and send a 906 numeric, then register the client
> without authentication.
The MOTD indicates the end of the registration's message burst, and
the server can send arbitrary messages before it.
Update the supported capabilities, the nick and the realname before
MOTD to make it so client logic that runs on MOTD can work with
up-to-date info.
This function wraps a parent context, and returns a new context
cancelled when the connection is closed. This will make it so
operations started from downstreamConn.handleMessage will be
cancelled when the connection is closed.
As a bonus, the timeout now applies to the whole TLS dial
operation. Before the timeout only applied to the net dial
operation, making it possible for a bad server to stall the request
by making the TLS handshake extremely slow.
When on an unbound bouncer network downstream, we should return no
targets (there are none, because there are no upstreams at all).
When on a multi-upstream downstream, we should return no targets as we
don't support multi-upstream CHATHISTORY TARGETS.
Before this patch, we returned a misleading error message:
:example.com 403 :Missing network suffix in name
If a downstream of prefix host `foo` sends a message, the other
downstream of prefix host `bar` should receive an echo PRIVMSG with
prefix host bar.
This fixes a regression where no prefix host was sent at all.
Add support for MONITOR in single-upstream mode.
Each downstream has its own set of monitored targets. These sets
are merged together to compute the MONITOR commands to send to
upstream.
Each upstream has a set of monitored targets accepted by the server
alongside with their status (online/offline). This is used to
directly send replies to downstreams adding a target another
downstream has already added, and send MONITOR S[TATUS] replies.
Co-authored-by: delthas <delthas@dille.cc>
This has the following upsides:
- We can now routes WHO replies to the correct client, without
broadcasting them to everybody.
- We are less likely to hit server rate limits when multiple downstreams
are issuing WHO commands at the same time.
The message stores don't need to access the internal network
struct, they just need network metadata such as ID and name.
This can ease moving message stores into a separate package in the
future.
Make Network.Nick optional, default to the user's username. This
will allow adding a global setting to set the nickname in the
future, just like we have for the real name.
References: https://todo.sr.ht/~emersion/soju/110
This adds support for WHOX, without bothering about flags and mask2
because Solanum and Ergo [1] don't support it either.
The motivation is to allow clients to reliably query account names.
It's not possible to use WHOX tokens to route replies to the right
client, because RPL_ENDOFWHO doesn't contain it.
[1]: https://github.com/ergochat/ergo/pull/1184
Closes: https://todo.sr.ht/~emersion/soju/135
That's what some widely used IRC servers do for their own services
(e.g. NickServ and ChanServ). This adds an additional level of
trust to make sure BouncerServ isn't typo'ed or impersonated.
This is a mecanical change, which just lifts up the context.TODO()
calls from inside the DB implementations to the callers.
Future work involves properly wiring up the contexts when it makes
sense.
See https://ircv3.net/specs/extensions/capability-negotiation
> Upon receiving either a CAP LS or CAP REQ command during connection
> registration, the server MUST not complete registration until the
> client sends a CAP END command to indicate that capability negotiation
> has ended.
This commit should prevent soju from trying to authenticate the user
prior to having received AUTHENTICATE messages, when the client eagerly
requests capabilities with CAP REQ seeing available capabilities
beforehand with CAP LS.
This allows users to set a default realname used if the per-network
realname isn't set.
A new "user update" command is introduced and can be extended to edit
other user properties and other users in the future.
Typically done via:
/notice $<bouncer> <message>
Or, for a connection not bound to a specific network:
/notice $* <message>
The message is broadcast as BouncerServ, because that's the only
user that can be trusted to belong to the bouncer by users. Any
other prefix would conflict with the upstream network.
The first MOTD upon connection is ignored, but subsequent MOTD messages
(requested by the "MOTD" message from the client, typically using a
/motd command) are forwarded.
In multi-upstream mode, we can't relay WHO/WHOIS messages for the
current user, because we can't decide which upstream server the
message should be relayed to.
In single-upstream server, we do know which upstream server to use,
so we can just blindly relay the message.
This allows users to send a self-WHO/WHOIS to check their cloak and
other information.
Instead of ignoring detached channels wehn replaying backlog,
process them as usual and relay messages as BouncerServ NOTICEs
if necessary. Advance the delivery receipts as if the channel was
attached.
Closes: https://todo.sr.ht/~emersion/soju/98
