76 lines
1.9 KiB
C++
76 lines
1.9 KiB
C++
/*
|
|
RadioLib CC1101 Transmit Example
|
|
|
|
This example transmits packets using CC1101 FSK radio module.
|
|
Each packet contains up to 64 bytes of data, in the form of:
|
|
- Arduino String
|
|
- null-terminated char array (C-string)
|
|
- arbitrary binary data (byte array)
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
*/
|
|
|
|
// include the library
|
|
#include <RadioLib.h>
|
|
|
|
// CC1101 has the following connections:
|
|
// CS pin: 10
|
|
// GDO0 pin: 2
|
|
// RST pin: unused
|
|
// GDO2 pin: 3 (optional)
|
|
CC1101 radio = new Module(10, 2, RADIOLIB_NC, 3);
|
|
|
|
// or using RadioShield
|
|
// https://github.com/jgromes/RadioShield
|
|
//CC1101 radio = RadioShield.ModuleA;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize CC1101 with default settings
|
|
Serial.print(F("[CC1101] Initializing ... "));
|
|
int state = radio.begin();
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true);
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("[CC1101] Transmitting packet ... "));
|
|
|
|
// you can transmit C-string or Arduino string up to 63 characters long
|
|
int state = radio.transmit("Hello World!");
|
|
|
|
// you can also transmit byte array up to 63 bytes long
|
|
/*
|
|
byte byteArr[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF};
|
|
int state = radio.transmit(byteArr, 8);
|
|
*/
|
|
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
// the packet was successfully transmitted
|
|
Serial.println(F("success!"));
|
|
|
|
} else if (state == RADIOLIB_ERR_PACKET_TOO_LONG) {
|
|
// the supplied packet was longer than 64 bytes
|
|
Serial.println(F("too long!"));
|
|
|
|
} else {
|
|
// some other error occurred
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
|
|
}
|
|
|
|
// wait for a second before transmitting again
|
|
delay(1000);
|
|
}
|