/* * See LICENSE file for copyright and license details. */ #define _POSIX_C_SOURCE 200809L #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef XWAYLAND #include #include #endif /* macros */ #define BARF(fmt, ...) do { fprintf(stderr, fmt "\n", ##__VA_ARGS__); exit(EXIT_FAILURE); } while (0) #define EBARF(fmt, ...) BARF(fmt ": %s", ##__VA_ARGS__, strerror(errno)) #define MAX(A, B) ((A) > (B) ? (A) : (B)) #define MIN(A, B) ((A) < (B) ? (A) : (B)) #define CLEANMASK(mask) (mask & ~WLR_MODIFIER_CAPS) #define VISIBLEON(C, M) ((C)->mon == (M) && ((C)->tags & (M)->tagset[(M)->seltags])) #define LENGTH(X) (sizeof X / sizeof X[0]) #define END(A) ((A) + LENGTH(A)) #define TAGMASK ((1 << LENGTH(tags)) - 1) #define ROUND(X) ((int)((X)+0.5)) #define LISTEN(E, L, H) wl_signal_add((E), ((L)->notify = (H), (L))) /* enums */ enum { CurNormal, CurMove, CurResize }; /* cursor */ #ifdef XWAYLAND enum { NetWMWindowTypeDialog, NetWMWindowTypeSplash, NetWMWindowTypeToolbar, NetWMWindowTypeUtility, NetLast }; /* EWMH atoms */ enum { XDGShell, X11Managed, X11Unmanaged }; /* client types */ #endif typedef union { int i; unsigned int ui; float f; const void *v; } Arg; typedef struct { unsigned int mod; unsigned int button; void (*func)(const Arg *); const Arg arg; } Button; typedef struct Monitor Monitor; typedef struct { struct wl_list link; struct wl_list flink; struct wl_list slink; union { struct wlr_xdg_surface *xdg; struct wlr_xwayland_surface *xwayland; } surface; struct wl_listener commit; struct wl_listener map; struct wl_listener unmap; struct wl_listener destroy; struct wl_listener fullscreen; struct wlr_box geom; /* layout-relative, includes border */ Monitor *mon; #ifdef XWAYLAND unsigned int type; struct wl_listener activate; struct wl_listener configure; #endif int bw; unsigned int tags; int isfloating; uint32_t resize; /* configure serial of a pending resize */ int prevx; int prevy; int prevwidth; int prevheight; int isfullscreen; } Client; typedef struct { struct wl_listener request_mode; struct wl_listener destroy; } Decoration; typedef struct { uint32_t mod; xkb_keysym_t keysym; void (*func)(const Arg *); const Arg arg; } Key; typedef struct { struct wl_list link; struct wlr_input_device *device; struct wl_listener modifiers; struct wl_listener key; struct wl_listener destroy; } Keyboard; typedef struct { struct wlr_layer_surface_v1 *layer_surface; struct wl_list link; struct wl_listener destroy; struct wl_listener map; struct wl_listener unmap; struct wl_listener surface_commit; struct wlr_box geo; enum zwlr_layer_shell_v1_layer layer; } LayerSurface; typedef struct { uint32_t singular_anchor; uint32_t anchor_triplet; int *positive_axis; int *negative_axis; int margin; } Edge; typedef struct { const char *symbol; void (*arrange)(Monitor *); } Layout; struct Monitor { struct wl_list link; struct wlr_output *wlr_output; struct wl_listener frame; struct wl_listener destroy; struct wlr_box m; /* monitor area, layout-relative */ struct wlr_box w; /* window area, layout-relative */ struct wl_list layers[4]; // LayerSurface::link const Layout *lt[2]; unsigned int seltags; unsigned int sellt; unsigned int tagset[2]; double mfact; int nmaster; Client *fullscreenclient; }; typedef struct { const char *name; float mfact; int nmaster; float scale; const Layout *lt; enum wl_output_transform rr; int x; int y; } MonitorRule; typedef struct { const char *id; const char *title; unsigned int tags; int isfloating; int monitor; } Rule; /* Used to move all of the data necessary to render a surface from the top-level * frame handler to the per-surface render function. */ struct render_data { struct wlr_output *output; struct timespec *when; int x, y; /* layout-relative */ }; /* function declarations */ static void applybounds(Client *c, struct wlr_box *bbox); static void applyexclusive(struct wlr_box *usable_area, uint32_t anchor, int32_t exclusive, int32_t margin_top, int32_t margin_right, int32_t margin_bottom, int32_t margin_left); static void applyrules(Client *c); static void arrange(Monitor *m); static void arrangelayer(Monitor *m, struct wl_list *list, struct wlr_box *usable_area, int exclusive); static void arrangelayers(Monitor *m); static void axisnotify(struct wl_listener *listener, void *data); static void buttonpress(struct wl_listener *listener, void *data); static void chvt(const Arg *arg); static void cleanup(void); static void cleanupkeyboard(struct wl_listener *listener, void *data); static void cleanupmon(struct wl_listener *listener, void *data); static void closemon(Monitor *m); static void commitlayersurfacenotify(struct wl_listener *listener, void *data); static void commitnotify(struct wl_listener *listener, void *data); static void createkeyboard(struct wlr_input_device *device); static void createmon(struct wl_listener *listener, void *data); static void createnotify(struct wl_listener *listener, void *data); static void createlayersurface(struct wl_listener *listener, void *data); static void createpointer(struct wlr_input_device *device); static void createxdeco(struct wl_listener *listener, void *data); static void cursorframe(struct wl_listener *listener, void *data); static void destroylayersurfacenotify(struct wl_listener *listener, void *data); static void destroynotify(struct wl_listener *listener, void *data); static void destroyxdeco(struct wl_listener *listener, void *data); static Monitor *dirtomon(enum wlr_direction dir); static void focusclient(Client *c, int lift); static void focusmon(const Arg *arg); static void focusstack(const Arg *arg); static void fullscreennotify(struct wl_listener *listener, void *data); static Client *focustop(Monitor *m); static void getxdecomode(struct wl_listener *listener, void *data); static void incnmaster(const Arg *arg); static void inputdevice(struct wl_listener *listener, void *data); static int keybinding(uint32_t mods, xkb_keysym_t sym); static void keypress(struct wl_listener *listener, void *data); static void keypressmod(struct wl_listener *listener, void *data); static void killclient(const Arg *arg); static void maplayersurfacenotify(struct wl_listener *listener, void *data); static void mapnotify(struct wl_listener *listener, void *data); static void maximizeclient(Client *c); static void monocle(Monitor *m); static void motionabsolute(struct wl_listener *listener, void *data); static void motionnotify(uint32_t time); static void motionrelative(struct wl_listener *listener, void *data); static void moveresize(const Arg *arg); static void outputmgrapply(struct wl_listener *listener, void *data); static void outputmgrapplyortest(struct wlr_output_configuration_v1 *config, int test); static void outputmgrtest(struct wl_listener *listener, void *data); static void pointerfocus(Client *c, struct wlr_surface *surface, double sx, double sy, uint32_t time); static void quit(const Arg *arg); static void render(struct wlr_surface *surface, int sx, int sy, void *data); static void renderclients(Monitor *m, struct timespec *now); static void renderlayer(struct wl_list *layer_surfaces, struct timespec *now); static void rendermon(struct wl_listener *listener, void *data); static void resize(Client *c, int x, int y, int w, int h, int interact); static void run(char *startup_cmd); static void scalebox(struct wlr_box *box, float scale); static Client *selclient(void); static void setcursor(struct wl_listener *listener, void *data); static void setpsel(struct wl_listener *listener, void *data); static void setsel(struct wl_listener *listener, void *data); static void setfloating(Client *c, int floating); static void setfullscreen(Client *c, int fullscreen); static void setlayout(const Arg *arg); static void setmfact(const Arg *arg); static void setmon(Client *c, Monitor *m, unsigned int newtags); static void setup(void); static void sigchld(int unused); static void spawn(const Arg *arg); static void tag(const Arg *arg); static void tagmon(const Arg *arg); static void tile(Monitor *m); static void togglefloating(const Arg *arg); static void togglefullscreen(const Arg *arg); static void toggletag(const Arg *arg); static void toggleview(const Arg *arg); static void unmaplayersurface(LayerSurface *layersurface); static void unmaplayersurfacenotify(struct wl_listener *listener, void *data); static void unmapnotify(struct wl_listener *listener, void *data); static void updatemons(); static void view(const Arg *arg); static void virtualkeyboard(struct wl_listener *listener, void *data); static Client *xytoclient(double x, double y); static struct wlr_surface *xytolayersurface(struct wl_list *layer_surfaces, double x, double y, double *sx, double *sy); static Monitor *xytomon(double x, double y); static void zoom(const Arg *arg); /* variables */ static const char broken[] = "broken"; static struct wl_display *dpy; static struct wlr_backend *backend; static struct wlr_renderer *drw; static struct wlr_compositor *compositor; static struct wlr_xdg_shell *xdg_shell; static struct wl_list clients; /* tiling order */ static struct wl_list fstack; /* focus order */ static struct wl_list stack; /* stacking z-order */ static struct wl_list independents; static struct wlr_idle *idle; static struct wlr_layer_shell_v1 *layer_shell; static struct wlr_xdg_decoration_manager_v1 *xdeco_mgr; static struct wlr_output_manager_v1 *output_mgr; static struct wlr_virtual_keyboard_manager_v1 *virtual_keyboard_mgr; static struct wlr_cursor *cursor; static struct wlr_xcursor_manager *cursor_mgr; #ifdef XWAYLAND static struct wlr_xcursor *xcursor; static struct wlr_xcursor_manager *xcursor_mgr; #endif static struct wlr_seat *seat; static struct wl_list keyboards; static unsigned int cursor_mode; static Client *grabc; static int grabcx, grabcy; /* client-relative */ static struct wlr_output_layout *output_layout; static struct wlr_box sgeom; static struct wl_list mons; static Monitor *selmon; /* global event handlers */ static struct wl_listener cursor_axis = {.notify = axisnotify}; static struct wl_listener cursor_button = {.notify = buttonpress}; static struct wl_listener cursor_frame = {.notify = cursorframe}; static struct wl_listener cursor_motion = {.notify = motionrelative}; static struct wl_listener cursor_motion_absolute = {.notify = motionabsolute}; static struct wl_listener new_input = {.notify = inputdevice}; static struct wl_listener new_virtual_keyboard = {.notify = virtualkeyboard}; static struct wl_listener new_output = {.notify = createmon}; static struct wl_listener new_xdeco = {.notify = createxdeco}; static struct wl_listener new_xdg_surface = {.notify = createnotify}; static struct wl_listener new_layer_shell_surface = {.notify = createlayersurface}; static struct wl_listener output_mgr_apply = {.notify = outputmgrapply}; static struct wl_listener output_mgr_test = {.notify = outputmgrtest}; static struct wl_listener request_cursor = {.notify = setcursor}; static struct wl_listener request_set_psel = {.notify = setpsel}; static struct wl_listener request_set_sel = {.notify = setsel}; #ifdef XWAYLAND static void activatex11(struct wl_listener *listener, void *data); static void configurex11(struct wl_listener *listener, void *data); static void createnotifyx11(struct wl_listener *listener, void *data); static Atom getatom(xcb_connection_t *xc, const char *name); static void renderindependents(struct wlr_output *output, struct timespec *now); static void xwaylandready(struct wl_listener *listener, void *data); static Client *xytoindependent(double x, double y); static struct wl_listener new_xwayland_surface = {.notify = createnotifyx11}; static struct wl_listener xwayland_ready = {.notify = xwaylandready}; static struct wlr_xwayland *xwayland; static Atom netatom[NetLast]; #endif /* configuration, allows nested code to access above variables */ #include "config.h" /* attempt to encapsulate suck into one file */ #include "client.h" /* compile-time check if all tags fit into an unsigned int bit array. */ struct NumTags { char limitexceeded[LENGTH(tags) > 31 ? -1 : 1]; }; /* function implementations */ void applybounds(Client *c, struct wlr_box *bbox) { /* set minimum possible */ c->geom.width = MAX(1, c->geom.width); c->geom.height = MAX(1, c->geom.height); if (c->geom.x >= bbox->x + bbox->width) c->geom.x = bbox->x + bbox->width - c->geom.width; if (c->geom.y >= bbox->y + bbox->height) c->geom.y = bbox->y + bbox->height - c->geom.height; if (c->geom.x + c->geom.width + 2 * c->bw <= bbox->x) c->geom.x = bbox->x; if (c->geom.y + c->geom.height + 2 * c->bw <= bbox->y) c->geom.y = bbox->y; } void applyexclusive(struct wlr_box *usable_area, uint32_t anchor, int32_t exclusive, int32_t margin_top, int32_t margin_right, int32_t margin_bottom, int32_t margin_left) { Edge edges[] = { { // Top .singular_anchor = ZWLR_LAYER_SURFACE_V1_ANCHOR_TOP, .anchor_triplet = ZWLR_LAYER_SURFACE_V1_ANCHOR_LEFT | ZWLR_LAYER_SURFACE_V1_ANCHOR_RIGHT | ZWLR_LAYER_SURFACE_V1_ANCHOR_TOP, .positive_axis = &usable_area->y, .negative_axis = &usable_area->height, .margin = margin_top, }, { // Bottom .singular_anchor = ZWLR_LAYER_SURFACE_V1_ANCHOR_BOTTOM, .anchor_triplet = ZWLR_LAYER_SURFACE_V1_ANCHOR_LEFT | ZWLR_LAYER_SURFACE_V1_ANCHOR_RIGHT | ZWLR_LAYER_SURFACE_V1_ANCHOR_BOTTOM, .positive_axis = NULL, .negative_axis = &usable_area->height, .margin = margin_bottom, }, { // Left .singular_anchor = ZWLR_LAYER_SURFACE_V1_ANCHOR_LEFT, .anchor_triplet = ZWLR_LAYER_SURFACE_V1_ANCHOR_LEFT | ZWLR_LAYER_SURFACE_V1_ANCHOR_TOP | ZWLR_LAYER_SURFACE_V1_ANCHOR_BOTTOM, .positive_axis = &usable_area->x, .negative_axis = &usable_area->width, .margin = margin_left, }, { // Right .singular_anchor = ZWLR_LAYER_SURFACE_V1_ANCHOR_RIGHT, .anchor_triplet = ZWLR_LAYER_SURFACE_V1_ANCHOR_RIGHT | ZWLR_LAYER_SURFACE_V1_ANCHOR_TOP | ZWLR_LAYER_SURFACE_V1_ANCHOR_BOTTOM, .positive_axis = NULL, .negative_axis = &usable_area->width, .margin = margin_right, } }; for (size_t i = 0; i < LENGTH(edges); ++i) { if ((anchor == edges[i].singular_anchor || anchor == edges[i].anchor_triplet) && exclusive + edges[i].margin > 0) { if (edges[i].positive_axis) *edges[i].positive_axis += exclusive + edges[i].margin; if (edges[i].negative_axis) *edges[i].negative_axis -= exclusive + edges[i].margin; break; } } } void applyrules(Client *c) { /* rule matching */ const char *appid, *title; unsigned int i, newtags = 0; const Rule *r; Monitor *mon = selmon, *m; c->isfloating = client_is_float_type(c); if (!(appid = client_get_appid(c))) appid = broken; if (!(title = client_get_title(c))) title = broken; for (r = rules; r < END(rules); r++) { if ((!r->title || strstr(title, r->title)) && (!r->id || strstr(appid, r->id))) { c->isfloating = r->isfloating; newtags |= r->tags; i = 0; wl_list_for_each(m, &mons, link) if (r->monitor == i++) mon = m; } } setmon(c, mon, newtags); } void arrange(Monitor *m) { if (m->lt[m->sellt]->arrange) m->lt[m->sellt]->arrange(m); else if (m->fullscreenclient) maximizeclient(m->fullscreenclient); /* TODO recheck pointer focus here... or in resize()? */ } void arrangelayer(Monitor *m, struct wl_list *list, struct wlr_box *usable_area, int exclusive) { LayerSurface *layersurface; struct wlr_box full_area = m->m; wl_list_for_each(layersurface, list, link) { struct wlr_layer_surface_v1 *wlr_layer_surface = layersurface->layer_surface; struct wlr_layer_surface_v1_state *state = &wlr_layer_surface->current; struct wlr_box bounds; struct wlr_box box = { .width = state->desired_width, .height = state->desired_height }; const uint32_t both_horiz = ZWLR_LAYER_SURFACE_V1_ANCHOR_LEFT | ZWLR_LAYER_SURFACE_V1_ANCHOR_RIGHT; const uint32_t both_vert = ZWLR_LAYER_SURFACE_V1_ANCHOR_TOP | ZWLR_LAYER_SURFACE_V1_ANCHOR_BOTTOM; if (exclusive != (state->exclusive_zone > 0)) continue; bounds = state->exclusive_zone == -1 ? full_area : *usable_area; // Horizontal axis if ((state->anchor & both_horiz) && box.width == 0) { box.x = bounds.x; box.width = bounds.width; } else if ((state->anchor & ZWLR_LAYER_SURFACE_V1_ANCHOR_LEFT)) { box.x = bounds.x; } else if ((state->anchor & ZWLR_LAYER_SURFACE_V1_ANCHOR_RIGHT)) { box.x = bounds.x + (bounds.width - box.width); } else { box.x = bounds.x + ((bounds.width / 2) - (box.width / 2)); } // Vertical axis if ((state->anchor & both_vert) && box.height == 0) { box.y = bounds.y; box.height = bounds.height; } else if ((state->anchor & ZWLR_LAYER_SURFACE_V1_ANCHOR_TOP)) { box.y = bounds.y; } else if ((state->anchor & ZWLR_LAYER_SURFACE_V1_ANCHOR_BOTTOM)) { box.y = bounds.y + (bounds.height - box.height); } else { box.y = bounds.y + ((bounds.height / 2) - (box.height / 2)); } // Margin if ((state->anchor & both_horiz) == both_horiz) { box.x += state->margin.left; box.width -= state->margin.left + state->margin.right; } else if ((state->anchor & ZWLR_LAYER_SURFACE_V1_ANCHOR_LEFT)) { box.x += state->margin.left; } else if ((state->anchor & ZWLR_LAYER_SURFACE_V1_ANCHOR_RIGHT)) { box.x -= state->margin.right; } if ((state->anchor & both_vert) == both_vert) { box.y += state->margin.top; box.height -= state->margin.top + state->margin.bottom; } else if ((state->anchor & ZWLR_LAYER_SURFACE_V1_ANCHOR_TOP)) { box.y += state->margin.top; } else if ((state->anchor & ZWLR_LAYER_SURFACE_V1_ANCHOR_BOTTOM)) { box.y -= state->margin.bottom; } if (box.width < 0 || box.height < 0) { wlr_layer_surface_v1_close(wlr_layer_surface); continue; } layersurface->geo = box; if (state->exclusive_zone > 0) applyexclusive(usable_area, state->anchor, state->exclusive_zone, state->margin.top, state->margin.right, state->margin.bottom, state->margin.left); wlr_layer_surface_v1_configure(wlr_layer_surface, box.width, box.height); } } void arrangelayers(Monitor *m) { struct wlr_box usable_area = m->m; uint32_t layers_above_shell[] = { ZWLR_LAYER_SHELL_V1_LAYER_OVERLAY, ZWLR_LAYER_SHELL_V1_LAYER_TOP, }; size_t nlayers = LENGTH(layers_above_shell); LayerSurface *layersurface; struct wlr_keyboard *kb = wlr_seat_get_keyboard(seat); // Arrange exclusive surfaces from top->bottom arrangelayer(m, &m->layers[ZWLR_LAYER_SHELL_V1_LAYER_OVERLAY], &usable_area, 1); arrangelayer(m, &m->layers[ZWLR_LAYER_SHELL_V1_LAYER_TOP], &usable_area, 1); arrangelayer(m, &m->layers[ZWLR_LAYER_SHELL_V1_LAYER_BOTTOM], &usable_area, 1); arrangelayer(m, &m->layers[ZWLR_LAYER_SHELL_V1_LAYER_BACKGROUND], &usable_area, 1); if (memcmp(&usable_area, &m->w, sizeof(struct wlr_box))) { m->w = usable_area; arrange(m); } // Arrange non-exlusive surfaces from top->bottom arrangelayer(m, &m->layers[ZWLR_LAYER_SHELL_V1_LAYER_OVERLAY], &usable_area, 0); arrangelayer(m, &m->layers[ZWLR_LAYER_SHELL_V1_LAYER_TOP], &usable_area, 0); arrangelayer(m, &m->layers[ZWLR_LAYER_SHELL_V1_LAYER_BOTTOM], &usable_area, 0); arrangelayer(m, &m->layers[ZWLR_LAYER_SHELL_V1_LAYER_BACKGROUND], &usable_area, 0); // Find topmost keyboard interactive layer, if such a layer exists for (size_t i = 0; i < nlayers; ++i) { wl_list_for_each_reverse(layersurface, &m->layers[layers_above_shell[i]], link) { if (layersurface->layer_surface->current.keyboard_interactive && layersurface->layer_surface->mapped) { // Deactivate the focused client. focusclient(NULL, 0); wlr_seat_keyboard_notify_enter(seat, layersurface->layer_surface->surface, kb->keycodes, kb->num_keycodes, &kb->modifiers); return; } } } } void axisnotify(struct wl_listener *listener, void *data) { /* This event is forwarded by the cursor when a pointer emits an axis event, * for example when you move the scroll wheel. */ struct wlr_event_pointer_axis *event = data; wlr_idle_notify_activity(idle, seat); /* Notify the client with pointer focus of the axis event. */ wlr_seat_pointer_notify_axis(seat, event->time_msec, event->orientation, event->delta, event->delta_discrete, event->source); } void buttonpress(struct wl_listener *listener, void *data) { struct wlr_event_pointer_button *event = data; struct wlr_keyboard *keyboard; uint32_t mods; Client *c; const Button *b; wlr_idle_notify_activity(idle, seat); switch (event->state) { case WLR_BUTTON_PRESSED:; /* Change focus if the button was _pressed_ over a client */ if ((c = xytoclient(cursor->x, cursor->y))) focusclient(c, 1); keyboard = wlr_seat_get_keyboard(seat); mods = wlr_keyboard_get_modifiers(keyboard); for (b = buttons; b < END(buttons); b++) { if (CLEANMASK(mods) == CLEANMASK(b->mod) && event->button == b->button && b->func) { b->func(&b->arg); return; } } break; case WLR_BUTTON_RELEASED: /* If you released any buttons, we exit interactive move/resize mode. */ /* TODO should reset to the pointer focus's current setcursor */ if (cursor_mode != CurNormal) { wlr_xcursor_manager_set_cursor_image(cursor_mgr, "left_ptr", cursor); cursor_mode = CurNormal; /* Drop the window off on its new monitor */ selmon = xytomon(cursor->x, cursor->y); setmon(grabc, selmon, 0); return; } break; } /* If the event wasn't handled by the compositor, notify the client with * pointer focus that a button press has occurred */ wlr_seat_pointer_notify_button(seat, event->time_msec, event->button, event->state); } void chvt(const Arg *arg) { wlr_session_change_vt(wlr_backend_get_session(backend), arg->ui); } void cleanup(void) { #ifdef XWAYLAND wlr_xwayland_destroy(xwayland); #endif wl_display_destroy_clients(dpy); wlr_backend_destroy(backend); wlr_xcursor_manager_destroy(cursor_mgr); wlr_cursor_destroy(cursor); wlr_output_layout_destroy(output_layout); wlr_seat_destroy(seat); wl_display_destroy(dpy); } void cleanupkeyboard(struct wl_listener *listener, void *data) { struct wlr_input_device *device = data; Keyboard *kb = device->data; wl_list_remove(&kb->link); wl_list_remove(&kb->modifiers.link); wl_list_remove(&kb->key.link); wl_list_remove(&kb->destroy.link); free(kb); } void cleanupmon(struct wl_listener *listener, void *data) { struct wlr_output *wlr_output = data; Monitor *m = wlr_output->data; int nmons, i = 0; wl_list_remove(&m->destroy.link); wl_list_remove(&m->frame.link); wl_list_remove(&m->link); wlr_output_layout_remove(output_layout, m->wlr_output); updatemons(); nmons = wl_list_length(&mons); do // don't switch to disabled mons selmon = wl_container_of(mons.prev, selmon, link); while (!selmon->wlr_output->enabled && i++ < nmons); focusclient(focustop(selmon), 1); closemon(m); free(m); } void closemon(Monitor *m) { // move closed monitor's clients to the focused one Client *c; wl_list_for_each(c, &clients, link) { if (c->isfloating && c->geom.x > m->m.width) resize(c, c->geom.x - m->w.width, c->geom.y, c->geom.width, c->geom.height, 0); if (c->mon == m) setmon(c, selmon, c->tags); } } void commitlayersurfacenotify(struct wl_listener *listener, void *data) { LayerSurface *layersurface = wl_container_of(listener, layersurface, surface_commit); struct wlr_layer_surface_v1 *wlr_layer_surface = layersurface->layer_surface; struct wlr_output *wlr_output = wlr_layer_surface->output; Monitor *m; if (!wlr_output) return; m = wlr_output->data; arrangelayers(m); if (layersurface->layer != wlr_layer_surface->current.layer) { wl_list_remove(&layersurface->link); wl_list_insert(&m->layers[wlr_layer_surface->current.layer], &layersurface->link); layersurface->layer = wlr_layer_surface->current.layer; } } void commitnotify(struct wl_listener *listener, void *data) { Client *c = wl_container_of(listener, c, commit); /* mark a pending resize as completed */ if (c->resize && c->resize <= c->surface.xdg->configure_serial) c->resize = 0; } void createkeyboard(struct wlr_input_device *device) { struct xkb_context *context; struct xkb_keymap *keymap; Keyboard *kb = device->data = calloc(1, sizeof(*kb)); kb->device = device; /* Prepare an XKB keymap and assign it to the keyboard. */ context = xkb_context_new(XKB_CONTEXT_NO_FLAGS); keymap = xkb_map_new_from_names(context, &xkb_rules, XKB_KEYMAP_COMPILE_NO_FLAGS); wlr_keyboard_set_keymap(device->keyboard, keymap); xkb_keymap_unref(keymap); xkb_context_unref(context); wlr_keyboard_set_repeat_info(device->keyboard, repeat_rate, repeat_delay); /* Here we set up listeners for keyboard events. */ LISTEN(&device->keyboard->events.modifiers, &kb->modifiers, keypressmod); LISTEN(&device->keyboard->events.key, &kb->key, keypress); LISTEN(&device->events.destroy, &kb->destroy, cleanupkeyboard); wlr_seat_set_keyboard(seat, device); /* And add the keyboard to our list of keyboards */ wl_list_insert(&keyboards, &kb->link); } void createmon(struct wl_listener *listener, void *data) { /* This event is raised by the backend when a new output (aka a display or * monitor) becomes available. */ struct wlr_output *wlr_output = data; const MonitorRule *r; size_t nlayers; Monitor *m, *moni, *insertmon = NULL; /* The mode is a tuple of (width, height, refresh rate), and each * monitor supports only a specific set of modes. We just pick the * monitor's preferred mode; a more sophisticated compositor would let * the user configure it. */ wlr_output_set_mode(wlr_output, wlr_output_preferred_mode(wlr_output)); /* Allocates and configures monitor state using configured rules */ m = wlr_output->data = calloc(1, sizeof(*m)); m->wlr_output = wlr_output; m->tagset[0] = m->tagset[1] = 1; for (r = monrules; r < END(monrules); r++) { if (!r->name || strstr(wlr_output->name, r->name)) { m->mfact = r->mfact; m->nmaster = r->nmaster; wlr_output_set_scale(wlr_output, r->scale); wlr_xcursor_manager_load(cursor_mgr, r->scale); m->lt[0] = m->lt[1] = r->lt; wlr_output_set_transform(wlr_output, r->rr); break; } } wlr_output_enable_adaptive_sync(wlr_output, 1); /* Set up event listeners */ LISTEN(&wlr_output->events.frame, &m->frame, rendermon); LISTEN(&wlr_output->events.destroy, &m->destroy, cleanupmon); wl_list_insert(&mons, &m->link); wlr_output_enable(wlr_output, 1); if (!wlr_output_commit(wlr_output)) return; /* Adds this to the output layout in the order it was configured in. * * The output layout utility automatically adds a wl_output global to the * display, which Wayland clients can see to find out information about the * output (such as DPI, scale factor, manufacturer, etc). */ wlr_output_layout_add(output_layout, wlr_output, r->x, r->y); sgeom = *wlr_output_layout_get_box(output_layout, NULL); nlayers = LENGTH(m->layers); for (size_t i = 0; i < nlayers; ++i) wl_list_init(&m->layers[i]); /* When adding monitors, the geometries of all monitors must be updated */ updatemons(); wl_list_for_each(m, &mons, link) { /* The first monitor in the list is the most recently added */ Client *c; wl_list_for_each(c, &clients, link) { if (c->isfloating) resize(c, c->geom.x + m->w.width, c->geom.y, c->geom.width, c->geom.height, 0); } return; } } void createnotify(struct wl_listener *listener, void *data) { /* This event is raised when wlr_xdg_shell receives a new xdg surface from a * client, either a toplevel (application window) or popup. */ struct wlr_xdg_surface *xdg_surface = data; Client *c; if (xdg_surface->role != WLR_XDG_SURFACE_ROLE_TOPLEVEL) return; wl_list_for_each(c, &clients, link) if (c->isfullscreen && VISIBLEON(c, c->mon)) setfullscreen(c, 0); /* Allocate a Client for this surface */ c = xdg_surface->data = calloc(1, sizeof(*c)); c->surface.xdg = xdg_surface; c->bw = borderpx; /* Tell the client not to try anything fancy */ wlr_xdg_toplevel_set_tiled(c->surface.xdg, WLR_EDGE_TOP | WLR_EDGE_BOTTOM | WLR_EDGE_LEFT | WLR_EDGE_RIGHT); LISTEN(&xdg_surface->surface->events.commit, &c->commit, commitnotify); LISTEN(&xdg_surface->events.map, &c->map, mapnotify); LISTEN(&xdg_surface->events.unmap, &c->unmap, unmapnotify); LISTEN(&xdg_surface->events.destroy, &c->destroy, destroynotify); LISTEN(&xdg_surface->toplevel->events.request_fullscreen, &c->fullscreen, fullscreennotify); c->isfullscreen = 0; } void createlayersurface(struct wl_listener *listener, void *data) { struct wlr_layer_surface_v1 *wlr_layer_surface = data; LayerSurface *layersurface; Monitor *m; struct wlr_layer_surface_v1_state old_state; if (!wlr_layer_surface->output) { wlr_layer_surface->output = selmon->wlr_output; } layersurface = calloc(1, sizeof(LayerSurface)); LISTEN(&wlr_layer_surface->surface->events.commit, &layersurface->surface_commit, commitlayersurfacenotify); LISTEN(&wlr_layer_surface->events.destroy, &layersurface->destroy, destroylayersurfacenotify); LISTEN(&wlr_layer_surface->events.map, &layersurface->map, maplayersurfacenotify); LISTEN(&wlr_layer_surface->events.unmap, &layersurface->unmap, unmaplayersurfacenotify); layersurface->layer_surface = wlr_layer_surface; wlr_layer_surface->data = layersurface; m = wlr_layer_surface->output->data; wl_list_insert(&m->layers[wlr_layer_surface->client_pending.layer], &layersurface->link); // Temporarily set the layer's current state to client_pending // so that we can easily arrange it old_state = wlr_layer_surface->current; wlr_layer_surface->current = wlr_layer_surface->client_pending; arrangelayers(m); wlr_layer_surface->current = old_state; } void createpointer(struct wlr_input_device *device) { if (wlr_input_device_is_libinput(device)) { struct libinput_device *libinput_device = (struct libinput_device*) wlr_libinput_get_device_handle(device); if (tap_to_click && libinput_device_config_tap_get_finger_count(libinput_device)) libinput_device_config_tap_set_enabled(libinput_device, LIBINPUT_CONFIG_TAP_ENABLED); if (libinput_device_config_scroll_has_natural_scroll(libinput_device)) libinput_device_config_scroll_set_natural_scroll_enabled(libinput_device, natural_scrolling); } /* We don't do anything special with pointers. All of our pointer handling * is proxied through wlr_cursor. On another compositor, you might take this * opportunity to do libinput configuration on the device to set * acceleration, etc. */ wlr_cursor_attach_input_device(cursor, device); } void createxdeco(struct wl_listener *listener, void *data) { struct wlr_xdg_toplevel_decoration_v1 *wlr_deco = data; Decoration *d = wlr_deco->data = calloc(1, sizeof(*d)); LISTEN(&wlr_deco->events.request_mode, &d->request_mode, getxdecomode); LISTEN(&wlr_deco->events.destroy, &d->destroy, destroyxdeco); getxdecomode(&d->request_mode, wlr_deco); } void cursorframe(struct wl_listener *listener, void *data) { /* This event is forwarded by the cursor when a pointer emits an frame * event. Frame events are sent after regular pointer events to group * multiple events together. For instance, two axis events may happen at the * same time, in which case a frame event won't be sent in between. */ /* Notify the client with pointer focus of the frame event. */ wlr_seat_pointer_notify_frame(seat); } void destroylayersurfacenotify(struct wl_listener *listener, void *data) { LayerSurface *layersurface = wl_container_of(listener, layersurface, destroy); if (layersurface->layer_surface->mapped) unmaplayersurface(layersurface); wl_list_remove(&layersurface->link); wl_list_remove(&layersurface->destroy.link); wl_list_remove(&layersurface->map.link); wl_list_remove(&layersurface->unmap.link); wl_list_remove(&layersurface->surface_commit.link); if (layersurface->layer_surface->output) { Monitor *m = layersurface->layer_surface->output->data; if (m) arrangelayers(m); layersurface->layer_surface->output = NULL; } free(layersurface); } void destroynotify(struct wl_listener *listener, void *data) { /* Called when the surface is destroyed and should never be shown again. */ Client *c = wl_container_of(listener, c, destroy); wl_list_remove(&c->map.link); wl_list_remove(&c->unmap.link); wl_list_remove(&c->destroy.link); wl_list_remove(&c->fullscreen.link); #ifdef XWAYLAND if (c->type == X11Managed) wl_list_remove(&c->activate.link); else if (c->type == XDGShell) #endif wl_list_remove(&c->commit.link); free(c); } void destroyxdeco(struct wl_listener *listener, void *data) { struct wlr_xdg_toplevel_decoration_v1 *wlr_deco = data; Decoration *d = wlr_deco->data; wl_list_remove(&d->destroy.link); wl_list_remove(&d->request_mode.link); free(d); } void togglefullscreen(const Arg *arg) { Client *sel = selclient(); setfullscreen(sel, !sel->isfullscreen); } void maximizeclient(Client *c) { resize(c, c->mon->m.x, c->mon->m.y, c->mon->m.width, c->mon->m.height, 0); /* used for fullscreen clients */ } void setfullscreen(Client *c, int fullscreen) { c->isfullscreen = fullscreen; c->bw = (1 - fullscreen) * borderpx; client_set_fullscreen(c, fullscreen); if (fullscreen) { c->prevx = c->geom.x; c->prevy = c->geom.y; c->prevheight = c->geom.height; c->prevwidth = c->geom.width; c->mon->fullscreenclient = c; maximizeclient(c); } else { /* restore previous size instead of arrange for floating windows since * client positions are set by the user and cannot be recalculated */ resize(c, c->prevx, c->prevy, c->prevwidth, c->prevheight, 0); c->mon->fullscreenclient = NULL; arrange(c->mon); } } void fullscreennotify(struct wl_listener *listener, void *data) { Client *c = wl_container_of(listener, c, fullscreen); setfullscreen(c, !c->isfullscreen); } Monitor * dirtomon(enum wlr_direction dir) { struct wlr_output *next; if ((next = wlr_output_layout_adjacent_output(output_layout, dir, selmon->wlr_output, selmon->m.x, selmon->m.y))) return next->data; if ((next = wlr_output_layout_farthest_output(output_layout, dir ^ (WLR_DIRECTION_LEFT|WLR_DIRECTION_RIGHT), selmon->wlr_output, selmon->m.x, selmon->m.y))) return next->data; return selmon; } void focusclient(Client *c, int lift) { struct wlr_surface *old = seat->keyboard_state.focused_surface; struct wlr_keyboard *kb; /* Raise client in stacking order if requested */ if (c && lift) { wl_list_remove(&c->slink); wl_list_insert(&stack, &c->slink); } if (c && client_surface(c) == old) return; /* Put the new client atop the focus stack and select its monitor */ if (c) { wl_list_remove(&c->flink); wl_list_insert(&fstack, &c->flink); selmon = c->mon; } /* Deactivate old client if focus is changing */ if (old && (!c || client_surface(c) != old)) { /* If an overlay is focused, don't focus or activate the client, * but only update its position in fstack to render its border with focuscolor * and focus it after the overlay is closed. * It's probably pointless to check if old is a layer surface * since it can't be anything else at this point. */ if (wlr_surface_is_layer_surface(old)) { struct wlr_layer_surface_v1 *wlr_layer_surface = wlr_layer_surface_v1_from_wlr_surface(old); if (wlr_layer_surface->mapped && ( wlr_layer_surface->current.layer == ZWLR_LAYER_SHELL_V1_LAYER_TOP || wlr_layer_surface->current.layer == ZWLR_LAYER_SHELL_V1_LAYER_OVERLAY )) return; } else { client_activate_surface(old, 0); } } if (!c) { /* With no client, all we have left is to clear focus */ wlr_seat_keyboard_notify_clear_focus(seat); return; } /* Have a client, so focus its top-level wlr_surface */ kb = wlr_seat_get_keyboard(seat); wlr_seat_keyboard_notify_enter(seat, client_surface(c), kb->keycodes, kb->num_keycodes, &kb->modifiers); /* Activate the new client */ client_activate_surface(client_surface(c), 1); } void focusmon(const Arg *arg) { do selmon = dirtomon(arg->i); while (!selmon->wlr_output->enabled); focusclient(focustop(selmon), 1); } void focusstack(const Arg *arg) { /* Focus the next or previous client (in tiling order) on selmon */ Client *c, *sel = selclient(); if (!sel) return; if (arg->i > 0) { wl_list_for_each(c, &sel->link, link) { if (&c->link == &clients) continue; /* wrap past the sentinel node */ if (VISIBLEON(c, selmon)) break; /* found it */ } } else { wl_list_for_each_reverse(c, &sel->link, link) { if (&c->link == &clients) continue; /* wrap past the sentinel node */ if (VISIBLEON(c, selmon)) break; /* found it */ } } /* If only one client is visible on selmon, then c == sel */ focusclient(c, 1); } Client * focustop(Monitor *m) { Client *c; wl_list_for_each(c, &fstack, flink) if (VISIBLEON(c, m)) return c; return NULL; } void getxdecomode(struct wl_listener *listener, void *data) { struct wlr_xdg_toplevel_decoration_v1 *wlr_deco = data; wlr_xdg_toplevel_decoration_v1_set_mode(wlr_deco, WLR_XDG_TOPLEVEL_DECORATION_V1_MODE_SERVER_SIDE); } void incnmaster(const Arg *arg) { selmon->nmaster = MAX(selmon->nmaster + arg->i, 0); arrange(selmon); } void inputdevice(struct wl_listener *listener, void *data) { /* This event is raised by the backend when a new input device becomes * available. */ struct wlr_input_device *device = data; uint32_t caps; switch (device->type) { case WLR_INPUT_DEVICE_KEYBOARD: createkeyboard(device); break; case WLR_INPUT_DEVICE_POINTER: createpointer(device); break; default: /* TODO handle other input device types */ break; } /* We need to let the wlr_seat know what our capabilities are, which is * communiciated to the client. In dwl we always have a cursor, even if * there are no pointer devices, so we always include that capability. */ /* TODO do we actually require a cursor? */ caps = WL_SEAT_CAPABILITY_POINTER; if (!wl_list_empty(&keyboards)) caps |= WL_SEAT_CAPABILITY_KEYBOARD; wlr_seat_set_capabilities(seat, caps); } int keybinding(uint32_t mods, xkb_keysym_t sym) { /* * Here we handle compositor keybindings. This is when the compositor is * processing keys, rather than passing them on to the client for its own * processing. */ int handled = 0; const Key *k; for (k = keys; k < END(keys); k++) { if (CLEANMASK(mods) == CLEANMASK(k->mod) && sym == k->keysym && k->func) { k->func(&k->arg); handled = 1; } } return handled; } void keypress(struct wl_listener *listener, void *data) { int i; /* This event is raised when a key is pressed or released. */ Keyboard *kb = wl_container_of(listener, kb, key); struct wlr_event_keyboard_key *event = data; /* Translate libinput keycode -> xkbcommon */ uint32_t keycode = event->keycode + 8; /* Get a list of keysyms based on the keymap for this keyboard */ const xkb_keysym_t *syms; int nsyms = xkb_state_key_get_syms( kb->device->keyboard->xkb_state, keycode, &syms); int handled = 0; uint32_t mods = wlr_keyboard_get_modifiers(kb->device->keyboard); wlr_idle_notify_activity(idle, seat); /* On _press_, attempt to process a compositor keybinding. */ if (event->state == WL_KEYBOARD_KEY_STATE_PRESSED) for (i = 0; i < nsyms; i++) handled = keybinding(mods, syms[i]) || handled; if (!handled) { /* Pass unhandled keycodes along to the client. */ wlr_seat_set_keyboard(seat, kb->device); wlr_seat_keyboard_notify_key(seat, event->time_msec, event->keycode, event->state); } } void keypressmod(struct wl_listener *listener, void *data) { /* This event is raised when a modifier key, such as shift or alt, is * pressed. We simply communicate this to the client. */ Keyboard *kb = wl_container_of(listener, kb, modifiers); /* * A seat can only have one keyboard, but this is a limitation of the * Wayland protocol - not wlroots. We assign all connected keyboards to the * same seat. You can swap out the underlying wlr_keyboard like this and * wlr_seat handles this transparently. */ wlr_seat_set_keyboard(seat, kb->device); /* Send modifiers to the client. */ wlr_seat_keyboard_notify_modifiers(seat, &kb->device->keyboard->modifiers); } void killclient(const Arg *arg) { Client *sel = selclient(); if (!sel) return; client_send_close(sel); } void maplayersurfacenotify(struct wl_listener *listener, void *data) { LayerSurface *layersurface = wl_container_of(listener, layersurface, map); wlr_surface_send_enter(layersurface->layer_surface->surface, layersurface->layer_surface->output); motionnotify(0); } void mapnotify(struct wl_listener *listener, void *data) { /* Called when the surface is mapped, or ready to display on-screen. */ Client *c = wl_container_of(listener, c, map), *oldfocus = selclient(); if (client_is_unmanaged(c)) { /* Insert this independent into independents lists. */ wl_list_insert(&independents, &c->link); return; } /* Insert this client into client lists. */ wl_list_insert(&clients, &c->link); wl_list_insert(&fstack, &c->flink); wl_list_insert(&stack, &c->slink); client_get_geometry(c, &c->geom); c->geom.width += 2 * c->bw; c->geom.height += 2 * c->bw; /* Set initial monitor, tags, floating status, and focus */ applyrules(c); if (c->mon->fullscreenclient && c->mon->fullscreenclient == oldfocus && !c->isfloating && c->mon->lt[c->mon->sellt]->arrange) { maximizeclient(c->mon->fullscreenclient); focusclient(c->mon->fullscreenclient, 1); /* give the focus back the fullscreen client on that monitor if exists, * is focused and the new client isn't floating */ } } void monocle(Monitor *m) { Client *c; wl_list_for_each(c, &clients, link) { if (!VISIBLEON(c, m) || c->isfloating) continue; if (c->isfullscreen) maximizeclient(c); else resize(c, m->w.x, m->w.y, m->w.width, m->w.height, 0); } } void motionabsolute(struct wl_listener *listener, void *data) { /* This event is forwarded by the cursor when a pointer emits an _absolute_ * motion event, from 0..1 on each axis. This happens, for example, when * wlroots is running under a Wayland window rather than KMS+DRM, and you * move the mouse over the window. You could enter the window from any edge, * so we have to warp the mouse there. There is also some hardware which * emits these events. */ struct wlr_event_pointer_motion_absolute *event = data; wlr_cursor_warp_absolute(cursor, event->device, event->x, event->y); motionnotify(event->time_msec); } void motionnotify(uint32_t time) { double sx = 0, sy = 0; struct wlr_surface *surface = NULL; Client *c = NULL; // time is 0 in internal calls meant to restore pointer focus. if (time) { wlr_idle_notify_activity(idle, seat); /* Update selmon (even while dragging a window) */ if (sloppyfocus) selmon = xytomon(cursor->x, cursor->y); } /* If we are currently grabbing the mouse, handle and return */ if (cursor_mode == CurMove) { /* Move the grabbed client to the new position. */ resize(grabc, cursor->x - grabcx, cursor->y - grabcy, grabc->geom.width, grabc->geom.height, 1); return; } else if (cursor_mode == CurResize) { resize(grabc, grabc->geom.x, grabc->geom.y, cursor->x - grabc->geom.x, cursor->y - grabc->geom.y, 1); return; } if ((surface = xytolayersurface(&selmon->layers[ZWLR_LAYER_SHELL_V1_LAYER_OVERLAY], cursor->x, cursor->y, &sx, &sy))) ; else if ((surface = xytolayersurface(&selmon->layers[ZWLR_LAYER_SHELL_V1_LAYER_TOP], cursor->x, cursor->y, &sx, &sy))) ; #ifdef XWAYLAND /* Find an independent under the pointer and send the event along. */ else if ((c = xytoindependent(cursor->x, cursor->y))) { surface = wlr_surface_surface_at(c->surface.xwayland->surface, cursor->x - c->surface.xwayland->x - c->bw, cursor->y - c->surface.xwayland->y - c->bw, &sx, &sy); /* Otherwise, find the client under the pointer and send the event along. */ } #endif else if ((c = xytoclient(cursor->x, cursor->y))) { surface = client_surface_at(c, cursor->x - c->geom.x - c->bw, cursor->y - c->geom.y - c->bw, &sx, &sy); } else if ((surface = xytolayersurface(&selmon->layers[ZWLR_LAYER_SHELL_V1_LAYER_BOTTOM], cursor->x, cursor->y, &sx, &sy))) ; else surface = xytolayersurface(&selmon->layers[ZWLR_LAYER_SHELL_V1_LAYER_BACKGROUND], cursor->x, cursor->y, &sx, &sy); /* If there's no client surface under the cursor, set the cursor image to a * default. This is what makes the cursor image appear when you move it * off of a client or over its border. */ if (!surface && time) wlr_xcursor_manager_set_cursor_image(cursor_mgr, "left_ptr", cursor); pointerfocus(c, surface, sx, sy, time); } void motionrelative(struct wl_listener *listener, void *data) { /* This event is forwarded by the cursor when a pointer emits a _relative_ * pointer motion event (i.e. a delta) */ struct wlr_event_pointer_motion *event = data; /* The cursor doesn't move unless we tell it to. The cursor automatically * handles constraining the motion to the output layout, as well as any * special configuration applied for the specific input device which * generated the event. You can pass NULL for the device if you want to move * the cursor around without any input. */ wlr_cursor_move(cursor, event->device, event->delta_x, event->delta_y); motionnotify(event->time_msec); } void moveresize(const Arg *arg) { grabc = xytoclient(cursor->x, cursor->y); if (!grabc) return; /* Float the window and tell motionnotify to grab it */ setfloating(grabc, 1); switch (cursor_mode = arg->ui) { case CurMove: grabcx = cursor->x - grabc->geom.x; grabcy = cursor->y - grabc->geom.y; wlr_xcursor_manager_set_cursor_image(cursor_mgr, "fleur", cursor); break; case CurResize: /* Doesn't work for X11 output - the next absolute motion event * returns the cursor to where it started */ wlr_cursor_warp_closest(cursor, NULL, grabc->geom.x + grabc->geom.width, grabc->geom.y + grabc->geom.height); wlr_xcursor_manager_set_cursor_image(cursor_mgr, "bottom_right_corner", cursor); break; } } void outputmgrapply(struct wl_listener *listener, void *data) { struct wlr_output_configuration_v1 *config = data; outputmgrapplyortest(config, 0); } void outputmgrapplyortest(struct wlr_output_configuration_v1 *config, int test) { struct wlr_output_configuration_head_v1 *config_head; int ok = 1; wl_list_for_each(config_head, &config->heads, link) { struct wlr_output *wlr_output = config_head->state.output; wlr_output_enable(wlr_output, config_head->state.enabled); if (config_head->state.enabled) { if (config_head->state.mode) wlr_output_set_mode(wlr_output, config_head->state.mode); else wlr_output_set_custom_mode(wlr_output, config_head->state.custom_mode.width, config_head->state.custom_mode.height, config_head->state.custom_mode.refresh); wlr_output_layout_move(output_layout, wlr_output, config_head->state.x, config_head->state.y); wlr_output_set_transform(wlr_output, config_head->state.transform); wlr_output_set_scale(wlr_output, config_head->state.scale); } else if (wl_list_length(&mons) > 1) { Monitor *m; wl_list_for_each(m, &mons, link) { if (m->wlr_output->name == wlr_output->name) { // focus the left monitor (relative to the current focus) m->wlr_output->enabled = !m->wlr_output->enabled; focusmon(&(Arg) {.i = -1}); closemon(m); m->wlr_output->enabled = !m->wlr_output->enabled; } } } if (test) { ok &= wlr_output_test(wlr_output); wlr_output_rollback(wlr_output); } else ok &= wlr_output_commit(wlr_output); } if (ok) { wlr_output_configuration_v1_send_succeeded(config); if (!test) updatemons(); } else wlr_output_configuration_v1_send_failed(config); wlr_output_configuration_v1_destroy(config); } void outputmgrtest(struct wl_listener *listener, void *data) { struct wlr_output_configuration_v1 *config = data; outputmgrapplyortest(config, 1); } void pointerfocus(Client *c, struct wlr_surface *surface, double sx, double sy, uint32_t time) { struct timespec now; int internal_call = !time; /* Use top level surface if nothing more specific given */ if (c && !surface) surface = client_surface(c); /* If surface is NULL, clear pointer focus */ if (!surface) { wlr_seat_pointer_notify_clear_focus(seat); return; } if (internal_call) { clock_gettime(CLOCK_MONOTONIC, &now); time = now.tv_sec * 1000 + now.tv_nsec / 1000000; } /* If surface is already focused, only notify of motion */ if (surface == seat->pointer_state.focused_surface) { wlr_seat_pointer_notify_motion(seat, time, sx, sy); return; } /* Otherwise, let the client know that the mouse cursor has entered one * of its surfaces, and make keyboard focus follow if desired. */ wlr_seat_pointer_notify_enter(seat, surface, sx, sy); if (!c || client_is_unmanaged(c)) return; if (sloppyfocus && !internal_call) focusclient(c, 0); } void quit(const Arg *arg) { wl_display_terminate(dpy); } void render(struct wlr_surface *surface, int sx, int sy, void *data) { /* This function is called for every surface that needs to be rendered. */ struct render_data *rdata = data; struct wlr_output *output = rdata->output; double ox = 0, oy = 0; struct wlr_box obox; float matrix[9]; enum wl_output_transform transform; /* We first obtain a wlr_texture, which is a GPU resource. wlroots * automatically handles negotiating these with the client. The underlying * resource could be an opaque handle passed from the client, or the client * could have sent a pixel buffer which we copied to the GPU, or a few other * means. You don't have to worry about this, wlroots takes care of it. */ struct wlr_texture *texture = wlr_surface_get_texture(surface); if (!texture) return; /* The client has a position in layout coordinates. If you have two displays, * one next to the other, both 1080p, a client on the rightmost display might * have layout coordinates of 2000,100. We need to translate that to * output-local coordinates, or (2000 - 1920). */ wlr_output_layout_output_coords(output_layout, output, &ox, &oy); /* We also have to apply the scale factor for HiDPI outputs. This is only * part of the puzzle, dwl does not fully support HiDPI. */ obox.x = ox + rdata->x + sx; obox.y = oy + rdata->y + sy; obox.width = surface->current.width; obox.height = surface->current.height; scalebox(&obox, output->scale); /* * Those familiar with OpenGL are also familiar with the role of matrices * in graphics programming. We need to prepare a matrix to render the * client with. wlr_matrix_project_box is a helper which takes a box with * a desired x, y coordinates, width and height, and an output geometry, * then prepares an orthographic projection and multiplies the necessary * transforms to produce a model-view-projection matrix. * * Naturally you can do this any way you like, for example to make a 3D * compositor. */ transform = wlr_output_transform_invert(surface->current.transform); wlr_matrix_project_box(matrix, &obox, transform, 0, output->transform_matrix); /* This takes our matrix, the texture, and an alpha, and performs the actual * rendering on the GPU. */ wlr_render_texture_with_matrix(drw, texture, matrix, 1); /* This lets the client know that we've displayed that frame and it can * prepare another one now if it likes. */ wlr_surface_send_frame_done(surface, rdata->when); } void renderclients(Monitor *m, struct timespec *now) { Client *c, *sel = selclient(); const float *color; double ox, oy; int i, w, h; struct render_data rdata; struct wlr_box *borders; struct wlr_surface *surface; /* Each subsequent window we render is rendered on top of the last. Because * our stacking list is ordered front-to-back, we iterate over it backwards. */ wl_list_for_each_reverse(c, &stack, slink) { /* Only render visible clients which show on this monitor */ if (!VISIBLEON(c, c->mon) || !wlr_output_layout_intersects( output_layout, m->wlr_output, &c->geom)) continue; surface = client_surface(c); ox = c->geom.x, oy = c->geom.y; wlr_output_layout_output_coords(output_layout, m->wlr_output, &ox, &oy); if (c->bw) { w = surface->current.width; h = surface->current.height; borders = (struct wlr_box[4]) { {ox, oy, w + 2 * c->bw, c->bw}, /* top */ {ox, oy + c->bw, c->bw, h}, /* left */ {ox + c->bw + w, oy + c->bw, c->bw, h}, /* right */ {ox, oy + c->bw + h, w + 2 * c->bw, c->bw}, /* bottom */ }; /* Draw window borders */ color = (c == sel) ? focuscolor : bordercolor; for (i = 0; i < 4; i++) { scalebox(&borders[i], m->wlr_output->scale); wlr_render_rect(drw, &borders[i], color, m->wlr_output->transform_matrix); } } /* This calls our render function for each surface among the * xdg_surface's toplevel and popups. */ rdata.output = m->wlr_output; rdata.when = now; rdata.x = c->geom.x + c->bw; rdata.y = c->geom.y + c->bw; client_for_each_surface(c, render, &rdata); } } void renderlayer(struct wl_list *layer_surfaces, struct timespec *now) { LayerSurface *layersurface; wl_list_for_each(layersurface, layer_surfaces, link) { struct render_data rdata = { .output = layersurface->layer_surface->output, .when = now, .x = layersurface->geo.x, .y = layersurface->geo.y, }; wlr_surface_for_each_surface(layersurface->layer_surface->surface, render, &rdata); } } void rendermon(struct wl_listener *listener, void *data) { Client *c; int render = 1; /* This function is called every time an output is ready to display a frame, * generally at the output's refresh rate (e.g. 60Hz). */ Monitor *m = wl_container_of(listener, m, frame); struct timespec now; clock_gettime(CLOCK_MONOTONIC, &now); /* Do not render if any XDG clients have an outstanding resize. */ wl_list_for_each(c, &stack, slink) { if (c->resize) { wlr_surface_send_frame_done(client_surface(c), &now); render = 0; } } /* wlr_output_attach_render makes the OpenGL context current. */ if (!wlr_output_attach_render(m->wlr_output, NULL)) return; if (render) { /* Begin the renderer (calls glViewport and some other GL sanity checks) */ wlr_renderer_begin(drw, m->wlr_output->width, m->wlr_output->height); wlr_renderer_clear(drw, rootcolor); renderlayer(&m->layers[ZWLR_LAYER_SHELL_V1_LAYER_BACKGROUND], &now); renderlayer(&m->layers[ZWLR_LAYER_SHELL_V1_LAYER_BOTTOM], &now); renderclients(m, &now); #ifdef XWAYLAND renderindependents(m->wlr_output, &now); #endif renderlayer(&m->layers[ZWLR_LAYER_SHELL_V1_LAYER_TOP], &now); renderlayer(&m->layers[ZWLR_LAYER_SHELL_V1_LAYER_OVERLAY], &now); /* Hardware cursors are rendered by the GPU on a separate plane, and can be * moved around without re-rendering what's beneath them - which is more * efficient. However, not all hardware supports hardware cursors. For this * reason, wlroots provides a software fallback, which we ask it to render * here. wlr_cursor handles configuring hardware vs software cursors for you, * and this function is a no-op when hardware cursors are in use. */ wlr_output_render_software_cursors(m->wlr_output, NULL); /* Conclude rendering and swap the buffers, showing the final frame * on-screen. */ wlr_renderer_end(drw); } wlr_output_commit(m->wlr_output); } void resize(Client *c, int x, int y, int w, int h, int interact) { /* * Note that I took some shortcuts here. In a more fleshed-out * compositor, you'd wait for the client to prepare a buffer at * the new size, then commit any movement that was prepared. */ struct wlr_box *bbox = interact ? &sgeom : &c->mon->w; c->geom.x = x; c->geom.y = y; c->geom.width = w; c->geom.height = h; applybounds(c, bbox); /* wlroots makes this a no-op if size hasn't changed */ c->resize = client_set_size(c, c->geom.width - 2 * c->bw, c->geom.height - 2 * c->bw); } void run(char *startup_cmd) { pid_t startup_pid = -1; /* Add a Unix socket to the Wayland display. */ const char *socket = wl_display_add_socket_auto(dpy); if (!socket) BARF("startup: display_add_socket_auto"); /* Start the backend. This will enumerate outputs and inputs, become the DRM * master, etc */ if (!wlr_backend_start(backend)) BARF("startup: backend_start"); /* Now that outputs are initialized, choose initial selmon based on * cursor position, and set default cursor image */ selmon = xytomon(cursor->x, cursor->y); /* TODO hack to get cursor to display in its initial location (100, 100) * instead of (0, 0) and then jumping. still may not be fully * initialized, as the image/coordinates are not transformed for the * monitor when displayed here */ wlr_cursor_warp_closest(cursor, NULL, cursor->x, cursor->y); wlr_xcursor_manager_set_cursor_image(cursor_mgr, "left_ptr", cursor); /* Set the WAYLAND_DISPLAY environment variable to our socket and run the * startup command if requested. */ setenv("WAYLAND_DISPLAY", socket, 1); if (startup_cmd) { startup_pid = fork(); if (startup_pid < 0) EBARF("startup: fork"); if (startup_pid == 0) { execl("/bin/sh", "/bin/sh", "-c", startup_cmd, NULL); EBARF("startup: execl"); } } /* Run the Wayland event loop. This does not return until you exit the * compositor. Starting the backend rigged up all of the necessary event * loop configuration to listen to libinput events, DRM events, generate * frame events at the refresh rate, and so on. */ wl_display_run(dpy); if (startup_cmd) { kill(startup_pid, SIGTERM); waitpid(startup_pid, NULL, 0); } } void scalebox(struct wlr_box *box, float scale) { box->width = ROUND((box->x + box->width) * scale) - ROUND(box->x * scale); box->height = ROUND((box->y + box->height) * scale) - ROUND(box->y * scale); box->x = ROUND(box->x * scale); box->y = ROUND(box->y * scale); } Client * selclient(void) { Client *c = wl_container_of(fstack.next, c, flink); if (wl_list_empty(&fstack) || !VISIBLEON(c, selmon)) return NULL; return c; } void setcursor(struct wl_listener *listener, void *data) { /* This event is raised by the seat when a client provides a cursor image */ struct wlr_seat_pointer_request_set_cursor_event *event = data; /* If we're "grabbing" the cursor, don't use the client's image */ /* TODO still need to save the provided surface to restore later */ if (cursor_mode != CurNormal) return; /* This can be sent by any client, so we check to make sure this one is * actually has pointer focus first. If so, we can tell the cursor to * use the provided surface as the cursor image. It will set the * hardware cursor on the output that it's currently on and continue to * do so as the cursor moves between outputs. */ if (event->seat_client == seat->pointer_state.focused_client) wlr_cursor_set_surface(cursor, event->surface, event->hotspot_x, event->hotspot_y); } void setfloating(Client *c, int floating) { c->isfloating = floating; arrange(c->mon); } void setlayout(const Arg *arg) { if (!arg || !arg->v || arg->v != selmon->lt[selmon->sellt]) selmon->sellt ^= 1; if (arg && arg->v) selmon->lt[selmon->sellt] = (Layout *)arg->v; /* TODO change layout symbol? */ arrange(selmon); } /* arg > 1.0 will set mfact absolutely */ void setmfact(const Arg *arg) { float f; if (!arg || !selmon->lt[selmon->sellt]->arrange) return; f = arg->f < 1.0 ? arg->f + selmon->mfact : arg->f - 1.0; if (f < 0.1 || f > 0.9) return; selmon->mfact = f; arrange(selmon); } void setmon(Client *c, Monitor *m, unsigned int newtags) { Monitor *oldmon = c->mon; if (oldmon == m) return; c->mon = m; /* TODO leave/enter is not optimal but works */ if (oldmon) { wlr_surface_send_leave(client_surface(c), oldmon->wlr_output); arrange(oldmon); } if (m) { /* Make sure window actually overlaps with the monitor */ applybounds(c, &m->m); wlr_surface_send_enter(client_surface(c), m->wlr_output); c->tags = newtags ? newtags : m->tagset[m->seltags]; /* assign tags of target monitor */ arrange(m); } focusclient(focustop(selmon), 1); } void setpsel(struct wl_listener *listener, void *data) { /* This event is raised by the seat when a client wants to set the selection, * usually when the user copies something. wlroots allows compositors to * ignore such requests if they so choose, but in dwl we always honor */ struct wlr_seat_request_set_primary_selection_event *event = data; wlr_seat_set_primary_selection(seat, event->source, event->serial); } void setsel(struct wl_listener *listener, void *data) { /* This event is raised by the seat when a client wants to set the selection, * usually when the user copies something. wlroots allows compositors to * ignore such requests if they so choose, but in dwl we always honor */ struct wlr_seat_request_set_selection_event *event = data; wlr_seat_set_selection(seat, event->source, event->serial); } void setup(void) { /* The Wayland display is managed by libwayland. It handles accepting * clients from the Unix socket, manging Wayland globals, and so on. */ dpy = wl_display_create(); /* clean up child processes immediately */ sigchld(0); /* The backend is a wlroots feature which abstracts the underlying input and * output hardware. The autocreate option will choose the most suitable * backend based on the current environment, such as opening an X11 window * if an X11 server is running. The NULL argument here optionally allows you * to pass in a custom renderer if wlr_renderer doesn't meet your needs. The * backend uses the renderer, for example, to fall back to software cursors * if the backend does not support hardware cursors (some older GPUs * don't). */ if (!(backend = wlr_backend_autocreate(dpy))) BARF("couldn't create backend"); /* If we don't provide a renderer, autocreate makes a GLES2 renderer for us. * The renderer is responsible for defining the various pixel formats it * supports for shared memory, this configures that for clients. */ drw = wlr_backend_get_renderer(backend); wlr_renderer_init_wl_display(drw, dpy); /* This creates some hands-off wlroots interfaces. The compositor is * necessary for clients to allocate surfaces and the data device manager * handles the clipboard. Each of these wlroots interfaces has room for you * to dig your fingers in and play with their behavior if you want. Note that * the clients cannot set the selection directly without compositor approval, * see the setsel() function. */ compositor = wlr_compositor_create(dpy, drw); wlr_export_dmabuf_manager_v1_create(dpy); wlr_screencopy_manager_v1_create(dpy); wlr_data_control_manager_v1_create(dpy); wlr_data_device_manager_create(dpy); wlr_gamma_control_manager_v1_create(dpy); wlr_primary_selection_v1_device_manager_create(dpy); wlr_viewporter_create(dpy); /* Creates an output layout, which a wlroots utility for working with an * arrangement of screens in a physical layout. */ output_layout = wlr_output_layout_create(); wlr_xdg_output_manager_v1_create(dpy, output_layout); /* Configure a listener to be notified when new outputs are available on the * backend. */ wl_list_init(&mons); wl_signal_add(&backend->events.new_output, &new_output); /* Set up our client lists and the xdg-shell. The xdg-shell is a * Wayland protocol which is used for application windows. For more * detail on shells, refer to the article: * * https://drewdevault.com/2018/07/29/Wayland-shells.html */ wl_list_init(&clients); wl_list_init(&fstack); wl_list_init(&stack); wl_list_init(&independents); idle = wlr_idle_create(dpy); layer_shell = wlr_layer_shell_v1_create(dpy); wl_signal_add(&layer_shell->events.new_surface, &new_layer_shell_surface); xdg_shell = wlr_xdg_shell_create(dpy); wl_signal_add(&xdg_shell->events.new_surface, &new_xdg_surface); /* Use xdg_decoration protocol to negotiate server-side decorations */ xdeco_mgr = wlr_xdg_decoration_manager_v1_create(dpy); wl_signal_add(&xdeco_mgr->events.new_toplevel_decoration, &new_xdeco); /* * Creates a cursor, which is a wlroots utility for tracking the cursor * image shown on screen. */ cursor = wlr_cursor_create(); wlr_cursor_attach_output_layout(cursor, output_layout); /* Creates an xcursor manager, another wlroots utility which loads up * Xcursor themes to source cursor images from and makes sure that cursor * images are available at all scale factors on the screen (necessary for * HiDPI support). Scaled cursors will be loaded with each output. */ cursor_mgr = wlr_xcursor_manager_create(NULL, 24); /* * wlr_cursor *only* displays an image on screen. It does not move around * when the pointer moves. However, we can attach input devices to it, and * it will generate aggregate events for all of them. In these events, we * can choose how we want to process them, forwarding them to clients and * moving the cursor around. More detail on this process is described in my * input handling blog post: * * https://drewdevault.com/2018/07/17/Input-handling-in-wlroots.html * * And more comments are sprinkled throughout the notify functions above. */ wl_signal_add(&cursor->events.motion, &cursor_motion); wl_signal_add(&cursor->events.motion_absolute, &cursor_motion_absolute); wl_signal_add(&cursor->events.button, &cursor_button); wl_signal_add(&cursor->events.axis, &cursor_axis); wl_signal_add(&cursor->events.frame, &cursor_frame); /* * Configures a seat, which is a single "seat" at which a user sits and * operates the computer. This conceptually includes up to one keyboard, * pointer, touch, and drawing tablet device. We also rig up a listener to * let us know when new input devices are available on the backend. */ wl_list_init(&keyboards); wl_signal_add(&backend->events.new_input, &new_input); virtual_keyboard_mgr = wlr_virtual_keyboard_manager_v1_create(dpy); wl_signal_add(&virtual_keyboard_mgr->events.new_virtual_keyboard, &new_virtual_keyboard); seat = wlr_seat_create(dpy, "seat0"); wl_signal_add(&seat->events.request_set_cursor, &request_cursor); wl_signal_add(&seat->events.request_set_selection, &request_set_sel); wl_signal_add(&seat->events.request_set_primary_selection, &request_set_psel); output_mgr = wlr_output_manager_v1_create(dpy); wl_signal_add(&output_mgr->events.apply, &output_mgr_apply); wl_signal_add(&output_mgr->events.test, &output_mgr_test); #ifdef XWAYLAND /* * Initialise the XWayland X server. * It will be started when the first X client is started. */ xwayland = wlr_xwayland_create(dpy, compositor, 1); if (xwayland) { wl_signal_add(&xwayland->events.ready, &xwayland_ready); wl_signal_add(&xwayland->events.new_surface, &new_xwayland_surface); /* * Create the XWayland cursor manager at scale 1, setting its default * pointer to match the rest of dwl. */ xcursor_mgr = wlr_xcursor_manager_create(NULL, 24); wlr_xcursor_manager_load(xcursor_mgr, 1); if ((xcursor = wlr_xcursor_manager_get_xcursor(xcursor_mgr, "left_ptr", 1))) wlr_xwayland_set_cursor(xwayland, xcursor->images[0]->buffer, xcursor->images[0]->width * 4, xcursor->images[0]->width, xcursor->images[0]->height, xcursor->images[0]->hotspot_x, xcursor->images[0]->hotspot_y); setenv("DISPLAY", xwayland->display_name, 1); } else { fprintf(stderr, "failed to setup XWayland X server, continuing without it\n"); } #endif } void sigchld(int unused) { if (signal(SIGCHLD, sigchld) == SIG_ERR) EBARF("can't install SIGCHLD handler"); while (0 < waitpid(-1, NULL, WNOHANG)) ; } void spawn(const Arg *arg) { if (fork() == 0) { setsid(); execvp(((char **)arg->v)[0], (char **)arg->v); EBARF("dwl: execvp %s failed", ((char **)arg->v)[0]); } } void tag(const Arg *arg) { Client *sel = selclient(); if (sel && arg->ui & TAGMASK) { sel->tags = arg->ui & TAGMASK; focusclient(focustop(selmon), 1); arrange(selmon); } } void tagmon(const Arg *arg) { Client *sel = selclient(); if (!sel) return; setmon(sel, dirtomon(arg->i), 0); } void tile(Monitor *m) { unsigned int i, n = 0, h, mw, my, ty; Client *c; wl_list_for_each(c, &clients, link) if (VISIBLEON(c, m) && !c->isfloating) n++; if (n == 0) return; if (n > m->nmaster) mw = m->nmaster ? m->w.width * m->mfact : 0; else mw = m->w.width; i = my = ty = 0; wl_list_for_each(c, &clients, link) { if (!VISIBLEON(c, m) || c->isfloating) continue; if (c->isfullscreen) maximizeclient(c); else if (i < m->nmaster) { h = (m->w.height - my) / (MIN(n, m->nmaster) - i); resize(c, m->w.x, m->w.y + my, mw, h, 0); my += c->geom.height; } else { h = (m->w.height - ty) / (n - i); resize(c, m->w.x + mw, m->w.y + ty, m->w.width - mw, h, 0); ty += c->geom.height; } i++; } } void togglefloating(const Arg *arg) { Client *sel = selclient(); if (!sel) return; /* return if fullscreen */ setfloating(sel, !sel->isfloating /* || sel->isfixed */); } void toggletag(const Arg *arg) { unsigned int newtags; Client *sel = selclient(); if (!sel) return; newtags = sel->tags ^ (arg->ui & TAGMASK); if (newtags) { sel->tags = newtags; focusclient(focustop(selmon), 1); arrange(selmon); } } void toggleview(const Arg *arg) { unsigned int newtagset = selmon->tagset[selmon->seltags] ^ (arg->ui & TAGMASK); if (newtagset) { selmon->tagset[selmon->seltags] = newtagset; focusclient(focustop(selmon), 1); arrange(selmon); } } void unmaplayersurface(LayerSurface *layersurface) { layersurface->layer_surface->mapped = 0; if (layersurface->layer_surface->surface == seat->keyboard_state.focused_surface) focusclient(selclient(), 1); motionnotify(0); } void unmaplayersurfacenotify(struct wl_listener *listener, void *data) { LayerSurface *layersurface = wl_container_of(listener, layersurface, unmap); unmaplayersurface(layersurface); } void unmapnotify(struct wl_listener *listener, void *data) { /* Called when the surface is unmapped, and should no longer be shown. */ Client *c = wl_container_of(listener, c, unmap); wl_list_remove(&c->link); if (client_is_unmanaged(c)) return; setmon(c, NULL, 0); wl_list_remove(&c->flink); wl_list_remove(&c->slink); } void updatemons() { struct wlr_output_configuration_v1 *config = wlr_output_configuration_v1_create(); Monitor *m; sgeom = *wlr_output_layout_get_box(output_layout, NULL); wl_list_for_each(m, &mons, link) { struct wlr_output_configuration_head_v1 *config_head = wlr_output_configuration_head_v1_create(config, m->wlr_output); /* Get the effective monitor geometry to use for surfaces */ m->m = m->w = *wlr_output_layout_get_box(output_layout, m->wlr_output); /* Calculate the effective monitor geometry to use for clients */ arrangelayers(m); /* Don't move clients to the left output when plugging monitors */ arrange(m); config_head->state.enabled = m->wlr_output->enabled; config_head->state.mode = m->wlr_output->current_mode; config_head->state.x = m->m.x; config_head->state.y = m->m.y; } wlr_output_manager_v1_set_configuration(output_mgr, config); } void view(const Arg *arg) { if ((arg->ui & TAGMASK) == selmon->tagset[selmon->seltags]) return; selmon->seltags ^= 1; /* toggle sel tagset */ if (arg->ui & TAGMASK) selmon->tagset[selmon->seltags] = arg->ui & TAGMASK; focusclient(focustop(selmon), 1); arrange(selmon); } void virtualkeyboard(struct wl_listener *listener, void *data) { struct wlr_virtual_keyboard_v1 *keyboard = data; struct wlr_input_device *device = &keyboard->input_device; createkeyboard(device); } Client * xytoclient(double x, double y) { /* Find the topmost visible client (if any) at point (x, y), including * borders. This relies on stack being ordered from top to bottom. */ Client *c; wl_list_for_each(c, &stack, slink) if (VISIBLEON(c, c->mon) && wlr_box_contains_point(&c->geom, x, y)) return c; return NULL; } struct wlr_surface * xytolayersurface(struct wl_list *layer_surfaces, double x, double y, double *sx, double *sy) { LayerSurface *layersurface; wl_list_for_each_reverse(layersurface, layer_surfaces, link) { struct wlr_surface *sub; if (!layersurface->layer_surface->mapped) continue; sub = wlr_layer_surface_v1_surface_at( layersurface->layer_surface, x - layersurface->geo.x, y - layersurface->geo.y, sx, sy); if (sub) return sub; } return NULL; } Monitor * xytomon(double x, double y) { struct wlr_output *o = wlr_output_layout_output_at(output_layout, x, y); return o ? o->data : NULL; } void zoom(const Arg *arg) { Client *c, *sel = selclient(); if (!sel || !selmon->lt[selmon->sellt]->arrange || sel->isfloating) return; /* Search for the first tiled window that is not sel, marking sel as * NULL if we pass it along the way */ wl_list_for_each(c, &clients, link) if (VISIBLEON(c, selmon) && !c->isfloating) { if (c != sel) break; sel = NULL; } /* Return if no other tiled window was found */ if (&c->link == &clients) return; /* If we passed sel, move c to the front; otherwise, move sel to the * front */ if (!sel) sel = c; wl_list_remove(&sel->link); wl_list_insert(&clients, &sel->link); focusclient(sel, 1); arrange(selmon); } #ifdef XWAYLAND void activatex11(struct wl_listener *listener, void *data) { Client *c = wl_container_of(listener, c, activate); /* Only "managed" windows can be activated */ if (c->type == X11Managed) wlr_xwayland_surface_activate(c->surface.xwayland, 1); } void configurex11(struct wl_listener *listener, void *data) { Client *c = wl_container_of(listener, c, configure); struct wlr_xwayland_surface_configure_event *event = data; wlr_xwayland_surface_configure(c->surface.xwayland, event->x, event->y, event->width, event->height); } void createnotifyx11(struct wl_listener *listener, void *data) { struct wlr_xwayland_surface *xwayland_surface = data; Client *c; wl_list_for_each(c, &clients, link) if (c->isfullscreen && VISIBLEON(c, c->mon)) setfullscreen(c, 0); /* Allocate a Client for this surface */ c = xwayland_surface->data = calloc(1, sizeof(*c)); c->surface.xwayland = xwayland_surface; c->type = xwayland_surface->override_redirect ? X11Unmanaged : X11Managed; c->bw = borderpx; c->isfullscreen = 0; /* Listen to the various events it can emit */ LISTEN(&xwayland_surface->events.map, &c->map, mapnotify); LISTEN(&xwayland_surface->events.unmap, &c->unmap, unmapnotify); LISTEN(&xwayland_surface->events.request_activate, &c->activate, activatex11); LISTEN(&xwayland_surface->events.request_configure, &c->configure, configurex11); LISTEN(&xwayland_surface->events.destroy, &c->destroy, destroynotify); LISTEN(&xwayland_surface->events.request_fullscreen, &c->fullscreen, fullscreennotify); } Atom getatom(xcb_connection_t *xc, const char *name) { Atom atom = 0; xcb_intern_atom_reply_t *reply; xcb_intern_atom_cookie_t cookie = xcb_intern_atom(xc, 0, strlen(name), name); if ((reply = xcb_intern_atom_reply(xc, cookie, NULL))) atom = reply->atom; free(reply); return atom; } void renderindependents(struct wlr_output *output, struct timespec *now) { Client *c; struct render_data rdata; struct wlr_box geom; wl_list_for_each_reverse(c, &independents, link) { geom.x = c->surface.xwayland->x; geom.y = c->surface.xwayland->y; geom.width = c->surface.xwayland->width; geom.height = c->surface.xwayland->height; /* Only render visible clients which show on this output */ if (!wlr_output_layout_intersects(output_layout, output, &geom)) continue; rdata.output = output; rdata.when = now; rdata.x = c->surface.xwayland->x; rdata.y = c->surface.xwayland->y; wlr_surface_for_each_surface(c->surface.xwayland->surface, render, &rdata); } } void xwaylandready(struct wl_listener *listener, void *data) { struct wlr_xcursor *xcursor; xcb_connection_t *xc = xcb_connect(xwayland->display_name, NULL); int err = xcb_connection_has_error(xc); if (err) { fprintf(stderr, "xcb_connect to X server failed with code %d\n. Continuing with degraded functionality.\n", err); return; } /* Collect atoms we are interested in. If getatom returns 0, we will * not detect that window type. */ netatom[NetWMWindowTypeDialog] = getatom(xc, "_NET_WM_WINDOW_TYPE_DIALOG"); netatom[NetWMWindowTypeSplash] = getatom(xc, "_NET_WM_WINDOW_TYPE_SPLASH"); netatom[NetWMWindowTypeToolbar] = getatom(xc, "_NET_WM_WINDOW_TYPE_TOOLBAR"); netatom[NetWMWindowTypeUtility] = getatom(xc, "_NET_WM_WINDOW_TYPE_UTILITY"); /* assign the one and only seat */ wlr_xwayland_set_seat(xwayland, seat); /* Set the default XWayland cursor to match the rest of dwl. */ if ((xcursor = wlr_xcursor_manager_get_xcursor(cursor_mgr, "left_ptr", 1))) wlr_xwayland_set_cursor(xwayland, xcursor->images[0]->buffer, xcursor->images[0]->width * 4, xcursor->images[0]->width, xcursor->images[0]->height, xcursor->images[0]->hotspot_x, xcursor->images[0]->hotspot_y); xcb_disconnect(xc); } Client * xytoindependent(double x, double y) { /* Find the topmost visible independent at point (x, y). * For independents, the most recently created can be used as the "top". * We rely on the X11 convention of unmapping unmanaged when the "owning" * client loses focus, which ensures that unmanaged are only visible on * the current tag. */ Client *c; wl_list_for_each_reverse(c, &independents, link) { struct wlr_box geom = { .x = c->surface.xwayland->x, .y = c->surface.xwayland->y, .width = c->surface.xwayland->width, .height = c->surface.xwayland->height, }; if (wlr_box_contains_point(&geom, x, y)) return c; } return NULL; } #endif int main(int argc, char *argv[]) { char *startup_cmd = NULL; int c; while ((c = getopt(argc, argv, "s:h")) != -1) { if (c == 's') startup_cmd = optarg; else goto usage; } if (optind < argc) goto usage; // Wayland requires XDG_RUNTIME_DIR for creating its communications // socket if (!getenv("XDG_RUNTIME_DIR")) BARF("XDG_RUNTIME_DIR must be set"); setup(); run(startup_cmd); cleanup(); return EXIT_SUCCESS; usage: BARF("Usage: %s [-s startup command]", argv[0]); }