126 lines
3.4 KiB
C++
126 lines
3.4 KiB
C++
/*
|
|
RadioLib FSK4 Transmit Example
|
|
|
|
This example sends an example FSK-4 'Horus Binary' message
|
|
using SX1278's FSK modem.
|
|
|
|
This signal can be demodulated using a SSB demodulator (SDR or otherwise),
|
|
and horusdemodlib: https://github.com/projecthorus/horusdemodlib/wiki
|
|
|
|
Other modules that can be used for FSK4:
|
|
- SX127x/RFM9x
|
|
- RF69
|
|
- SX1231
|
|
- CC1101
|
|
- SX126x
|
|
- nRF24
|
|
- Si443x/RFM2x
|
|
- SX128x
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
*/
|
|
|
|
// include the library
|
|
#include <RadioLib.h>
|
|
|
|
// SX1278 has the following connections:
|
|
// NSS pin: 10
|
|
// DIO0 pin: 2
|
|
// RESET pin: 9
|
|
// DIO1 pin: 3
|
|
SX1278 radio = new Module(10, 2, 9, 3);
|
|
|
|
// or using RadioShield
|
|
// https://github.com/jgromes/RadioShield
|
|
//SX1278 radio = RadioShield.ModuleA;
|
|
|
|
// create FSK4 client instance using the FSK module
|
|
FSK4Client fsk4(&radio);
|
|
|
|
// An encoded Horus Binary telemetry packet.
|
|
// Refer here for packet format information:
|
|
// https://github.com/projecthorus/horusdemodlib/wiki/2---Modem-Details#horus-binary-v1-mode-4-fsk
|
|
// After demodulation, deinterleaving, and descrambling, this results in a packet:
|
|
// 00000001172D0000000000000000D20463010AFF2780
|
|
// This decodes to the Habitat-compatible telemetry string:
|
|
// $$4FSKTEST,0,01:23:45,0.00000,0.00000,1234,99,1,10,5.00*ABCD
|
|
int horusPacketLen = 45;
|
|
byte horusPacket[] = {
|
|
0x45, 0x24, 0x24, 0x48, 0x2F, 0x12, 0x16, 0x08, 0x15, 0xC1,
|
|
0x49, 0xB2, 0x06, 0xFC, 0x92, 0xEB, 0x93, 0xD7, 0xEE, 0x5D,
|
|
0x35, 0xA0, 0x91, 0xDA, 0x8D, 0x5F, 0x85, 0x6B, 0x63, 0x03,
|
|
0x6B, 0x60, 0xEA, 0xFE, 0x55, 0x9D, 0xF1, 0xAB, 0xE5, 0x5E,
|
|
0xDB, 0x7C, 0xDB, 0x21, 0x5A, 0x19
|
|
};
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize SX1278 with default settings
|
|
Serial.print(F("[SX1278] Initializing ... "));
|
|
int state = radio.beginFSK();
|
|
|
|
// when using one of the non-LoRa modules for FSK4
|
|
// (RF69, CC1101, Si4432 etc.), use the basic begin() method
|
|
// int state = radio.begin();
|
|
|
|
if(state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while(true);
|
|
}
|
|
|
|
// initialize FSK4 client
|
|
// NOTE: FSK4 frequency shift will be rounded
|
|
// to the nearest multiple of frequency step size.
|
|
// The exact value depends on the module:
|
|
// SX127x/RFM9x - 61 Hz
|
|
// RF69 - 61 Hz
|
|
// CC1101 - 397 Hz
|
|
// SX126x - 1 Hz
|
|
// nRF24 - 1000000 Hz
|
|
// Si443x/RFM2x - 156 Hz
|
|
// SX128x - 198 Hz
|
|
Serial.print(F("[FSK4] Initializing ... "));
|
|
// low ("space") frequency: 434.0 MHz
|
|
// frequency shift: 270 Hz
|
|
// baud rate: 100 baud
|
|
state = fsk4.begin(434.0, 270, 100);
|
|
if(state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while(true);
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("[FSK4] Sending FSK4 data packet ... "));
|
|
|
|
// send out idle condition for 1000 ms
|
|
fsk4.idle();
|
|
delay(1000);
|
|
|
|
// FSK4Client supports binary write methods
|
|
|
|
// send some bytes as a preamble
|
|
for(int i = 0; i < 8; i++) {
|
|
fsk4.write(0x1B);
|
|
}
|
|
|
|
// now send the encoded packet
|
|
fsk4.write(horusPacket, horusPacketLen);
|
|
|
|
Serial.println(F("done!"));
|
|
|
|
// wait for a second before transmitting again
|
|
delay(1000);
|
|
}
|