97 lines
2.5 KiB
C++
97 lines
2.5 KiB
C++
/*
|
|
RadioLib nRF24 Receive Example
|
|
|
|
This example listens for FSK transmissions using nRF24 2.4 GHz radio module.
|
|
To successfully receive data, the following settings have to be the same
|
|
on both transmitter and receiver:
|
|
- carrier frequency
|
|
- data rate
|
|
- transmit pipe on transmitter must match receive pipe
|
|
on receiver
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration#nrf24
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
*/
|
|
|
|
// include the library
|
|
#include <RadioLib.h>
|
|
|
|
// nRF24 has the following connections:
|
|
// CS pin: 10
|
|
// IRQ pin: 2
|
|
// CE pin: 3
|
|
nRF24 radio = new Module(10, 2, 3);
|
|
|
|
// or using RadioShield
|
|
// https://github.com/jgromes/RadioShield
|
|
//nRF24 radio = RadioShield.ModuleA;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize nRF24 with default settings
|
|
Serial.print(F("[nRF24] Initializing ... "));
|
|
int state = radio.begin();
|
|
if(state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while(true);
|
|
}
|
|
|
|
// set receive pipe 0 address
|
|
// NOTE: address width in bytes MUST be equal to the
|
|
// width set in begin() or setAddressWidth()
|
|
// methods (5 by default)
|
|
Serial.print(F("[nRF24] Setting address for receive pipe 0 ... "));
|
|
byte addr[] = {0x01, 0x23, 0x45, 0x67, 0x89};
|
|
state = radio.setReceivePipe(0, addr);
|
|
if(state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while(true);
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("[nRF24] Waiting for incoming transmission ... "));
|
|
|
|
// you can receive data as an Arduino String
|
|
// NOTE: receive() is a blocking method!
|
|
// See example ReceiveInterrupt for details
|
|
// on non-blocking reception method.
|
|
String str;
|
|
int state = radio.receive(str);
|
|
|
|
// you can also receive data as byte array
|
|
/*
|
|
byte byteArr[8];
|
|
int state = radio.receive(byteArr, 8);
|
|
*/
|
|
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
// packet was successfully received
|
|
Serial.println(F("success!"));
|
|
|
|
// print the data of the packet
|
|
Serial.print(F("[nRF24] Data:\t\t"));
|
|
Serial.println(str);
|
|
|
|
} else if (state == RADIOLIB_ERR_RX_TIMEOUT) {
|
|
// timeout occurred while waiting for a packet
|
|
Serial.println(F("timeout!"));
|
|
|
|
} else {
|
|
// some other error occurred
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
|
|
}
|
|
}
|