37 lines
1.4 KiB
C
37 lines
1.4 KiB
C
// See SetupX_Template.h for all options available
|
|
#define USER_SETUP_ID 14
|
|
|
|
#define TFT_PARALLEL_8_BIT
|
|
|
|
|
|
#define ILI9341_DRIVER
|
|
|
|
|
|
// ESP32 pins used for the parallel interface TFT
|
|
#define TFT_CS 33 // Chip select control pin
|
|
#define TFT_DC 15 // Data Command control pin - must use a pin in the range 0-31
|
|
#define TFT_RST 32 // Reset pin
|
|
|
|
#define TFT_WR 4 // Write strobe control pin - must use a pin in the range 0-31
|
|
#define TFT_RD 2
|
|
|
|
#define TFT_D0 12 // Must use pins in the range 0-31 for the data bus
|
|
#define TFT_D1 13 // so a single register write sets/clears all bits
|
|
#define TFT_D2 26
|
|
#define TFT_D3 25
|
|
#define TFT_D4 17
|
|
#define TFT_D5 16
|
|
#define TFT_D6 27
|
|
#define TFT_D7 14
|
|
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
#define SMOOTH_FONT
|