Debugging entertheoid for the r730xd...
This commit is contained in:
parent
bcfcb83737
commit
7805bc5199
GPG Key ID:
EF4B922DB85DC9DE
100
enterthezoid
100
enterthezoid
@ -1,13 +1,17 @@
|
||||
#!/bin/bash
|
||||
# enter the zoid (zfs on root with raidz) - developed by acidvegas (https://git.acid.vegas/void)
|
||||
# enter the zoid (zfs on root with zraid) - developed by acidvegas (https://git.acid.vegas/void)
|
||||
# boot: https://github.com/leahneukirchen/hrmpf
|
||||
# reference: https://docs.zfsbootmenu.org/en/v2.3.x/guides/void-linux/uefi.html (do we need to make any updates?)
|
||||
|
||||
set -xev
|
||||
|
||||
# Configuration
|
||||
HOSTNAME=blackhole
|
||||
BOOT_DRIVE=/dev/sde # Use the internal USB drive for the boot partition
|
||||
POOL_DRIVES="/dev/sda /dev/sdb /dev/sdc /dev/sdd" # Drives used for the ZFS pool
|
||||
RAIDZ_PARITY="1" # Number of drives to use for the RAID-Z parity (must be 1 or greater otherwise why are you using ZFS?)
|
||||
export HOSTNAME=blackhole
|
||||
export BOOT_DRIVE=/dev/sde # Use the internal USB drive for the boot partition
|
||||
export BOOT_METHOD=direct # Use direct or refind
|
||||
export POOL_DRIVES="/dev/sda /dev/sdb /dev/sdc /dev/sdd" # Verify these with lsblk before running
|
||||
export RAIDZ_PARITY="1" # Number of drives to use for the RAID-Z parity (must be 1 or greater otherwise why are you using ZFS?)
|
||||
|
||||
|
||||
checks() {
|
||||
# Check if the system is using UEFI or BIOS
|
||||
@ -24,18 +28,15 @@ checks() {
|
||||
fi
|
||||
done
|
||||
|
||||
if [ $RAIDZ_PARITY -lt 1 ]; then
|
||||
echo "RAID-Z parity must be 1 or greater"
|
||||
# Check if the boot method is valid
|
||||
if [ $BOOT_METHOD != "direct" ] && [ $BOOT_METHOD != "refind" ]; then
|
||||
echo "Boot method must be direct or refind"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# Double check the drives are correct
|
||||
echo "Current block devices:" && lsblk
|
||||
echo "Selected boot drive: $BOOT_DRIVE"
|
||||
echo "Selected drives for the ZFS pool: $POOL_DRIVES"
|
||||
read -p "Are these drives correct? (y/n): " -r
|
||||
if [ $REPLY != "y" ]; then
|
||||
echo "Update the POOL_DRIVES configuration"
|
||||
# Check if the RAID-Z parity is valid
|
||||
if [ $RAIDZ_PARITY -lt 1 ]; then
|
||||
echo "RAID-Z parity must be 1 or greater"
|
||||
exit 1
|
||||
fi
|
||||
}
|
||||
@ -43,22 +44,17 @@ checks() {
|
||||
|
||||
setup_zfs() {
|
||||
# Validation
|
||||
checks
|
||||
|
||||
# Install dependencies
|
||||
xbps-install -y gptfdisk util-linux zfs
|
||||
check
|
||||
|
||||
# Generate the hostid
|
||||
source /etc/os-release
|
||||
export ID
|
||||
zgenhostid -f 0x00bab10c
|
||||
|
||||
echo "No turning back now...ZFS TIME!"
|
||||
|
||||
# Prepare the boot drive
|
||||
wipefs -a $BOOT_DRIVE
|
||||
sgdisk --zap-all $BOOT_DRIVE
|
||||
sgdisk -n "1:1m:+1g" -t "1:ef00" "$BOOT_DRIVE"
|
||||
sgdisk -n "1:1m:+1g" -t "1:ef00" $BOOT_DRIVE
|
||||
|
||||
# Prepare the ZFS pool drives
|
||||
for d in $POOL_DRIVES; do
|
||||
@ -70,11 +66,9 @@ setup_zfs() {
|
||||
fi
|
||||
done
|
||||
|
||||
echo "Entering a quasar cluster..."
|
||||
|
||||
# Create the ZFS pool
|
||||
# Create the ZFS pool (should we use noatime=on instead of relatime=on?)
|
||||
ZFS_POOL_DRIVES=$(echo $(for dev in $POOL_DRIVES; do find /dev/disk/by-id/ -samefile $(readlink -f "$dev") ! -name "*-part*" -print -quit; done))
|
||||
zpool create -f -o ashift=12 -O compression=lz4 -O acltype=posixacl -O xattr=sa -O noatime=on -o autotrim=on -o compatibility=openzfs-2.1-linux -m none zroot raidz${RAIDZ_PARITY} $ZFS_POOL_DRIVES
|
||||
zpool create -f -o ashift=12 -O compression=lz4 -O acltype=posixacl -O xattr=sa -O relatime=on -o autotrim=on -o compatibility=openzfs-2.1-linux -m none zroot raidz $ZFS_POOL_DRIVES
|
||||
|
||||
# Create the ZFS datasets
|
||||
zfs create -o mountpoint=none zroot/ROOT
|
||||
@ -91,8 +85,6 @@ setup_zfs() {
|
||||
# Trigger udev
|
||||
udevadm trigger
|
||||
|
||||
echo "Creating a black hole..."
|
||||
|
||||
# Install base system
|
||||
XBPS_ARCH=x86_64 xbps-install -S -R https://mirrors.servercentral.com/voidlinux/current -r /mnt base-system
|
||||
|
||||
@ -100,7 +92,7 @@ setup_zfs() {
|
||||
cp /etc/hostid /mnt/etc
|
||||
|
||||
# Chroot into the new system
|
||||
echo "Entering the void...make sure to run the following command to continue: ./enterthezoid chroot"
|
||||
echo "entering the void..."
|
||||
xchroot /mnt
|
||||
}
|
||||
|
||||
@ -137,12 +129,12 @@ setup_chroot() {
|
||||
# Set the dracut configuration
|
||||
printf "nofsck=\"yes\"\nadd_dracutmodules+=\" zfs \"\nomit_dracutmodules+=\" btrfs \"\n" > /etc/dracut.conf.d/zol.conf
|
||||
|
||||
|
||||
echo "Interstellar data de-spaghettification commencing..."
|
||||
|
||||
# Install the zfs package
|
||||
xbps-install -y zfs
|
||||
|
||||
# Set the zfsbootmenu command line options
|
||||
zfs set org.zfsbootmenu:commandline="quiet loglevel=4" zroot/ROOT
|
||||
|
||||
# Setup & mount the boot partition
|
||||
mkfs.vfat -F32 ${BOOT_DRIVE}1
|
||||
BOOT_UUID=$(blkid -s UUID -o value ${BOOT_DRIVE}1)
|
||||
@ -150,21 +142,45 @@ setup_chroot() {
|
||||
mkdir -p /boot/efi
|
||||
mount /boot/efi
|
||||
|
||||
echo "System is armed and dangerous"
|
||||
# Install and setup zfsbootmenu
|
||||
xbps-install -S zfsbootmenu gummiboot-efistub yq
|
||||
yq -iy '.Global.ManageImages=true | .Global.BootMountPoint="/boot/efi" | .Components.Enabled=false | .EFI.ImageDir="/boot/efi/EFI/zbm" | .EFI.Versions=false | .EFI.Enabled=true | .Kernel.CommandLine="quiet loglevel=0"' /etc/zfsbootmenu/config.yaml
|
||||
generate-zbm
|
||||
|
||||
# Install & configure gummiboot bootloader
|
||||
xbps-install -y gummiboot-efistub
|
||||
gummiboot install
|
||||
# Apply boot method
|
||||
# Note : Some systems can have issues with EFI boot entries, you might need to use a well-known EFI file name.
|
||||
# Reference : https://docs.zfsbootmenu.org/en/v2.3.x/general/portable.html
|
||||
if [ $BOOT_METHOD == "direct" ]; then
|
||||
xbps-install efibootmgr
|
||||
efibootmgr -c -d "$BOOT_DRIVE" -p "1" -L "ZFSBootMenu (Backup)" -l '\EFI\ZBM\VMLINUZ-BACKUP.EFI'
|
||||
efibootmgr -c -d "$BOOT_DRIVE" -p "1" -L "ZFSBootMenu" -l '\EFI\ZBM\VMLINUZ.EFI'
|
||||
elif [ $BOOT_METHOD == "refind" ]; then
|
||||
xbps-install -y refind
|
||||
refind-install
|
||||
rm /boot/refind_linux.conf
|
||||
printf "\"Boot default\" \"quiet loglevel=0 zbm.skip\"\n\"Boot to menu\" \"quiet loglevel=0 zbm.show\"\n" > /boot/efi/EFI/ZBM/refind_linux.conf
|
||||
# Everything below this line is a "hacky" solution to a problem I was having with the zfsbootmenu package
|
||||
# https://github.com/zbm-dev/zfsbootmenu/issues/293
|
||||
# The developers of zfsbootmenu are rude and unhelpful, so I had to figure this out on my own:
|
||||
# 12:39 -- Mode #zfsbootmenu [+b *!*@big.dick.acid.vegas] by zdykstra
|
||||
# 12:39 ◀▬▬ zdykstra has kicked acidvegas (acidvegas)
|
||||
# 12:39 -- #zfsbootmenu: Cannot join channel (+b) - you are banned
|
||||
mkdir -p /boot/efi/EFI/BOOT
|
||||
mvrefind /boot/efi/EFI/refind /boot/efi/EFI/BOOT
|
||||
temp=$(mktemp -d)
|
||||
wget -O $temp/latest.tar.gz https://get.zfsbootmenu.org/latest.tar.gz
|
||||
tar xvf $temp/latest.tar.gz -C $temp/
|
||||
rm $temp/latest.tar.gz
|
||||
mv $temp/zfs*/* /boot/efi/EFI/ZBM/
|
||||
rm /boot/efi/EFI/ZBM/vmlinuz.efi
|
||||
xbps-remove zfsbootmenu
|
||||
fi
|
||||
|
||||
# Create a bootloader entry
|
||||
mkdir -p /boot/efi/loader/entries
|
||||
printf "title Void Linux\nlinux /vmlinuz-linux\ninitrd /initramfs-linux.img\noptions root=ZFS=zroot/ROOT/void rw quiet loglevel=0" > /boot/efi/loader/entries/void-linux.conf
|
||||
|
||||
# Reconfigure the bootloader
|
||||
# Reconfigure the system
|
||||
xbps-reconfigure -fa
|
||||
|
||||
# Exit the chroot
|
||||
echo "Exiting the void...remember to run the following command to continue: ./enterthezoid final"
|
||||
# Exit the chroot environment
|
||||
echo "exiting the void..."
|
||||
exit
|
||||
}
|
||||
|
||||
|
||||
@ -1,148 +0,0 @@
|
||||
#!/bin/bash
|
||||
# enter the zoid (zfs on root with zraid) - developed by acidvegas (https://git.acid.vegas/void)
|
||||
# boot: https://github.com/leahneukirchen/hrmpf
|
||||
# reference: https://docs.zfsbootmenu.org/en/v2.2.x/guides/void-linux/uefi.html
|
||||
# https://docs.zfsbootmenu.org/en/v2.3.x/guides/void-linux/uefi.html (do we need to make any updates?)
|
||||
|
||||
set -xev
|
||||
|
||||
# Configuration
|
||||
HOSTNAME=blackhole
|
||||
BOOT_DRIVE=/dev/sde # Use the internal USB drive for the boot partition
|
||||
POOL_DRIVES="/dev/sda /dev/sdb /dev/sdc /dev/sdd" # Verify these with lsblk before running
|
||||
|
||||
|
||||
convert_pool_drives() {
|
||||
local devices=$1
|
||||
local by_id_drives=""
|
||||
|
||||
for dev in $devices; do
|
||||
local device_by_id_path=""
|
||||
for id in /dev/disk/by-id/*; do
|
||||
if [ "$(readlink -f "$id")" = "$(readlink -f "$dev")" ] && ! [[ $id =~ .*-part[0-9]+ ]]; then
|
||||
device_by_id_path="$id"
|
||||
break
|
||||
fi
|
||||
done
|
||||
by_id_drives+="${device_by_id_path} "
|
||||
done
|
||||
|
||||
echo $by_id_drives
|
||||
}
|
||||
|
||||
|
||||
setup_zfs() {
|
||||
source /etc/os-release
|
||||
export ID
|
||||
zgenhostid -f 0x00bab10c
|
||||
|
||||
wipefs -a $BOOT_DRIVE
|
||||
sgdisk --zap-all $BOOT_DRIVE
|
||||
sgdisk -n "1:1m:+1g" -t "1:ef00" "$BOOT_DRIVE"
|
||||
|
||||
for d in $POOL_DRIVES; do
|
||||
wipefs -a $d
|
||||
sgdisk --zap-all $d
|
||||
sgdisk -n "1:0:-10m" -t "1:bf00" "$d"
|
||||
if zdb -l "$d" &> /dev/null; then
|
||||
zpool labelclear -f "$d"
|
||||
fi
|
||||
done
|
||||
|
||||
POOL_DRIVES=$(convert_pool_drives "$POOL_DRIVES")
|
||||
zpool create -f -o ashift=12 -O compression=lz4 -O acltype=posixacl -O xattr=sa -O relatime=on -o autotrim=on -o compatibility=openzfs-2.1-linux -m none zroot raidz $POOL_DRIVES
|
||||
|
||||
zfs create -o mountpoint=none zroot/ROOT
|
||||
zfs create -o mountpoint=/ -o canmount=noauto zroot/ROOT/$ID
|
||||
zfs create -o mountpoint=/home zroot/home
|
||||
zpool set bootfs=zroot/ROOT/$ID zroot
|
||||
|
||||
zpool export zroot
|
||||
zpool import -N -R /mnt zroot
|
||||
zfs mount zroot/ROOT/$ID
|
||||
zfs mount zroot/home
|
||||
|
||||
udevadm trigger
|
||||
|
||||
XBPS_ARCH=x86_64 xbps-install -S -R https://mirrors.servercentral.com/voidlinux/current -r /mnt base-system
|
||||
cp /etc/hostid /mnt/etc
|
||||
|
||||
xchroot /mnt
|
||||
}
|
||||
|
||||
|
||||
setup_chroot() {
|
||||
passwd
|
||||
|
||||
xbps-install -Suy
|
||||
|
||||
xbps-install -y void-repo-nonfree
|
||||
xbps-install -Suy
|
||||
xbps-install -y intel-ucode
|
||||
ln -sf /etc/sv/intel-ucode /etc/runit/runsvdir/default/
|
||||
|
||||
ln -sf /usr/share/zoneinfo/America/New_York /etc/localtime
|
||||
ln -sf /etc/sv/dhcpcd /etc/runit/runsvdir/default/
|
||||
hwclock --systohc
|
||||
printf "$HOSTNAME\n" > /etc/hostname
|
||||
|
||||
printf "HOSTNAME=\"$HOSTNAME\"\nHARDWARECLOCK=\"UTC\"\nTIMEZONE=\"America/New_York\"\nKEYMAP=us\n" > /etc/rc.conf
|
||||
|
||||
printf "en_US.UTF-8 UTF-8\nen_US ISO-8859-1\n" > /etc/default/libc-locales
|
||||
xbps-reconfigure -f glibc-locales
|
||||
|
||||
printf "nofsck=\"yes\"\nadd_dracutmodules+=\" zfs \"\nomit_dracutmodules+=\" btrfs \"\n" > /etc/dracut.conf.d/zol.conf
|
||||
|
||||
xbps-install -y zfs
|
||||
zfs set org.zfsbootmenu:commandline="quiet loglevel=4" zroot/ROOT
|
||||
|
||||
mkfs.vfat -F32 ${BOOT_DRIVE}1
|
||||
BOOT_UUID=$(blkid -s UUID -o value ${BOOT_DRIVE}1)
|
||||
echo "UUID=$BOOT_UUID /boot/efi vfat defaults 0 0" > /etc/fstab
|
||||
mkdir -p /boot/efi
|
||||
mount /boot/efi
|
||||
|
||||
# Everything below this line is a "hacky" solution to a problem I was having with the zfsbootmenu package
|
||||
# https://github.com/zbm-dev/zfsbootmenu/issues/293
|
||||
# The developers of zfsbootmenu are rude and unhelpful, so I had to figure this out on my own:
|
||||
# 12:39 -- Mode #zfsbootmenu [+b *!*@big.dick.acid.vegas] by zdykstra
|
||||
# 12:39 ◀▬▬ zdykstra has kicked acidvegas (acidvegas)
|
||||
# 12:39 -- #zfsbootmenu: Cannot join channel (+b) - you are banned
|
||||
|
||||
xbps-install -S zfsbootmenu gummiboot-efistub yq
|
||||
yq -iy '.Global.ManageImages=true | .Global.BootMountPoint="/boot/efi" | .Components.Enabled=false | .EFI.ImageDir="/boot/efi/EFI/zbm" | .EFI.Versions=false | .EFI.Enabled=true | .Kernel.CommandLine="quiet loglevel=0"' /etc/zfsbootmenu/config.yaml
|
||||
generate-zbm
|
||||
|
||||
xbps-install -y refind
|
||||
refind-install
|
||||
rm /boot/refind_linux.conf
|
||||
printf "\"Boot default\" \"quiet loglevel=0 zbm.skip\"\n\"Boot to menu\" \"quiet loglevel=0 zbm.show\"\n" > /boot/efi/EFI/ZBM/refind_linux.conf
|
||||
|
||||
mkdir -p /boot/efi/EFI/BOOT
|
||||
mvrefind /boot/efi/EFI/refind /boot/efi/EFI/BOOT
|
||||
temp=$(mktemp -d)
|
||||
wget -O $temp/latest.tar.gz https://get.zfsbootmenu.org/latest.tar.gz
|
||||
tar xvf $temp/latest.tar.gz -C $temp/
|
||||
rm $temp/latest.tar.gz
|
||||
mv $temp/zfs*/* /boot/efi/EFI/ZBM/
|
||||
rm /boot/efi/EFI/ZBM/vmlinuz.efi
|
||||
|
||||
xbps-remove zfsbootmenu
|
||||
xbps-reconfigure -fa
|
||||
|
||||
exit
|
||||
}
|
||||
|
||||
|
||||
|
||||
if [ "$#" -ne 1 ]; then
|
||||
printf "usage: $0 [zfs|chroot|final]\n"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
case "$1" in
|
||||
zfs) setup_zfs ;;
|
||||
chroot) setup_chroot ;;
|
||||
final) umount -n -R /mnt; zpool export zroot; reboot ;;
|
||||
*) printf "usage: $0 [zfs|chroot|final]\n"; exit 1 ;;
|
||||
esac
|
||||
Loading…
Reference in New Issue
Block a user