265 lines
7.4 KiB
C++
265 lines
7.4 KiB
C++
/*******************************************************************************
|
|
* Arduino VNC
|
|
* This is a simple VNC sample
|
|
*
|
|
* Dependent libraries:
|
|
* ArduinoVNC: https://github.com/moononournation/arduinoVNC.git
|
|
*
|
|
* Touch libraries:
|
|
* FT6X36: https://github.com/strange-v/FT6X36.git
|
|
* GT911: https://github.com/TAMCTec/gt911-arduino.git
|
|
* XPT2046: https://github.com/PaulStoffregen/XPT2046_Touchscreen.git
|
|
*
|
|
* Setup steps:
|
|
* 1. Fill your own SSID_NAME, SSID_PASSWORD, VNC_IP, VNC_PORT and VNC_PASSWORD
|
|
* 2. Change your LCD parameters in Arduino_GFX setting
|
|
******************************************************************************/
|
|
|
|
/* WiFi settings */
|
|
const char *SSID_NAME = "YourAP";
|
|
const char *SSID_PASSWORD = "PleaseInputYourPasswordHere";
|
|
|
|
const char *VNC_IP = "192.168.12.34";
|
|
const uint16_t VNC_PORT = 5901;
|
|
const char *VNC_PASSWORD = "PleaseInputYourPasswordHere";
|
|
|
|
/*******************************************************************************
|
|
* Please config the touch panel in touch.h
|
|
******************************************************************************/
|
|
#include "touch.h"
|
|
|
|
/*******************************************************************************
|
|
* Please config the optional keyboard in keyboard.h
|
|
******************************************************************************/
|
|
#include "keyboard.h"
|
|
|
|
/*******************************************************************************
|
|
* Start of Arduino_GFX setting
|
|
*
|
|
* Arduino_GFX try to find the settings depends on selected board in Arduino IDE
|
|
* Or you can define the display dev kit not in the board list
|
|
* Defalult pin list for non display dev kit:
|
|
* Arduino Nano, Micro and more: CS: 9, DC: 8, RST: 7, BL: 6, SCK: 13, MOSI: 11, MISO: 12
|
|
* ESP32 various dev board : CS: 5, DC: 27, RST: 33, BL: 22, SCK: 18, MOSI: 23, MISO: nil
|
|
* ESP32-C3 various dev board : CS: 7, DC: 2, RST: 1, BL: 3, SCK: 4, MOSI: 6, MISO: nil
|
|
* ESP32-S2 various dev board : CS: 34, DC: 38, RST: 33, BL: 21, SCK: 36, MOSI: 35, MISO: nil
|
|
* ESP32-S3 various dev board : CS: 40, DC: 41, RST: 42, BL: 48, SCK: 36, MOSI: 35, MISO: nil
|
|
* ESP8266 various dev board : CS: 15, DC: 4, RST: 2, BL: 5, SCK: 14, MOSI: 13, MISO: 12
|
|
* Raspberry Pi Pico dev board : CS: 17, DC: 27, RST: 26, BL: 28, SCK: 18, MOSI: 19, MISO: 16
|
|
* RTL8720 BW16 old patch core : CS: 18, DC: 17, RST: 2, BL: 23, SCK: 19, MOSI: 21, MISO: 20
|
|
* RTL8720_BW16 Official core : CS: 9, DC: 8, RST: 6, BL: 3, SCK: 10, MOSI: 12, MISO: 11
|
|
* RTL8722 dev board : CS: 18, DC: 17, RST: 22, BL: 23, SCK: 13, MOSI: 11, MISO: 12
|
|
* RTL8722_mini dev board : CS: 12, DC: 14, RST: 15, BL: 13, SCK: 11, MOSI: 9, MISO: 10
|
|
* Seeeduino XIAO dev board : CS: 3, DC: 2, RST: 1, BL: 0, SCK: 8, MOSI: 10, MISO: 9
|
|
* Teensy 4.1 dev board : CS: 39, DC: 41, RST: 40, BL: 22, SCK: 13, MOSI: 11, MISO: 12
|
|
******************************************************************************/
|
|
#include <Arduino_GFX_Library.h>
|
|
|
|
#define GFX_BL DF_GFX_BL // default backlight pin, you may replace DF_GFX_BL to actual backlight pin
|
|
|
|
/* More dev device declaration: https://github.com/moononournation/Arduino_GFX/wiki/Dev-Device-Declaration */
|
|
#if defined(DISPLAY_DEV_KIT)
|
|
Arduino_GFX *gfx = create_default_Arduino_GFX();
|
|
#else /* !defined(DISPLAY_DEV_KIT) */
|
|
|
|
/* More data bus class: https://github.com/moononournation/Arduino_GFX/wiki/Data-Bus-Class */
|
|
Arduino_DataBus *bus = create_default_Arduino_DataBus();
|
|
|
|
/* More display class: https://github.com/moononournation/Arduino_GFX/wiki/Display-Class */
|
|
Arduino_GFX *gfx = new Arduino_ILI9341(bus, DF_GFX_RST, 3 /* rotation */, false /* IPS */);
|
|
|
|
#endif /* !defined(DISPLAY_DEV_KIT) */
|
|
/*******************************************************************************
|
|
* End of Arduino_GFX setting
|
|
******************************************************************************/
|
|
|
|
#if defined(ESP32)
|
|
#include <WiFi.h>
|
|
#elif defined(ESP8266)
|
|
#include <ESP8266WiFi.h>
|
|
#elif defined(ARDUINO_RASPBERRY_PI_PICO_W)
|
|
#include <WiFi.h>
|
|
#elif defined(RTL8722DM)
|
|
#include <WiFi.h>
|
|
#endif
|
|
|
|
#include "VNC_GFX.h"
|
|
#include <VNC.h>
|
|
|
|
VNC_GFX *vnc_gfx = new VNC_GFX(gfx);
|
|
arduinoVNC vnc = arduinoVNC(vnc_gfx);
|
|
|
|
void TFTnoWifi(void)
|
|
{
|
|
gfx->fillScreen(BLACK);
|
|
gfx->setCursor(0, ((gfx->height() / 2) - (5 * 8)));
|
|
gfx->setTextColor(RED);
|
|
gfx->setTextSize(5);
|
|
gfx->println("NO WIFI!");
|
|
gfx->setTextSize(2);
|
|
gfx->println();
|
|
}
|
|
|
|
void TFTnoVNC(void)
|
|
{
|
|
gfx->fillScreen(BLACK);
|
|
gfx->setCursor(0, ((gfx->height() / 2) - (4 * 8)));
|
|
gfx->setTextColor(GREEN);
|
|
gfx->setTextSize(4);
|
|
gfx->println("connect VNC");
|
|
gfx->setTextSize(2);
|
|
gfx->println();
|
|
gfx->print(VNC_IP);
|
|
gfx->print(":");
|
|
gfx->println(VNC_PORT);
|
|
}
|
|
|
|
void handle_touch()
|
|
{
|
|
if (touch_has_signal())
|
|
{
|
|
if (touch_touched())
|
|
{
|
|
vnc.mouseEvent(touch_last_x, touch_last_y, 0b001);
|
|
}
|
|
else if (touch_released())
|
|
{
|
|
vnc.mouseEvent(touch_last_x, touch_last_y, 0b000);
|
|
}
|
|
}
|
|
}
|
|
|
|
void handle_keyboard()
|
|
{
|
|
int key = keyboard_get_key();
|
|
if (key > 0)
|
|
{
|
|
// Serial.println(key);
|
|
switch (key)
|
|
{
|
|
case 8:
|
|
key = 0xff08; // BackSpace
|
|
break;
|
|
case 9:
|
|
key = 0xff09; // Tab
|
|
break;
|
|
case 13:
|
|
key = 0xff0d; // Return or Enter
|
|
break;
|
|
case 27:
|
|
key = 0xff1b; // Escape
|
|
break;
|
|
case 180:
|
|
key = 0xff51; // Left
|
|
break;
|
|
case 181:
|
|
key = 0xff52; // Up
|
|
break;
|
|
case 182:
|
|
key = 0xff54; // Down
|
|
break;
|
|
case 183:
|
|
key = 0xff53; // Right
|
|
break;
|
|
}
|
|
vnc.keyEvent(key, 0b001);
|
|
vnc.keyEvent(key, 0b000);
|
|
}
|
|
}
|
|
|
|
void setup(void)
|
|
{
|
|
Serial.begin(115200);
|
|
// Serial.setDebugOutput(true);
|
|
// while(!Serial);
|
|
Serial.println("Arduino_GFX VNC example");
|
|
|
|
#ifdef GFX_EXTRA_PRE_INIT
|
|
GFX_EXTRA_PRE_INIT();
|
|
#endif
|
|
|
|
// Init keyboard device
|
|
keyboard_init();
|
|
|
|
Serial.println("Init display");
|
|
if (!gfx->begin())
|
|
{
|
|
Serial.println("gfx->begin() failed!");
|
|
}
|
|
gfx->fillScreen(BLACK);
|
|
|
|
#ifdef GFX_BL
|
|
pinMode(GFX_BL, OUTPUT);
|
|
digitalWrite(GFX_BL, HIGH);
|
|
#endif
|
|
|
|
// Init touch device
|
|
touch_init(gfx->width(), gfx->height(), gfx->getRotation());
|
|
|
|
TFTnoWifi();
|
|
|
|
Serial.println("Init WiFi");
|
|
gfx->println("Init WiFi");
|
|
#if defined(ESP32)
|
|
WiFi.mode(WIFI_STA);
|
|
WiFi.begin(SSID_NAME, SSID_PASSWORD);
|
|
#elif defined(ESP8266)
|
|
// disable sleep mode for better data rate
|
|
WiFi.setSleepMode(WIFI_NONE_SLEEP);
|
|
WiFi.mode(WIFI_STA);
|
|
WiFi.begin(SSID_NAME, SSID_PASSWORD);
|
|
#elif defined(ARDUINO_RASPBERRY_PI_PICO_W)
|
|
WiFi.mode(WIFI_STA);
|
|
WiFi.begin(SSID_NAME, SSID_PASSWORD);
|
|
#elif defined(RTL8722DM)
|
|
WiFi.begin((char *)SSID_NAME, (char *)SSID_PASSWORD);
|
|
#endif
|
|
while (WiFi.status() != WL_CONNECTED)
|
|
{
|
|
delay(500);
|
|
Serial.print(".");
|
|
gfx->print(".");
|
|
}
|
|
Serial.println(" CONNECTED");
|
|
gfx->println(" CONNECTED");
|
|
Serial.println("IP address: ");
|
|
gfx->println("IP address: ");
|
|
Serial.println(WiFi.localIP());
|
|
gfx->println(WiFi.localIP());
|
|
TFTnoVNC();
|
|
|
|
Serial.println(F("[SETUP] VNC..."));
|
|
|
|
#ifdef SEPARATE_DRAW_TASK
|
|
draw_task_setup();
|
|
#endif
|
|
|
|
vnc.begin(VNC_IP, VNC_PORT);
|
|
vnc.setPassword(VNC_PASSWORD); // optional
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
if (WiFi.status() != WL_CONNECTED)
|
|
{
|
|
vnc.reconnect();
|
|
TFTnoWifi();
|
|
delay(100);
|
|
}
|
|
else
|
|
{
|
|
if (vnc.connected())
|
|
{
|
|
handle_touch();
|
|
handle_keyboard();
|
|
}
|
|
vnc.loop();
|
|
if (!vnc.connected())
|
|
{
|
|
TFTnoVNC();
|
|
// some delay to not flood the server
|
|
delay(5000);
|
|
}
|
|
}
|
|
}
|