231 lines
8.3 KiB
Arduino
231 lines
8.3 KiB
Arduino
|
/*******************************************************************************
|
||
|
|
* Touch Calibration tool for helping other example touchscreen support
|
||
|
|
*
|
||
|
|
* For resistive touchscreen, you can follow the display hint for calibration.
|
||
|
|
* And then copy the serial output result to touch.h.
|
||
|
|
*
|
||
|
|
* For capacitive touchscreen, it should no need to calibrate.
|
||
|
|
* This tool just help you check the connection and orientation.
|
||
|
|
*
|
||
|
|
* Resistive touchscreen libraries
|
||
|
|
* XPT2046: https://github.com/PaulStoffregen/XPT2046_Touchscreen.git
|
||
|
|
*
|
||
|
|
* Capacitive touchscreen libraries
|
||
|
|
* TouchLib: https://github.com/mmMicky/TouchLib.git
|
||
|
|
******************************************************************************/
|
||
|
|
|
||
|
|
/*******************************************************************************
|
||
|
|
* Please config the touch panel in touch.h
|
||
|
|
******************************************************************************/
|
||
|
|
#include "touch.h"
|
||
|
|
|
||
|
|
/*******************************************************************************
|
||
|
|
* Start of Arduino_GFX setting
|
||
|
|
*
|
||
|
|
* Arduino_GFX try to find the settings depends on selected board in Arduino IDE
|
||
|
|
* Or you can define the display dev kit not in the board list
|
||
|
|
* Defalult pin list for non display dev kit:
|
||
|
|
* Arduino Nano, Micro and more: CS: 9, DC: 8, RST: 7, BL: 6, SCK: 13, MOSI: 11, MISO: 12
|
||
|
|
* ESP32 various dev board : CS: 5, DC: 27, RST: 33, BL: 22, SCK: 18, MOSI: 23, MISO: nil
|
||
|
|
* ESP32-C3 various dev board : CS: 7, DC: 2, RST: 1, BL: 3, SCK: 4, MOSI: 6, MISO: nil
|
||
|
|
* ESP32-S2 various dev board : CS: 34, DC: 38, RST: 33, BL: 21, SCK: 36, MOSI: 35, MISO: nil
|
||
|
|
* ESP32-S3 various dev board : CS: 40, DC: 41, RST: 42, BL: 48, SCK: 36, MOSI: 35, MISO: nil
|
||
|
|
* ESP8266 various dev board : CS: 15, DC: 4, RST: 2, BL: 5, SCK: 14, MOSI: 13, MISO: 12
|
||
|
|
* Raspberry Pi Pico dev board : CS: 17, DC: 27, RST: 26, BL: 28, SCK: 18, MOSI: 19, MISO: 16
|
||
|
|
* RTL8720 BW16 old patch core : CS: 18, DC: 17, RST: 2, BL: 23, SCK: 19, MOSI: 21, MISO: 20
|
||
|
|
* RTL8720_BW16 Official core : CS: 9, DC: 8, RST: 6, BL: 3, SCK: 10, MOSI: 12, MISO: 11
|
||
|
|
* RTL8722 dev board : CS: 18, DC: 17, RST: 22, BL: 23, SCK: 13, MOSI: 11, MISO: 12
|
||
|
|
* RTL8722_mini dev board : CS: 12, DC: 14, RST: 15, BL: 13, SCK: 11, MOSI: 9, MISO: 10
|
||
|
|
* Seeeduino XIAO dev board : CS: 3, DC: 2, RST: 1, BL: 0, SCK: 8, MOSI: 10, MISO: 9
|
||
|
|
* Teensy 4.1 dev board : CS: 39, DC: 41, RST: 40, BL: 22, SCK: 13, MOSI: 11, MISO: 12
|
||
|
|
******************************************************************************/
|
||
|
|
#include <Arduino_GFX_Library.h>
|
||
|
|
|
||
|
|
#define GFX_BL DF_GFX_BL // default backlight pin, you may replace DF_GFX_BL to actual backlight pin
|
||
|
|
|
||
|
|
/* More dev device declaration: https://github.com/moononournation/Arduino_GFX/wiki/Dev-Device-Declaration */
|
||
|
|
#if defined(DISPLAY_DEV_KIT)
|
||
|
|
Arduino_GFX *gfx = create_default_Arduino_GFX();
|
||
|
|
#else /* !defined(DISPLAY_DEV_KIT) */
|
||
|
|
|
||
|
|
/* More data bus class: https://github.com/moononournation/Arduino_GFX/wiki/Data-Bus-Class */
|
||
|
|
Arduino_DataBus *bus = create_default_Arduino_DataBus();
|
||
|
|
|
||
|
|
/* More display class: https://github.com/moononournation/Arduino_GFX/wiki/Display-Class */
|
||
|
|
Arduino_GFX *gfx = new Arduino_ILI9341(bus, DF_GFX_RST, 0 /* rotation */, false /* IPS */);
|
||
|
|
|
||
|
|
#endif /* !defined(DISPLAY_DEV_KIT) */
|
||
|
|
/*******************************************************************************
|
||
|
|
* End of Arduino_GFX setting
|
||
|
|
******************************************************************************/
|
||
|
|
|
||
|
|
int16_t w = -1, h = -1;
|
||
|
|
int16_t point_x[4] = {-1};
|
||
|
|
int16_t point_y[4] = {-1};
|
||
|
|
int16_t current_point = -1, next_point = 0;
|
||
|
|
int16_t touched_x[4] = {-1};
|
||
|
|
int16_t touched_y[4] = {-1};
|
||
|
|
|
||
|
|
void setup(void)
|
||
|
|
{
|
||
|
|
Serial.begin(115200);
|
||
|
|
// Serial.setDebugOutput(true);
|
||
|
|
// while(!Serial);
|
||
|
|
Serial.println("Touch Calibration");
|
||
|
|
|
||
|
|
#ifdef GFX_EXTRA_PRE_INIT
|
||
|
|
GFX_EXTRA_PRE_INIT();
|
||
|
|
#endif
|
||
|
|
|
||
|
|
Serial.println("Init display");
|
||
|
|
gfx->begin();
|
||
|
|
gfx->fillScreen(BLACK);
|
||
|
|
|
||
|
|
#ifdef GFX_BL
|
||
|
|
pinMode(GFX_BL, OUTPUT);
|
||
|
|
digitalWrite(GFX_BL, HIGH);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
// Init touch device
|
||
|
|
w = gfx->width();
|
||
|
|
h = gfx->height();
|
||
|
|
touch_init(w, h, gfx->getRotation());
|
||
|
|
|
||
|
|
// Top left
|
||
|
|
point_x[0] = w / 8;
|
||
|
|
point_y[0] = h / 8;
|
||
|
|
// Top right
|
||
|
|
point_x[1] = point_x[0] * 7;
|
||
|
|
point_y[1] = point_y[0];
|
||
|
|
// Bottom left
|
||
|
|
point_x[2] = point_x[0];
|
||
|
|
point_y[2] = point_y[0] * 7;
|
||
|
|
// Bottom right
|
||
|
|
point_x[3] = point_x[1];
|
||
|
|
point_y[3] = point_y[2];
|
||
|
|
|
||
|
|
gfx->setCursor(0, 0);
|
||
|
|
gfx->setTextColor(RED);
|
||
|
|
gfx->setTextSize(2);
|
||
|
|
gfx->println("Touch Calibration");
|
||
|
|
}
|
||
|
|
|
||
|
|
void loop()
|
||
|
|
{
|
||
|
|
if (current_point != next_point)
|
||
|
|
{
|
||
|
|
current_point = next_point;
|
||
|
|
|
||
|
|
gfx->drawLine(
|
||
|
|
point_x[current_point] - 5,
|
||
|
|
point_y[current_point] - 5,
|
||
|
|
point_x[current_point] + 5,
|
||
|
|
point_y[current_point] + 5,
|
||
|
|
RED);
|
||
|
|
gfx->drawLine(
|
||
|
|
point_x[current_point] + 5,
|
||
|
|
point_y[current_point] - 5,
|
||
|
|
point_x[current_point] - 5,
|
||
|
|
point_y[current_point] + 5,
|
||
|
|
RED);
|
||
|
|
}
|
||
|
|
|
||
|
|
if (touch_touched())
|
||
|
|
{
|
||
|
|
int32_t total_x = touch_raw_x, total_y = touch_raw_y;
|
||
|
|
int count = 1;
|
||
|
|
while (touch_touched())
|
||
|
|
{
|
||
|
|
total_x += touch_raw_x;
|
||
|
|
total_y += touch_raw_y;
|
||
|
|
count++;
|
||
|
|
// Serial.printf("touch_raw_x: %d, touch_raw_y: %d, count: %d\n", touch_raw_x, touch_raw_y, count);
|
||
|
|
}
|
||
|
|
touched_x[current_point] = total_x / count;
|
||
|
|
touched_y[current_point] = total_y / count;
|
||
|
|
// Serial.printf("touched_x: %d, touched_y: %d\n", touched_x[current_point], touched_y[current_point]);
|
||
|
|
|
||
|
|
if (current_point == 3)
|
||
|
|
{
|
||
|
|
Serial.printf("touched_x[0]: %d, touched_y[0]: %d\n", touched_x[0], touched_y[0]);
|
||
|
|
Serial.printf("touched_x[1]: %d, touched_y[1]: %d\n", touched_x[1], touched_y[1]);
|
||
|
|
Serial.printf("touched_x[2]: %d, touched_y[2]: %d\n", touched_x[2], touched_y[2]);
|
||
|
|
Serial.printf("touched_x[3]: %d, touched_y[3]: %d\n", touched_x[3], touched_y[3]);
|
||
|
|
uint16_t delta_x = (touched_x[0] > touched_x[1]) ? (touched_x[0] - touched_x[1]) : (touched_x[1] - touched_x[0]);
|
||
|
|
uint16_t delta_y = (touched_y[0] > touched_y[1]) ? (touched_y[0] - touched_y[1]) : (touched_y[1] - touched_y[0]);
|
||
|
|
|
||
|
|
if (delta_x > delta_y)
|
||
|
|
{
|
||
|
|
touch_swap_xy = false;
|
||
|
|
touch_map_x1 = (touched_x[0] + touched_x[2]) / 2;
|
||
|
|
touch_map_x2 = (touched_x[1] + touched_x[3]) / 2;
|
||
|
|
touch_map_y1 = (touched_y[0] + touched_y[1]) / 2;
|
||
|
|
touch_map_y2 = (touched_y[2] + touched_y[3]) / 2;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
touch_swap_xy = true;
|
||
|
|
touch_map_x1 = (touched_y[0] + touched_y[2]) / 2;
|
||
|
|
touch_map_x2 = (touched_y[1] + touched_y[3]) / 2;
|
||
|
|
touch_map_y1 = (touched_x[0] + touched_x[1]) / 2;
|
||
|
|
touch_map_y2 = (touched_x[2] + touched_x[3]) / 2;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (touch_map_x1 > touch_map_x2)
|
||
|
|
{
|
||
|
|
delta_x = (touch_map_x1 - touch_map_x2) / 6;
|
||
|
|
touch_map_x1 += delta_x;
|
||
|
|
touch_map_x2 -= delta_x;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
delta_x = (touch_map_x2 - touch_map_x1) / 6;
|
||
|
|
touch_map_x1 -= delta_x;
|
||
|
|
touch_map_x2 += delta_x;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (touch_map_y1 > touch_map_y2)
|
||
|
|
{
|
||
|
|
delta_y = (touch_map_y1 - touch_map_y2) / 6;
|
||
|
|
touch_map_y1 += delta_y;
|
||
|
|
touch_map_y2 -= delta_y;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
delta_y = (touch_map_y2 - touch_map_y1) / 6;
|
||
|
|
touch_map_y1 -= delta_y;
|
||
|
|
touch_map_y2 += delta_y;
|
||
|
|
}
|
||
|
|
|
||
|
|
Serial.printf("bool touch_swap_xy = %s;\n", touch_swap_xy ? "true" : "false");
|
||
|
|
Serial.printf("int16_t touch_map_x1 = %d;\n", touch_map_x1);
|
||
|
|
Serial.printf("int16_t touch_map_x2 = %d;\n", touch_map_x2);
|
||
|
|
Serial.printf("int16_t touch_map_y1 = %d;\n", touch_map_y1);
|
||
|
|
Serial.printf("int16_t touch_map_y2 = %d;\n", touch_map_y2);
|
||
|
|
|
||
|
|
gfx->setCursor(0, point_y[0] + 10);
|
||
|
|
gfx->setTextColor(WHITE);
|
||
|
|
gfx->setTextSize(1);
|
||
|
|
gfx->printf("bool touch_swap_xy = %s;\n", touch_swap_xy ? "true" : "false");
|
||
|
|
gfx->printf("int16_t touch_map_x1 = %d;\n", touch_map_x1);
|
||
|
|
gfx->printf("int16_t touch_map_x2 = %d;\n", touch_map_x2);
|
||
|
|
gfx->printf("int16_t touch_map_y1 = %d;\n", touch_map_y1);
|
||
|
|
gfx->printf("int16_t touch_map_y2 = %d;\n", touch_map_y2);
|
||
|
|
|
||
|
|
// wait next touch to continue
|
||
|
|
while (!touch_touched())
|
||
|
|
;
|
||
|
|
|
||
|
|
gfx->fillScreen(BLACK);
|
||
|
|
gfx->setCursor(0, 0);
|
||
|
|
gfx->setTextColor(RED);
|
||
|
|
gfx->setTextSize(2);
|
||
|
|
gfx->println("Touch Calibration");
|
||
|
|
}
|
||
|
|
|
||
|
|
next_point = (current_point == 3) ? 0 : (current_point + 1);
|
||
|
|
}
|
||
|
|
|
||
|
|
delay(100);
|
||
|
|
}
|