27 lines
1.3 KiB
C
27 lines
1.3 KiB
C
|
#define USER_SETUP_ID 51
|
||
|
|
|
||
|
|
#define ILI9481_DRIVER
|
||
|
|
|
||
|
|
#define TFT_BL 12 // LED back-light control pin
|
||
|
|
#define TFT_BACKLIGHT_ON HIGH // Level to turn ON back-light (HIGH or LOW)
|
||
|
|
|
||
|
|
#define TFT_MISO 23
|
||
|
|
#define TFT_MOSI 19
|
||
|
|
#define TFT_SCLK 18
|
||
|
|
#define TFT_CS 5 // Chip select control pin
|
||
|
|
#define TFT_DC 27 // Data Command control pin
|
||
|
|
#define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
|
||
|
|
|
||
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
||
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
||
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
||
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
||
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
|
||
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
||
|
|
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
||
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
||
|
|
|
||
|
|
#define SMOOTH_FONT
|
||
|
|
|
||
|
|
#define SPI_FREQUENCY 26666666
|
||
|
|
#define SPI_READ_FREQUENCY 20000000
|