#!/bin/sh # # Config script for UnrealIRCd # (C) 2001-2021 The UnrealIRCd Team # # This configure script is free software; the UnrealIRCd Team gives # unlimited permission to copy, distribute and modify as long as the # copyright headers stay intact # # # Rewritten completely to be an interface to autoconf by codemastr # This was inspired by the config by Michael Graff (explorer@flame.org) # but was written from scratch # In order to be faster than the old Config, this assumes that all information # in the cache file is valid and therefore doesn't check it, so if you messed with # default values thats your problem :P # some bits edited by baafie on March 17 2004, every change marked. # Remove trailing slash in paths (if any) FIX_PATHNAMES () { BASEPATH="${BASEPATH%/}" BINDIR="${BINDIR%/}" DATADIR="${DATADIR%/}" CONFDIR="${CONFDIR%/}" MODULESDIR="${MODULESDIR%/}" LOGDIR="${LOGDIR%/}" CACHEDIR="${CACHEDIR%/}" DOCDIR="${DOCDIR%/}" TMPDIR="${TMPDIR%/}" PRIVATELIBDIR="${PRIVATELIBDIR%/}" SSLDIR="${SSLDIR%/}" CURLDIR="${CURLDIR%/}" } # Create and run the ./configure command with the appropriate # options based on the users settings. RUN_CONFIGURE () { ARG=" " if [ -z "$BINDIR" -o -z "$DATADIR" -o -z "$CONFDIR" -o -z "$MODULESDIR" -o -z "$LOGDIR" -o -z "$CACHEDIR" -o -z "$DOCDIR" -o -z "$TMPDIR" -o -z "$PRIVATELIBDIR" ]; then echo "Sorry './Config -quick' cannot be used because your 'config.settings'" echo "file either does not exist or is from an old UnrealIRCd version" echo "(older than UnrealIRCd 5.0.0)." echo "" echo "Please run './Config' without -quick and answer all questions." echo "" exit fi mkdir -p $TMPDIR mkdir -p $PRIVATELIBDIR # Do this even if we're not in advanced mode if [ "$ADVANCED" = "1" ] ; then if [ "$NOOPEROVERRIDE" = "1" ] ; then ARG="$ARG--with-no-operoverride " fi if [ "$OPEROVERRIDEVERIFY" = "1" ] ; then ARG="$ARG--with-operoverride-verify " fi fi if test x"$SSLDIR" = "x" ; then ARG="$ARG--enable-ssl " else ARG="$ARG--enable-ssl=$SSLDIR " fi # Ensure we install curl even if someone does ./Config -quick... if [ "x$CURLDIR" = "x$UNREALCWD/extras/curl" ]; then INSTALLCURL=1 else # And that the path does not refer to eg an old unrealircd-1.2.3 either ;) if echo "$CURLDIR"|egrep -qi extras.*curl; then echo "WARNING: Potentially old cURL directory encountered ($CURLDIR)." echo "I am changing the cURL directory to $UNREALCWD/extras/curl and forcing a rebuild of cURL." CURLDIR="$UNREALCWD/extras/curl" INSTALLCURL=1 fi fi if [ "$REMOTEINC" = "1" ] ; then ARG="$ARG--enable-libcurl=$CURLDIR " fi if [ "$MAXCONNECTIONS_REQUEST" != "auto" ]; then ARG="$ARG--with-maxconnections=$MAXCONNECTIONS_REQUEST " fi ARG="$ARG--with-bindir=$BINDIR " ARG="$ARG--with-datadir=$DATADIR " ARG="$ARG--with-pidfile=$DATADIR/unrealircd.pid " ARG="$ARG--with-controlfile=$DATADIR/unrealircd.ctl " ARG="$ARG--with-confdir=$CONFDIR " ARG="$ARG--with-modulesdir=$MODULESDIR " ARG="$ARG--with-logdir=$LOGDIR " ARG="$ARG--with-cachedir=$CACHEDIR " ARG="$ARG--with-docdir=$DOCDIR " ARG="$ARG--with-tmpdir=$TMPDIR " ARG="$ARG--with-privatelibdir=$PRIVATELIBDIR " ARG="$ARG--with-scriptdir=$BASEPATH " ARG="$ARG--with-nick-history=$NICKNAMEHISTORYLENGTH " ARG="$ARG--with-permissions=$DEFPERM " ARG="$ARG--enable-dynamic-linking " if [ "$GEOIP" = "classic" ]; then ARG="$ARG--enable-geoip-classic " fi if [ "$GEOIP" = "libmaxminddb" ]; then ARG="$ARG--enable-libmaxminddb " fi if [ "$SANITIZER" = "asan" ]; then ARG="$ARG--enable-asan " fi ARG="$ARG $EXTRAPARA " CONF="./configure $ARG" # remove possibly old instances of curl in ~/unrealircd/lib/ rm -f $PRIVATELIBDIR/*curl* 1>/dev/null 2>&1 if [ "x$INSTALLCURL" = "x1" ]; then extras/curlinstall "$PRIVATELIBDIR" || exit 1 fi # At least do SOME parallel compiling by default, IF: # - the MAKE environment variable is not set # - the MAKEFLAGS environment variable is not set # - we are using GNU Make if [ "x$MAKE" = "x" ]; then if [ "x$MAKEFLAGS" = "x" ]; then if make --version 2>&1|grep -q "GNU Make"; then LOWMEM=0 if [ -f /proc/meminfo ]; then FREEKB="`cat /proc/meminfo |grep MemAvailable|awk '{ print $2 }'`" if [ "$FREEKB" != "" -a "$FREEKB" -lt 768000 ]; then LOWMEM=1 fi fi if [ "$LOWMEM" = 0 ]; then echo "Running with 4 concurrent build processes by default (make -j4)." export MAKE='make -j4' else echo "System detected with less than 750MB available memory, not forcing parallel build." fi fi fi fi echo $CONF $CONF || exit 1 cd "$UNREALCWD" if [ "$QUICK" != "1" ] ; then if [ ! -f $CONFDIR/tls/server.cert.pem -a ! -f $CONFDIR/ssl/server.cert.pem ]; then export OPENSSLPATH TEST="" while [ -z "$TEST" ] ; do if [ "$GENCERTIFICATE" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "UnrealIRCd requires a TLS certificate in order to work." echo "Do you want to generate a TLS certificate for the IRCd?" echo "Only answer No if you already have one." echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) GENCERTIFICATE="1" ;; [Nn]*) GENCERTIFICATE="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esac done if [ "$GENCERTIFICATE" = 1 ]; then echo echo "*******************************************************************************" echo "Next you will be asked some questions in order to generate the TLS certificate." echo "IMPORTANT: If you don't own a domain or don't know what to answer, then you can" echo " simply press ENTER or use fictional names for each question!" echo "*******************************************************************************" echo "Press ENTER to continue" read cc $MAKE pem echo "Certificate created successfully." sleep 1 else echo "Ok, not generating TLS certificate. Make sure that the certificate and key" echo "are installed in conf/tls/server.cert.pem and conf/tls/server.key.pem prior to starting the IRCd." fi else echo "TLS certificate already exists in configuration directory, no need to regenerate." fi fi # Silently force a 'make clean' as otherwise part (or whole) of the # compiled source could be using different settings than the user # just requested when re-running ./Config. $MAKE clean 1>/dev/null 2>&1 } RUN_ADVANCED () { TEST="" while [ -z "$TEST" ] ; do if [ "$NOOPEROVERRIDE" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to disable oper override?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) NOOPEROVERRIDE="1" ;; [Nn]*) NOOPEROVERRIDE="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esac done TEST="" while [ -z "$TEST" ] ; do if [ "$OPEROVERRIDEVERIFY" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to require opers to /invite themselves into a +s or +p channel?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) OPEROVERRIDEVERIFY="1" ;; [Nn]*) OPEROVERRIDEVERIFY="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esac done } c="" n="" UNREALCWD="`pwd`" BASEPATH="$HOME/unrealircd" DEFPERM="0600" SSLDIR="" NICKNAMEHISTORYLENGTH="100" MAXCONNECTIONS_REQUEST="auto" REMOTEINC="1" CURLDIR="" NOOPEROVERRIDE="" OPEROVERRIDEVERIFY="" GENCERTIFICATE="1" EXTRAPARA="" SANITIZER="" GEOIP="classic" if [ "`eval echo -n 'a'`" = "-n a" ] ; then c="\c" else n="-n" fi #parse arguments IMPORTEDSETTINGS="" NOINTRO="" QUICK="" ADVANCED="" while [ $# -ge 1 ] ; do if [ $1 = "--help" ] ; then echo "Config utility for UnrealIRCd" echo "-----------------------------" echo "Syntax: ./Config [options]" echo "-nointro Skip intro (release notes, etc)" echo "-quick Skip questions, go straight to configure" echo "-advanced Include additional advanced questions" exit 0 elif [ $1 = "-nointro" ] ; then NOINTRO="1" elif [ $1 = "-quick" -o $1 = "-q" ] ; then QUICK="1" echo "running quick config" if [ -f "config.settings" ] ; then . ./config.settings fi FIX_PATHNAMES RUN_CONFIGURE cd "$UNREALCWD" exit 0 elif [ $1 = "-advanced" ] ; then PREADVANCED="1" fi shift 1 done if [ "$PREADVANCED" = "1" ] ; then ADVANCED="1" elif [ "$ADVANCED" = "1" ]; then ADVANCED="" fi if [ "`id -u`" = "0" ]; then echo "ERROR: You cannot build or run UnrealIRCd as root" echo "" echo "Please create a separate account for building and running UnrealIRCd." echo "See https://www.unrealircd.org/docs/Do_not_run_as_root" exit fi # Check for gmake early... if [ "$MAKE" = "" ]; then MAKE="make" fi if ! $MAKE --version 2>&1|grep -q "GNU Make"; then # So $MAKE is not GNU make, but do we have gmake? if gmake --version 2>&1|grep -q "GNU Make"; then # Great, use that one! MAKE="gmake" else # Both $MAKE and gmake are not GNU make, do we have a working $MAKE at all? if $MAKE --version 1>/dev/null 2>&1; then echo "Your system has 'make' but UnrealIRCd requires GNU Make ('gmake')" echo "Please install 'gmake' (eg 'pkg install gmake' on BSD)." exit 1 else echo "Your system does not have the required tools installed to build UnrealIRCd." echo "Please check https://www.unrealircd.org/docs/Installing_from_source" echo "and install the required tools listed under 'Prerequisites'." echo "After that, you can run ./Config again" exit 1 fi fi fi clear if [ -f "doc/Config.header" -a -z "$NOINTRO" ] ; then cat doc/Config.header echo "" echo $n "[Press Enter to continue]" read cc clear fi echo "We will now ask you a number of questions. You can just press ENTER to accept the defaults!" echo "" # This needs to be updated each release so auto-upgrading works for settings, modules, etc!!: UNREALRELEASES="unrealircd-6.1.0-rc2 unrealircd-6.1.0-rc1 unrealircd-6.0.7 unrealircd-6.0.6 unrealircd-6.0.5 unrealircd-6.0.5-rc2 unrealircd-6.0.5-rc1 unrealircd-6.0.4.2 unrealircd-6.0.4.1 unrealircd-6.0.4 unrealircd-6.0.4-rc2 unrealircd-6.0.4-rc1 unrealircd-6.0.3 unrealircd-6.0.2 unrealircd-6.0.1.1 unrealircd-6.0.1 unrealircd-6.0.0 unrealircd-6.0.0-rc2 unrealircd-6.0.0-rc1 unrealircd-6.0.0-beta4 unrealircd-6.0.0-beta3 unrealircd-6.0.0-beta2 unrealircd-6.0.0-beta1 unrealircd-5.2.3 unrealircd-5.2.2 unrealircd-5.2.1.1 unrealircd-5.2.1 unrealircd-5.2.1-rc1 unrealircd-5.2.0.2 unrealircd-5.2.0.1 unrealircd-5.2.0 unrealircd-5.2.0-rc1 unrealircd-5.0.9.1 unrealircd-5.0.9 unrealircd-5.0.9-rc1 unrealircd-5.0.8 unrealircd-5.0.8-rc1 unrealircd-5.0.7 unrealircd-5.0.7-rc1 unrealircd-5.0.6" if [ -f "config.settings" ]; then . ./config.settings else # Try to load a previous config.settings for x in $UNREALRELEASES do if [ -f ../$x/config.settings ]; then IMPORTEDSETTINGS="../$x" break fi done echo "If you have previously installed UnrealIRCd on this shell then you can specify a" echo "directory here so I can import the build settings and third party modules" echo "to make your life a little easier." if [ ! -z "$IMPORTEDSETTINGS" ]; then echo "Found previous installation in: $IMPORTEDSETTINGS." echo "You can enter a different path or type 'none' if you don't want to use it." echo "Just press Enter to accept the default settings." else echo "If you install UnrealIRCd for the first time on this shell, then just hit Enter"; fi TEST="$IMPORTEDSETTINGS" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ]; then IMPORTEDSETTINGS="$TEST" else IMPORTEDSETTINGS="$cc" fi if [ "$IMPORTEDSETTINGS" = "none" ]; then IMPORTEDSETTINGS="" fi if [ "$IMPORTEDSETTINGS" != "" ]; then if [ -d $IMPORTEDSETTINGS/conf ]; then echo "ERROR: Directory $IMPORTEDSETTINGS is an INSTALLATION directory (eg /home/irc/unrealircd)." echo "This question was about a SOURCE directory (eg /home/irc/unrealircd-5.0.0)." exit fi if [ ! -f $IMPORTEDSETTINGS/config.settings ]; then echo "Directory $IMPORTEDSETTINGS does not exist or does not contain a config.settings file" exit fi COPYMODULES="1" if grep -q TOPICNICKISNUH $IMPORTEDSETTINGS/config.settings; then echo "Directory $IMPORTEDSETTINGS seems to be UnrealIRCd 4.x (or older)." echo "I will copy the settings but not any 3rd party modules, as they are incompatible with 5.x." COPYMODULES="0" fi # Actually load the settings . $IMPORTEDSETTINGS/config.settings if [ "$COPYMODULES" = "1" ]; then # Copy over 3rd party modules (also deals with 0 file cases, hence the silly looking code) for f in $IMPORTEDSETTINGS/src/modules/third/*.c do [ -e "$f" ] && cp $f src/modules/third/ done fi fi fi # If we just imported settings and the curl dir is set to # something like /home/xxx/unrealircd-5.x.y/extras/curl/ # (what we call 'local-curl') then remove this setting as # it would refer to the old UnrealIRCd installation. if [ ! -z "$IMPORTEDSETTINGS" ]; then if echo "$CURLDIR"|grep -qi unrealircd; then CURLDIR="" fi fi TEST="$BASEPATH" echo "" echo "In what directory do you want to install UnrealIRCd?" echo "(Note: UnrealIRCd 6 will need to be installed somewhere." echo " If this directory does not exist it will be created.)" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then BASEPATH=$TEST else BASEPATH=`eval echo $cc` # modified fi if [ "$BASEPATH" = "$UNREALCWD" ]; then echo "" echo "ERROR: The installation directory cannot be the same as the directory" echo " containing the source code ($UNREALCWD)." echo " HINT: Usually the directory containing the source is $HOME/unrealircd-5.x.y" echo " and the installation directory you would need to enter is $HOME/unrealircd" exit 1 fi # TODO: For -advanced we could prompt the user. BINDIR="$BASEPATH/bin" DATADIR="$BASEPATH/data" CONFDIR="$BASEPATH/conf" MODULESDIR="$BASEPATH/modules" LOGDIR="$BASEPATH/logs" CACHEDIR="$BASEPATH/cache" DOCDIR="$BASEPATH/doc" TMPDIR="$BASEPATH/tmp" PRIVATELIBDIR="$BASEPATH/lib" TEST="" while [ -z "$TEST" ] ; do TEST="$DEFPERM" echo "" echo "What should the default permissions for your configuration files be? (Set this to 0 to disable)" echo "It is strongly recommended that you use 0600 to prevent unwanted reading of the file" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then DEFPERM=$TEST break fi case "$cc" in [0-9]*) DEFPERM="$cc" ;; *) echo "" echo "You must enter a number" TEST="" ;; esac done echo "" echo "If you want, you can manually enter the path to OpenSSL/LibreSSL here." echo "In most cases you can leave this blank and it will be detected automatically." if [ -z "$SSLDIR" ]; then uname|grep -q Darwin if [ "$?" = 0 ]; then echo "Looks like you're on a Mac - El Capitan and higher require" echo "a 3rd party OpenSSL installation. We recommend using homebrew" echo "to install OpenSSL, but you may install it any other way as well." echo "We are selecting the default homebrew OpenSSL path - but you can" echo "change it to another path if you have installed OpenSSL another way" SSLDIR="/usr/local/opt/openssl/" fi fi TEST="$SSLDIR" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then SSLDIR="$TEST" else SSLDIR=`eval echo $cc` # modified fi if [ "$SSLDIR" != "" -a "$SSLDIR" != "/usr" ]; then echo "" echo "You answered previous question manually. Just note that if the library is not" echo "in your default library path then UnrealIRCd may fail to start with an error" echo "that it cannot find certain .so files (libraries). In that case you would have" echo "to either set the LD_LIBARY_PATH environment variable, or you could update the" echo "Makefile to link with -Wl,-rpath,$SSLDIR or similar." echo "" if [ "$SSLDIR" = "/usr/local" ]; then echo "**** CAUTION ****" echo "You have chosen to use OpenSSL from /usr/local. Just be aware that if you" echo "use the LD_LIBRARY_PATH or -Wl,-rpath,$SSLDIR from above," echo "that you are diverting OTHER libraries to that path as well." echo "It's not only loading OpenSSL from /usr/local but also potentially other" echo "libraries like PCRE2, Jansson, or any of the other libraries that" echo "UnrealIRCd uses (including dependencies about 40 libs in total!)" echo "All that can result in weird issues and crashes!" echo "" fi echo "Press enter to continue with the rest of the questions, or CTRL+C to abort." read cc fi TEST="" while [ -z "$TEST" ] ; do if [ "$REMOTEINC" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "UnrealIRCd comes with support for 'remote includes', this allows things like:" echo "include \"https://www.example.org/files/opers.conf\";" echo "Do you want to compile with the libcurl library to enable additional protocols?" echo "If you answer 'No' then only https:// links will work for remote includes." echo "Answer 'Yes' if you need other protocols, such as plaintext http, ftp, tftp or smb." echo "Most people answer 'No' here because they don't use remote includes or only need https." echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) REMOTEINC="1" ;; [Nn]*) REMOTEINC="" CURLDIR="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esac done if [ "$REMOTEINC" = "1" ] ; then if [ ! -d "$CURLDIR" ]; then # Reset any previous CURLDIR if it doesn't exist (anymore) CURLDIR="" fi INSTALLCURL="0" SUGGESTCURLDIR="" if [ -d "/usr/local/include/curl" ]; then SUGGESTCURLDIR="/usr/local" fi if [ -d "/usr/include/curl" ]; then SUGGESTCURLDIR="/usr" fi # This one also works for /usr/include/x86_64-linux-gnu and friends: if [ -f "/usr/bin/curl-config" ]; then SUGGESTCURLDIR="/usr" fi GOTASYNC=0 if [ "x$SUGGESTCURLDIR" != "x" ]; then # Check if it's of any use: a curl without async dns (cares) hangs the entire ircd.. # normally this is done in ./configure but now we're forced to do it also here.. if "$SUGGESTCURLDIR"/bin/curl-config --features | grep -q -e AsynchDNS; then GOTASYNC="1" fi if [ "$GOTASYNC" != "1" ]; then SUGGESTCURLDIRBAD="$CURLDIR" SUGGESTCURLDIR="" fi fi if [ "x$CURLDIR" = "x$HOME/curl" ]; then if [ "x$SUGGESTCURLDIR" != "x" ]; then # I guess some people will complain about this, but if system wide cURL is available # and many people have old defaults then this is much preferred: echo "" echo "WARNING: Your previous (potentially old) setting is to use cURL from $HOME/curl." echo "However, your operating system also provides a working cURL." echo "I am therefore changing the setting to: $SUGGESTCURLDIR" CURLDIR="$SUGGESTCURLDIR" else echo "" echo "WARNING: We no longer use $HOME/curl nowadays." echo "Use the automatic download and install feature below." CURLDIR="" fi fi if [ "x$CURLDIR" = "x" ]; then CURLDIR="$SUGGESTCURLDIR" # NOTE: CURLDIR may still be empty after this # System curl has no asyncdns, so install our own. if [ "$GOTASYNC" != "1" ]; then CURLDIR="" fi # Need to output it here, as the HOME check from above may cause this to be no longer relevant. if [ "x$CURLDIR" = "x" -a "x$SUGGESTCURLDIRBAD" != "x" ]; then echo "Curl library was found in $SUGGESTCURLDIRBAD, but it does not support Asynchronous DNS (not compiled with c-ares)" echo "so it's of no use to us as it would stall the IRCd on REHASH." fi fi # Final check if [ "x$CURLDIR" != "x" ]; then "$CURLDIR/bin/curl-config" --features 2>/dev/null | grep -q -e AsynchDNS if [ "$?" != 0 ]; then echo "Curl from $CURLDIR seems unusable ($CURLDIR/bin/curl-config does not exist)" CURLDIR="" fi fi if [ "x$CURLDIR" = "x" ]; then # Still empty? TEST="" while [ -z "$TEST" ] ; do TEST="Yes" echo "" echo "Do you want me to automatically download and install curl for you?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) INSTALLCURL="1" CURLDIR="$UNREALCWD/extras/curl" ;; [Nn]*) INSTALLCURL="0" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esac done fi if [ "$INSTALLCURL" != "1" ]; then TEST="" while [ -z "$TEST" ] ; do TEST="$CURLDIR" echo "" echo "Specify the directory you installed libcurl to" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST else TEST=$cc CURLDIR=`eval echo $cc` # modified fi done if [ "x$CURLDIR" != "x" ]; then "$CURLDIR/bin/curl-config" --libs 1>/dev/null 2>&1 if [ "$?" != 0 ]; then echo "Curl from $CURLDIR seems unusable ($CURLDIR/bin/curl-config does not exist)" CURLDIR="" fi fi fi fi TEST="" while [ -z "$TEST" ] ; do TEST="$NICKNAMEHISTORYLENGTH" echo "" echo "How far back do you want to keep the nickname history?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then NICKNAMEHISTORYLENGTH=$TEST break fi case "$cc" in [1-9]*) NICKNAMEHISTORYLENGTH="$cc" ;; *) echo "" echo "You must enter a number" TEST="" ;; esac done TEST="" while [ -z "$TEST" ] ; do TEST="$GEOIP" echo "" echo "GeoIP is a feature that allows converting an IP address to a location (country)" echo "Possible build options:" echo " classic: This is the DEFAULT geoip engine. It should work on all systems" echo " and receives automatic updates." echo "libmaxminddb: This uses the libmaxminddb library. If you want to use this, then" echo " you need to install the libmaxminddb library on your system first" echo " none: Don't build with any geoip library (geoip-csv is still built)" echo "Choose one of: classic, libmaxminddb, none" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then GEOIP=$TEST break fi case "$cc" in classic) GEOIP="$cc" ;; libmaxminddb) GEOIP="$cc" ;; none) GEOIP="$cc" ;; *) echo "" echo "Invalid choice: $cc" TEST="" ;; esac done echo "" TEST="" while [ -z "$TEST" ] ; do TEST="$MAXCONNECTIONS_REQUEST" echo "" echo "What is the maximum number of sockets (and file descriptors) that" echo "UnrealIRCd may use?" echo "It is recommended to leave this at the default setting 'auto'," echo "which at present results in a limit of up to 16384, depending on" echo "the system. When you boot UnrealIRCd later you will always see" echo "the effective limit." echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then MAXCONNECTIONS_REQUEST=$TEST break fi case "$cc" in auto) MAXCONNECTIONS_REQUEST="$cc" ;; [1-9][0-9][0-9]*) MAXCONNECTIONS_REQUEST="$cc" ;; *) echo "" echo "You must to enter a number greater than or equal to 100." echo "Or enter 'auto' to leave it at automatic, which is recommended." TEST="" ;; esac done if [ -n "$ADVANCED" ] ; then RUN_ADVANCED fi TEST="" while [ -z "$TEST" ] ; do if [ "$SANITIZER" = "asan" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Are you running UnrealIRCd as a test, debugging a problem or developing a module?" echo "Then it is possible to run with AddressSanitizer enabled. This will make it" echo "catch bugs such as out-of-bounds and other memory corruption issues, which can" echo "be really helpful in some cases. The downside is that it will consume a lot" echo "more memory and run slower too. So, only answer 'Yes' if you are OK with this." echo "Also, on some systems (notably FreeBSD), when you enable AddressSanitizer," echo "UnrealIRCd may fail to start. So when in doubt, answer 'No'." echo "Do you want to enable AddressSanitizer?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) SANITIZER="asan" ;; [Nn]*) SANITIZER="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esac done TEST="$EXTRAPARA" echo "" echo "Would you like to pass any custom parameters to configure?" echo "Most people don't need this and can just press ENTER." echo "Otherwise, see \`./configure --help' and write them here:" echo $n "[$TEST] -> $c" read EXTRAPARA if [ -z "$EXTRAPARA" ]; then EXTRAPARA="$TEST" fi FIX_PATHNAMES rm -f config.settings cat > config.settings << __EOF__ # # These are the settings saved from running './Config'. # Note that it is not recommended to edit config.settings by hand! # Chances are you misunderstand what a variable does or what the # supported values are. You better just re-run the ./Config script # and answer appropriately there, to get a correct config.settings # file. # BASEPATH="$BASEPATH" BINDIR="$BINDIR" DATADIR="$DATADIR" CONFDIR="$CONFDIR" MODULESDIR="$MODULESDIR" LOGDIR="$LOGDIR" CACHEDIR="$CACHEDIR" DOCDIR="$DOCDIR" TMPDIR="$TMPDIR" PRIVATELIBDIR="$PRIVATELIBDIR" MAXCONNECTIONS_REQUEST="$MAXCONNECTIONS_REQUEST" NICKNAMEHISTORYLENGTH="$NICKNAMEHISTORYLENGTH" GEOIP="$GEOIP" DEFPERM="$DEFPERM" SSLDIR="$SSLDIR" REMOTEINC="$REMOTEINC" CURLDIR="$CURLDIR" NOOPEROVERRIDE="$NOOPEROVERRIDE" OPEROVERRIDEVERIFY="$OPEROVERRIDEVERIFY" GENCERTIFICATE="$GENCERTIFICATE" SANITIZER="$SANITIZER" EXTRAPARA="$EXTRAPARA" ADVANCED="$ADVANCED" __EOF__ RUN_CONFIGURE cd "$UNREALCWD" cat << __EOF__ _______________________________________________________________________ | | | UnrealIRCd Compile-Time Config | |_______________________________________________________________________| |_______________________________________________________________________| | | | - The UnrealIRCd Team - | | | | Bram Matthys (Syzop) - syzop@unrealircd.org | | Krzysztof Beresztant (k4be) - k4be@unrealircd.org | | Gottem - gottem@unrealircd.org | | i - i@unrealircd.org | |_______________________________________________________________________| |_______________________________________________________________________| | | | Now all you have to do is type '$MAKE' and let it compile. When that's | | done, you will receive other instructions on what to do next. | |_______________________________________________________________________| __EOF__