41 lines
1.5 KiB
C
41 lines
1.5 KiB
C
|
|
// This is the command sequence that initialises the ILI9163 driver
|
|
//
|
|
// This setup information is in a format accecpted by the commandList() function
|
|
// which reduces FLASH space, but on an ESP8266 there is plenty available!
|
|
//
|
|
// See ILI9341_Setup.h file for an alternative simpler format
|
|
|
|
{
|
|
// Initialization commands for ILI9163 screens
|
|
static const uint8_t ILI9163_cmds[] PROGMEM =
|
|
{
|
|
17, // 17 commands follow
|
|
0x01, 0 + TFT_INIT_DELAY, 120, // Software reset
|
|
0x11, 0 + TFT_INIT_DELAY, 5, // Exit sleep mode
|
|
0x3A, 1, 0x05, // Set pixel format
|
|
0x26, 1, 0x04, // Set Gamma curve 3
|
|
0xF2, 1, 0x01, // Gamma adjustment enabled
|
|
0xE0, 15, 0x3F, 0x25, 0x1C, 0x1E, 0x20, 0x12, 0x2A, 0x90,
|
|
0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, // Positive Gamma
|
|
0xE1, 15, 0x20, 0x20, 0x20, 0x20, 0x05, 0x00, 0x15,0xA7,
|
|
0x3D, 0x18, 0x25, 0x2A, 0x2B, 0x2B, 0x3A, // Negative Gamma
|
|
0xB1, 2, 0x08, 0x08, // Frame rate control 1
|
|
0xB4, 1, 0x07, // Display inversion
|
|
0xC0, 2, 0x0A, 0x02, // Power control 1
|
|
0xC1, 1, 0x02, // Power control 2
|
|
0xC5, 2, 0x50, 0x5B, // Vcom control 1
|
|
0xC7, 1, 0x40, // Vcom offset
|
|
0x2A, 4, 0x00, 0x00, 0x00, 0x7F, // Set column address
|
|
0x2B, 4 + TFT_INIT_DELAY, 0x00, 0x00, 0x00, 0x9F, 250, // Set page address
|
|
0x36, 1, 0xC8, // Set address mode
|
|
0x29, 0, // Set display on
|
|
};
|
|
|
|
commandList(ILI9163_cmds);
|
|
|
|
#ifdef CGRAM_OFFSET
|
|
colstart = 0;
|
|
rowstart = 0;
|
|
#endif
|
|
} |