96 lines
2.5 KiB
C++
96 lines
2.5 KiB
C++
/*
|
|
RadioLib nRF24 Transmit Example
|
|
|
|
This example transmits packets using nRF24 2.4 GHz radio module.
|
|
Each packet contains up to 32 bytes of data, in the form of:
|
|
- Arduino String
|
|
- null-terminated char array (C-string)
|
|
- arbitrary binary data (byte array)
|
|
|
|
Packet delivery is automatically acknowledged by the receiver.
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration#nrf24
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
*/
|
|
|
|
// include the library
|
|
#include <RadioLib.h>
|
|
|
|
// nRF24 has the following connections:
|
|
// CS pin: 10
|
|
// IRQ pin: 2
|
|
// CE pin: 3
|
|
nRF24 radio = new Module(10, 2, 3);
|
|
|
|
// or using RadioShield
|
|
// https://github.com/jgromes/RadioShield
|
|
//nRF24 radio = RadioShield.ModuleA;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize nRF24 with default settings
|
|
Serial.print(F("[nRF24] Initializing ... "));
|
|
int state = radio.begin();
|
|
if(state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while(true);
|
|
}
|
|
|
|
// set transmit address
|
|
// NOTE: address width in bytes MUST be equal to the
|
|
// width set in begin() or setAddressWidth()
|
|
// methods (5 by default)
|
|
byte addr[] = {0x01, 0x23, 0x45, 0x67, 0x89};
|
|
Serial.print(F("[nRF24] Setting transmit pipe ... "));
|
|
state = radio.setTransmitPipe(addr);
|
|
if(state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while(true);
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("[nRF24] Transmitting packet ... "));
|
|
|
|
// you can transmit C-string or Arduino string up to
|
|
// 32 characters long
|
|
int state = radio.transmit("Hello World!");
|
|
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
// the packet was successfully transmitted
|
|
Serial.println(F("success!"));
|
|
|
|
} else if (state == RADIOLIB_ERR_PACKET_TOO_LONG) {
|
|
// the supplied packet was longer than 32 bytes
|
|
Serial.println(F("too long!"));
|
|
|
|
} else if (state == RADIOLIB_ERR_ACK_NOT_RECEIVED) {
|
|
// acknowledge from destination module
|
|
// was not received within 15 retries
|
|
Serial.println(F("ACK not received!"));
|
|
|
|
} else if (state == RADIOLIB_ERR_TX_TIMEOUT) {
|
|
// timed out while transmitting
|
|
Serial.println(F("timeout!"));
|
|
|
|
} else {
|
|
// some other error occurred
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
|
|
}
|
|
|
|
// wait for a second before transmitting again
|
|
delay(1000);
|
|
}
|