346 lines
13 KiB
C++
346 lines
13 KiB
C++
|
// The following touch screen support code by maxpautsch was merged 1/10/17
|
||
|
|
// https://github.com/maxpautsch
|
||
|
|
|
||
|
|
// Define TOUCH_CS is the user setup file to enable this code
|
||
|
|
|
||
|
|
// A demo is provided in examples Generic folder
|
||
|
|
|
||
|
|
// Additions by Bodmer to double sample, use Z value to improve detection reliability
|
||
|
|
// and to correct rotation handling
|
||
|
|
|
||
|
|
// See license in root directory.
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: begin_touch_read_write - was spi_begin_touch
|
||
|
|
** Description: Start transaction and select touch controller
|
||
|
|
***************************************************************************************/
|
||
|
|
// The touch controller has a low SPI clock rate
|
||
|
|
inline void TFT_eSPI::begin_touch_read_write(void){
|
||
|
|
DMA_BUSY_CHECK;
|
||
|
|
CS_H; // Just in case it has been left low
|
||
|
|
#if defined (SPI_HAS_TRANSACTION) && defined (SUPPORT_TRANSACTIONS)
|
||
|
|
if (locked) {locked = false; spi.beginTransaction(SPISettings(SPI_TOUCH_FREQUENCY, MSBFIRST, SPI_MODE0));}
|
||
|
|
#else
|
||
|
|
spi.setFrequency(SPI_TOUCH_FREQUENCY);
|
||
|
|
#endif
|
||
|
|
SET_BUS_READ_MODE;
|
||
|
|
T_CS_L;
|
||
|
|
}
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: end_touch_read_write - was spi_end_touch
|
||
|
|
** Description: End transaction and deselect touch controller
|
||
|
|
***************************************************************************************/
|
||
|
|
inline void TFT_eSPI::end_touch_read_write(void){
|
||
|
|
T_CS_H;
|
||
|
|
#if defined (SPI_HAS_TRANSACTION) && defined (SUPPORT_TRANSACTIONS)
|
||
|
|
if(!inTransaction) {if (!locked) {locked = true; spi.endTransaction();}}
|
||
|
|
#else
|
||
|
|
spi.setFrequency(SPI_FREQUENCY);
|
||
|
|
#endif
|
||
|
|
//SET_BUS_WRITE_MODE;
|
||
|
|
}
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: Legacy - deprecated
|
||
|
|
** Description: Start/end transaction
|
||
|
|
***************************************************************************************/
|
||
|
|
void TFT_eSPI::spi_begin_touch() {begin_touch_read_write();}
|
||
|
|
void TFT_eSPI::spi_end_touch() { end_touch_read_write();}
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: getTouchRaw
|
||
|
|
** Description: read raw touch position. Always returns true.
|
||
|
|
***************************************************************************************/
|
||
|
|
uint8_t TFT_eSPI::getTouchRaw(uint16_t *x, uint16_t *y){
|
||
|
|
uint16_t tmp;
|
||
|
|
|
||
|
|
begin_touch_read_write();
|
||
|
|
|
||
|
|
// Start YP sample request for x position, read 4 times and keep last sample
|
||
|
|
spi.transfer(0xd0); // Start new YP conversion
|
||
|
|
spi.transfer(0); // Read first 8 bits
|
||
|
|
spi.transfer(0xd0); // Read last 8 bits and start new YP conversion
|
||
|
|
spi.transfer(0); // Read first 8 bits
|
||
|
|
spi.transfer(0xd0); // Read last 8 bits and start new YP conversion
|
||
|
|
spi.transfer(0); // Read first 8 bits
|
||
|
|
spi.transfer(0xd0); // Read last 8 bits and start new YP conversion
|
||
|
|
|
||
|
|
tmp = spi.transfer(0); // Read first 8 bits
|
||
|
|
tmp = tmp <<5;
|
||
|
|
tmp |= 0x1f & (spi.transfer(0x90)>>3); // Read last 8 bits and start new XP conversion
|
||
|
|
|
||
|
|
*x = tmp;
|
||
|
|
|
||
|
|
// Start XP sample request for y position, read 4 times and keep last sample
|
||
|
|
spi.transfer(0); // Read first 8 bits
|
||
|
|
spi.transfer(0x90); // Read last 8 bits and start new XP conversion
|
||
|
|
spi.transfer(0); // Read first 8 bits
|
||
|
|
spi.transfer(0x90); // Read last 8 bits and start new XP conversion
|
||
|
|
spi.transfer(0); // Read first 8 bits
|
||
|
|
spi.transfer(0x90); // Read last 8 bits and start new XP conversion
|
||
|
|
|
||
|
|
tmp = spi.transfer(0); // Read first 8 bits
|
||
|
|
tmp = tmp <<5;
|
||
|
|
tmp |= 0x1f & (spi.transfer(0)>>3); // Read last 8 bits
|
||
|
|
|
||
|
|
*y = tmp;
|
||
|
|
|
||
|
|
end_touch_read_write();
|
||
|
|
|
||
|
|
return true;
|
||
|
|
}
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: getTouchRawZ
|
||
|
|
** Description: read raw pressure on touchpad and return Z value.
|
||
|
|
***************************************************************************************/
|
||
|
|
uint16_t TFT_eSPI::getTouchRawZ(void){
|
||
|
|
|
||
|
|
begin_touch_read_write();
|
||
|
|
|
||
|
|
// Z sample request
|
||
|
|
int16_t tz = 0xFFF;
|
||
|
|
spi.transfer(0xb0); // Start new Z1 conversion
|
||
|
|
tz += spi.transfer16(0xc0) >> 3; // Read Z1 and start Z2 conversion
|
||
|
|
tz -= spi.transfer16(0x00) >> 3; // Read Z2
|
||
|
|
|
||
|
|
end_touch_read_write();
|
||
|
|
|
||
|
|
if (tz == 4095) tz = 0;
|
||
|
|
|
||
|
|
return (uint16_t)tz;
|
||
|
|
}
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: validTouch
|
||
|
|
** Description: read validated position. Return false if not pressed.
|
||
|
|
***************************************************************************************/
|
||
|
|
#define _RAWERR 20 // Deadband error allowed in successive position samples
|
||
|
|
uint8_t TFT_eSPI::validTouch(uint16_t *x, uint16_t *y, uint16_t threshold){
|
||
|
|
uint16_t x_tmp, y_tmp, x_tmp2, y_tmp2;
|
||
|
|
|
||
|
|
// Wait until pressure stops increasing to debounce pressure
|
||
|
|
uint16_t z1 = 1;
|
||
|
|
uint16_t z2 = 0;
|
||
|
|
while (z1 > z2)
|
||
|
|
{
|
||
|
|
z2 = z1;
|
||
|
|
z1 = getTouchRawZ();
|
||
|
|
delay(1);
|
||
|
|
}
|
||
|
|
|
||
|
|
// Serial.print("Z = ");Serial.println(z1);
|
||
|
|
|
||
|
|
if (z1 <= threshold) return false;
|
||
|
|
|
||
|
|
getTouchRaw(&x_tmp,&y_tmp);
|
||
|
|
|
||
|
|
// Serial.print("Sample 1 x,y = "); Serial.print(x_tmp);Serial.print(",");Serial.print(y_tmp);
|
||
|
|
// Serial.print(", Z = ");Serial.println(z1);
|
||
|
|
|
||
|
|
delay(1); // Small delay to the next sample
|
||
|
|
if (getTouchRawZ() <= threshold) return false;
|
||
|
|
|
||
|
|
delay(2); // Small delay to the next sample
|
||
|
|
getTouchRaw(&x_tmp2,&y_tmp2);
|
||
|
|
|
||
|
|
// Serial.print("Sample 2 x,y = "); Serial.print(x_tmp2);Serial.print(",");Serial.println(y_tmp2);
|
||
|
|
// Serial.print("Sample difference = ");Serial.print(abs(x_tmp - x_tmp2));Serial.print(",");Serial.println(abs(y_tmp - y_tmp2));
|
||
|
|
|
||
|
|
if (abs(x_tmp - x_tmp2) > _RAWERR) return false;
|
||
|
|
if (abs(y_tmp - y_tmp2) > _RAWERR) return false;
|
||
|
|
|
||
|
|
*x = x_tmp;
|
||
|
|
*y = y_tmp;
|
||
|
|
|
||
|
|
return true;
|
||
|
|
}
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: getTouch
|
||
|
|
** Description: read callibrated position. Return false if not pressed.
|
||
|
|
***************************************************************************************/
|
||
|
|
#define Z_THRESHOLD 350 // Touch pressure threshold for validating touches
|
||
|
|
uint8_t TFT_eSPI::getTouch(uint16_t *x, uint16_t *y, uint16_t threshold){
|
||
|
|
uint16_t x_tmp, y_tmp;
|
||
|
|
|
||
|
|
if (threshold<20) threshold = 20;
|
||
|
|
if (_pressTime > millis()) threshold=20;
|
||
|
|
|
||
|
|
uint8_t n = 5;
|
||
|
|
uint8_t valid = 0;
|
||
|
|
while (n--)
|
||
|
|
{
|
||
|
|
if (validTouch(&x_tmp, &y_tmp, threshold)) valid++;;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (valid<1) { _pressTime = 0; return false; }
|
||
|
|
|
||
|
|
_pressTime = millis() + 50;
|
||
|
|
|
||
|
|
convertRawXY(&x_tmp, &y_tmp);
|
||
|
|
|
||
|
|
if (x_tmp >= _width || y_tmp >= _height) return false;
|
||
|
|
|
||
|
|
_pressX = x_tmp;
|
||
|
|
_pressY = y_tmp;
|
||
|
|
*x = _pressX;
|
||
|
|
*y = _pressY;
|
||
|
|
return valid;
|
||
|
|
}
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: convertRawXY
|
||
|
|
** Description: convert raw touch x,y values to screen coordinates
|
||
|
|
***************************************************************************************/
|
||
|
|
void TFT_eSPI::convertRawXY(uint16_t *x, uint16_t *y)
|
||
|
|
{
|
||
|
|
uint16_t x_tmp = *x, y_tmp = *y, xx, yy;
|
||
|
|
|
||
|
|
if(!touchCalibration_rotate){
|
||
|
|
xx=(x_tmp-touchCalibration_x0)*_width/touchCalibration_x1;
|
||
|
|
yy=(y_tmp-touchCalibration_y0)*_height/touchCalibration_y1;
|
||
|
|
if(touchCalibration_invert_x)
|
||
|
|
xx = _width - xx;
|
||
|
|
if(touchCalibration_invert_y)
|
||
|
|
yy = _height - yy;
|
||
|
|
} else {
|
||
|
|
xx=(y_tmp-touchCalibration_x0)*_width/touchCalibration_x1;
|
||
|
|
yy=(x_tmp-touchCalibration_y0)*_height/touchCalibration_y1;
|
||
|
|
if(touchCalibration_invert_x)
|
||
|
|
xx = _width - xx;
|
||
|
|
if(touchCalibration_invert_y)
|
||
|
|
yy = _height - yy;
|
||
|
|
}
|
||
|
|
*x = xx;
|
||
|
|
*y = yy;
|
||
|
|
}
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: calibrateTouch
|
||
|
|
** Description: generates calibration parameters for touchscreen.
|
||
|
|
***************************************************************************************/
|
||
|
|
void TFT_eSPI::calibrateTouch(uint16_t *parameters, uint32_t color_fg, uint32_t color_bg, uint8_t size){
|
||
|
|
int16_t values[] = {0,0,0,0,0,0,0,0};
|
||
|
|
uint16_t x_tmp, y_tmp;
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
for(uint8_t i = 0; i<4; i++){
|
||
|
|
fillRect(0, 0, size+1, size+1, color_bg);
|
||
|
|
fillRect(0, _height-size-1, size+1, size+1, color_bg);
|
||
|
|
fillRect(_width-size-1, 0, size+1, size+1, color_bg);
|
||
|
|
fillRect(_width-size-1, _height-size-1, size+1, size+1, color_bg);
|
||
|
|
|
||
|
|
if (i == 5) break; // used to clear the arrows
|
||
|
|
|
||
|
|
switch (i) {
|
||
|
|
case 0: // up left
|
||
|
|
drawLine(0, 0, 0, size, color_fg);
|
||
|
|
drawLine(0, 0, size, 0, color_fg);
|
||
|
|
drawLine(0, 0, size , size, color_fg);
|
||
|
|
break;
|
||
|
|
case 1: // bot left
|
||
|
|
drawLine(0, _height-size-1, 0, _height-1, color_fg);
|
||
|
|
drawLine(0, _height-1, size, _height-1, color_fg);
|
||
|
|
drawLine(size, _height-size-1, 0, _height-1 , color_fg);
|
||
|
|
break;
|
||
|
|
case 2: // up right
|
||
|
|
drawLine(_width-size-1, 0, _width-1, 0, color_fg);
|
||
|
|
drawLine(_width-size-1, size, _width-1, 0, color_fg);
|
||
|
|
drawLine(_width-1, size, _width-1, 0, color_fg);
|
||
|
|
break;
|
||
|
|
case 3: // bot right
|
||
|
|
drawLine(_width-size-1, _height-size-1, _width-1, _height-1, color_fg);
|
||
|
|
drawLine(_width-1, _height-1-size, _width-1, _height-1, color_fg);
|
||
|
|
drawLine(_width-1-size, _height-1, _width-1, _height-1, color_fg);
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
// user has to get the chance to release
|
||
|
|
if(i>0) delay(1000);
|
||
|
|
|
||
|
|
for(uint8_t j= 0; j<8; j++){
|
||
|
|
// Use a lower detect threshold as corners tend to be less sensitive
|
||
|
|
while(!validTouch(&x_tmp, &y_tmp, Z_THRESHOLD/2));
|
||
|
|
values[i*2 ] += x_tmp;
|
||
|
|
values[i*2+1] += y_tmp;
|
||
|
|
}
|
||
|
|
values[i*2 ] /= 8;
|
||
|
|
values[i*2+1] /= 8;
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
// from case 0 to case 1, the y value changed.
|
||
|
|
// If the measured delta of the touch x axis is bigger than the delta of the y axis, the touch and TFT axes are switched.
|
||
|
|
touchCalibration_rotate = false;
|
||
|
|
if(abs(values[0]-values[2]) > abs(values[1]-values[3])){
|
||
|
|
touchCalibration_rotate = true;
|
||
|
|
touchCalibration_x0 = (values[1] + values[3])/2; // calc min x
|
||
|
|
touchCalibration_x1 = (values[5] + values[7])/2; // calc max x
|
||
|
|
touchCalibration_y0 = (values[0] + values[4])/2; // calc min y
|
||
|
|
touchCalibration_y1 = (values[2] + values[6])/2; // calc max y
|
||
|
|
} else {
|
||
|
|
touchCalibration_x0 = (values[0] + values[2])/2; // calc min x
|
||
|
|
touchCalibration_x1 = (values[4] + values[6])/2; // calc max x
|
||
|
|
touchCalibration_y0 = (values[1] + values[5])/2; // calc min y
|
||
|
|
touchCalibration_y1 = (values[3] + values[7])/2; // calc max y
|
||
|
|
}
|
||
|
|
|
||
|
|
// in addition, the touch screen axis could be in the opposite direction of the TFT axis
|
||
|
|
touchCalibration_invert_x = false;
|
||
|
|
if(touchCalibration_x0 > touchCalibration_x1){
|
||
|
|
values[0]=touchCalibration_x0;
|
||
|
|
touchCalibration_x0 = touchCalibration_x1;
|
||
|
|
touchCalibration_x1 = values[0];
|
||
|
|
touchCalibration_invert_x = true;
|
||
|
|
}
|
||
|
|
touchCalibration_invert_y = false;
|
||
|
|
if(touchCalibration_y0 > touchCalibration_y1){
|
||
|
|
values[0]=touchCalibration_y0;
|
||
|
|
touchCalibration_y0 = touchCalibration_y1;
|
||
|
|
touchCalibration_y1 = values[0];
|
||
|
|
touchCalibration_invert_y = true;
|
||
|
|
}
|
||
|
|
|
||
|
|
// pre calculate
|
||
|
|
touchCalibration_x1 -= touchCalibration_x0;
|
||
|
|
touchCalibration_y1 -= touchCalibration_y0;
|
||
|
|
|
||
|
|
if(touchCalibration_x0 == 0) touchCalibration_x0 = 1;
|
||
|
|
if(touchCalibration_x1 == 0) touchCalibration_x1 = 1;
|
||
|
|
if(touchCalibration_y0 == 0) touchCalibration_y0 = 1;
|
||
|
|
if(touchCalibration_y1 == 0) touchCalibration_y1 = 1;
|
||
|
|
|
||
|
|
// export parameters, if pointer valid
|
||
|
|
if(parameters != NULL){
|
||
|
|
parameters[0] = touchCalibration_x0;
|
||
|
|
parameters[1] = touchCalibration_x1;
|
||
|
|
parameters[2] = touchCalibration_y0;
|
||
|
|
parameters[3] = touchCalibration_y1;
|
||
|
|
parameters[4] = touchCalibration_rotate | (touchCalibration_invert_x <<1) | (touchCalibration_invert_y <<2);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/***************************************************************************************
|
||
|
|
** Function name: setTouch
|
||
|
|
** Description: imports calibration parameters for touchscreen.
|
||
|
|
***************************************************************************************/
|
||
|
|
void TFT_eSPI::setTouch(uint16_t *parameters){
|
||
|
|
touchCalibration_x0 = parameters[0];
|
||
|
|
touchCalibration_x1 = parameters[1];
|
||
|
|
touchCalibration_y0 = parameters[2];
|
||
|
|
touchCalibration_y1 = parameters[3];
|
||
|
|
|
||
|
|
if(touchCalibration_x0 == 0) touchCalibration_x0 = 1;
|
||
|
|
if(touchCalibration_x1 == 0) touchCalibration_x1 = 1;
|
||
|
|
if(touchCalibration_y0 == 0) touchCalibration_y0 = 1;
|
||
|
|
if(touchCalibration_y1 == 0) touchCalibration_y1 = 1;
|
||
|
|
|
||
|
|
touchCalibration_rotate = parameters[4] & 0x01;
|
||
|
|
touchCalibration_invert_x = parameters[4] & 0x02;
|
||
|
|
touchCalibration_invert_y = parameters[4] & 0x04;
|
||
|
|
}
|