48 lines
1.8 KiB
C
48 lines
1.8 KiB
C
#include "itoa.h"
|
|
#include <avr/dtostrf.h>
|
|
|
|
|
|
// Setup for BW16 and ST7735 80 x 160 TFT
|
|
#define USER_SETUP_ID 301
|
|
// See SetupX_Template.h for all options available
|
|
|
|
#define ST7735_DRIVER
|
|
|
|
|
|
#define TFT_WIDTH 80
|
|
#define TFT_HEIGHT 160
|
|
|
|
|
|
#define ST7735_GREENTAB160x80
|
|
|
|
// For ST7735, ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
|
|
// Try ONE option at a time to find the correct colour order for your display
|
|
|
|
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
|
|
// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
|
|
|
|
// Pin Mappings for BW16 board
|
|
#define TFT_MISO 11
|
|
#define TFT_MOSI 12
|
|
#define TFT_SCLK 10
|
|
#define TFT_CS 9 // Chip select control pin
|
|
#define TFT_DC 8 // Data Command control pin
|
|
#define TFT_RST 6 // Reset pin (could connect to RST pin)
|
|
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
#define SMOOTH_FONT
|
|
|
|
|
|
#define SPI_FREQUENCY 20000000
|
|
//#define SPI_FREQUENCY 27000000 // Actually sets it to 26.67MHz = 80/3
|
|
|