34 lines
1.5 KiB
C
34 lines
1.5 KiB
C
// LilyGo T-Display RP2040 (ST7789 135 x 240 display)
|
|
#define USER_SETUP_ID 137
|
|
|
|
#define ST7789_DRIVER // Configure all registers
|
|
|
|
#define TFT_WIDTH 135
|
|
#define TFT_HEIGHT 240
|
|
|
|
#define CGRAM_OFFSET // Library will add offsets required
|
|
|
|
// For LilyGo T-Display RP2040
|
|
#define TFT_CS 5 // Chip Select pin
|
|
#define TFT_DC 1 // Data Command control pin
|
|
#define TFT_RST 0 // Reset pin
|
|
#define TFT_MOSI 3
|
|
#define TFT_SCLK 2
|
|
// Don't uncomment next line if you want PWM control of the backlight in the sketch
|
|
//#define TFT_BL 4
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
#define SMOOTH_FONT
|
|
|
|
#define SPI_FREQUENCY 40000000
|
|
#define SPI_READ_FREQUENCY 20000000
|
|
#define SPI_TOUCH_FREQUENCY 2500000
|