void/scripts/vps

#!/bin/bash
# enter the void (vps) - developed by acidvegas (https://git.acid.vegas/void)

# Notes:
# 	MUSL builds for Void Linux are having an issue where `su` is segfaulting or returning "Bad address"
#
# Bootstrap:
# 	xbps-install -Su && xbps-install -u xbps && xbps-install wget nano && wget https://git.supernets.org/acidvegas/void/raw/branch/master/scripts/vps && chmod +x vps && ./vps root

set -xev

# Configuration
ARCH=x86_64 # x86_64 or x86_64-musl
DRIVE=/dev/vda
SSH_KEY="ssh-ed25519 REDACTED acidvegas@paloalto"
SWAP_SIZE=$((1 * 1024)) # 1GB
TIMEZONE="America/New_York"
USERNAME=supernets

# Let's dynamically set the hostname so we don't have to hardcode it
echo "Hostname:"
read HOSTNAME

setup_root() {
	xbps-install -y parted
	wipefs -a -f $DRIVE
	parted --script $DRIVE mklabel msdos
	parted --script $DRIVE mkpart primary ext4 1MiB 100%
	parted --script $DRIVE set 1 boot on
	mkfs.ext4 ${DRIVE}1
	mkdir -p /mnt
	mount ${DRIVE}1 /mnt
	mkdir -p /mnt/var/db/xbps/keys
	cp /var/db/xbps/keys/* /mnt/var/db/xbps/keys/
	REPO=https://repo-default.voidlinux.org/current
	[ $ARCH = 'x86_64-musl' ] && REPO=$REPO/musl
	XBPS_ARCH=$ARCH xbps-install -y -S -r /mnt -R "$REPO" base-system linux
	cp vps /mnt/root/
	xchroot /mnt /bin/bash
}

setup_chroot() {
	passwd

	xbps-install -u xbps
	xbps-remove -y base-system openssh
	xbps-install -Syu curl dropbear git htop incus incus-client incus-tools iptables nano net-tools runit-iptables tmux socklog-void wget

	# Set up networking
	IP_ADDR=$(ip addr show eth0 | grep 'inet ' | awk '{print $2}' | cut -d'/' -f1)
	GATEWAY=$(ip route show default | awk '/default/ {print $3}')
	printf "ip link set eth0 up\nip addr add ${IP_ADDR}/24 dev eth0\nip route add default via $GATEWAY\n" > /etc/rc.local
	printf "printf \"nameserver 208.67.222.222\\\nnameserver 208.67.220.220\\\nnameserver 2620:119:35::35\\\nnameserver 2620:119:53::53\" > /etc/resolv.conf" >> /etc/rc.local

	echo "$HOSTNAME" > /etc/hostname
	echo 'export PS1="\e[38;5;237m\T\e[0m \e[38;5;196m\u@\h\e[0m \e[38;5;226m\w\e[0m : "' > /root/.bashrc
	printf "set boldtext\nset minibar\nset nohelp\nset nowrap\nset quickblank\nset tabsize 4\nunbind ^J main\nset selectedcolor black,red\ninclude \"/usr/share/nano/*.nanorc\"\n" > /etc/nanorc
	printf "\nexport HISTFILE=/dev/null\nexport LESSHISTFILE=/dev/null\nexport PYTHONHISTFILE=/dev/null\n" >> /etc/profile
	printf "Defaults lecture = always\nDefaults lecture_file = /etc/sudoers.d/sudoers.lecture\nroot ALL=(ALL) ALL\n%%wheel ALL=(ALL) ALL\n" > /etc/sudoers
	printf "\n\033[1m     \033[32m\"Bee\" careful    \033[34m__\n       \033[32mwith sudo!    \033[34m// \ \n                     \\\\\\_/ \033[33m//\n   \033[35m''-.._.-''-.._.. \033[33m-(||)(')\n                     '''\033[0m\n" > /etc/sudoers.d/sudoers.lecture
	printf '#!/bin/sh\nexec 2>&1\n[ -r conf ] && . ./conf\nexec dropbear -K 0 -p %s -R -w -t -T 1 -F 2>&1\n' "$(shuf -i 10000-65534 -n 1)" > /etc/sv/dropbear/run
	echo "hsts=0" >> /etc/wgetrc
	>/var/log/lastlog && chattr +i /var/log/lastlog

	# Enable services (Using the runit dir because the system is not running yet)
	ln -s /etc/sv/socklog-unix/ /etc/runit/runsvdir/default/
	ln -s /etc/sv/nanoklogd/    /etc/runit/runsvdir/default/
	ln -s /etc/sv/dropbear/     /etc/runit/runsvdir/default/
	ln -s /etc/sv/incus         /etc/runit/runsvdir/default/
	ln -s /etc/sv/incus-user    /etc/runit/runsvdir/default/
	ln -s /usr/share/zoneinfo/$TIMEZONE /etc/localtime

	touch /swapfile
	dd if=/dev/zero of=/swapfile bs=1M count=${SWAP_SIZE} status=progress
	chmod 0600 /swapfile
	mkswap /swapfile && swapon /swapfile

	hwclock --systohc
	chsh -s /bin/bash

	useradd -m -s /bin/bash $USERNAME && passwd $USERNAME
	gpasswd -a $USERNAME _incus
	gpasswd -a $USERNAME _incus-admin
	printf "root:1000000:65536\n$USERNAME:165536:65536" > /etc/subgid
	printf "root:1000000:65536\n$USERNAME:165536:65536" > /etc/subuid
	cp vps /home/$USERNAME/ && chown $USERNAME:$USERNAME /home/$USERNAME/vps

	if [ ! $ARCH = 'x86_64-musl' ]; then
		xbps-reconfigure -f glibc-locales
	fi
	
	# Setup fstab
	echo "UUID=$(blkid -s UUID -o value ${DRIVE}1) / ext4 rw,errors=remount-ro,noatime 0 1" > /etc/fstab
	echo "tmpfs           /tmp        tmpfs   defaults,nosuid,nodev   0 0" >> /etc/fstab
	echo "/swapfile none swap sw 0 0" >> /etc/fstab
	echo "proc /proc proc defaults,hidepid=2 0 0" >> /etc/fstab
	mount -o remount /proc

	# Add the official SuperNETs seal of HARD FUCKIGN CORE INTERNET USAGE into the MOTD
	{
		echo -e ""
		echo -e "      \033[37;104m                                  \033[0m        \033[0m"
		echo -e "    \033[37;104m    \033[37;101m                              \033[37;104m    \033[0m      \033[0m"
		echo -e "  \033[37;104m    \033[37;101m      \033[37;103m  \033[37;101m    \033[37;103m        \033[37;101m    \033[37;103m  \033[37;101m        \033[37;104m    \033[0m    \033[0m"
		echo -e "\033[37;104m    \033[37;101m      \033[37;103m  \033[37;101m    \033[37;103m            \033[37;101m      \033[37;103m  \033[37;101m      \033[37;104m    \033[0m  \033[0m"
		echo -e "\033[37;104m    \033[37;101m    \033[37;103m    \033[37;101m    \033[37;103m                      \033[37;101m    \033[37;104m    \033[0m  \033[0m"
		echo -e "  \033[37;104m    \033[37;101m    \033[37;103m  \033[37;101m                      \033[37;103m    \033[37;101m  \033[37;104m    \033[0m    \033[0m"
		echo -e "    \033[37;104m    \033[37;101m                              \033[37;104m    \033[0m      \033[0m"
		echo -e "      \033[37;104m    \033[37;101m    \033[37;103m              \033[37;101m        \033[37;104m    \033[0m        \033[0m"
		echo -e "        \033[37;104m    \033[37;101m      \033[37;103m  \033[37;101m  \033[37;103m      \033[37;101m      \033[37;104m    \033[0m          \033[0m"
		echo -e "          \033[37;104m    \033[37;101m                  \033[37;104m    \033[0m            \033[0m"
		echo -e "            \033[37;104m    \033[37;101m    \033[37;103m      \033[37;101m    \033[37;104m    \033[0m              \033[0m"
		echo -e "              \033[37;104m    \033[37;101m    \033[37;103m  \033[37;101m    \033[37;104m    \033[0m                \033[0m"
		echo -e "                \033[37;104m    \033[37;101m      \033[37;104m    \033[0m                  \033[0m"
		echo -e "┏┓┳┳┏┓┏┓┳┓        \033[37;104m    \033[37;101m  \033[37;104m    \033[0m         ┳┓┏┓┏┳┓┏┓"
		echo -e "┗┓┃┃┣┛┣ ┣┫          \033[37;104m      \033[0m           ┃┃┣  ┃ ┗┓"
		echo -e "┗┛┗┛┻ ┗┛┛┗            \033[37;104m  \033[0m\033[0m             ┛┗┗┛ ┻ ┗┛"
		echo -e ""
	} > /etc/motd

	# Set up user SSH keys
	mkdir -p /home/$USERNAME/.ssh
	echo "$SSH_KEY" > /home/$USERNAME/.ssh/authorized_keys
	chmod 700 $HOME/.ssh && chown -R $USERNAME:$USERNAME /home/$USERNAME/.ssh
	chmod 400 $HOME/.ssh/authorized_keys && chattr +i $HOME/.ssh/authorized_keys && chattr +i $HOME/.ssh

	xbps-install -Sy grub
	grub-install $DRIVE
	grub-mkconfig -o /boot/grub/grub.cfg

	xbps-reconfigure -fa
}


setup_user() {
	echo 'export PS1="\e[38;5;237m\T\e[0m \e[38;5;196m\u@\h\e[0m \e[38;5;226m\w\e[0m : "' > ~/.bashrc
}


[ $1 = "root"   ] && setup_root
[ $1 = "chroot" ] && setup_chroot
[ $1 = "user"   ] && setup_user