// Change the width and height if required (defined in portrait mode) // or use the constructor to over-ride defaults #define TFT_WIDTH 320 #define TFT_HEIGHT 480 // For Raspberry Pi ILI9486 only with a modified board to add a write strobe: #if defined (TFT_WR) && defined (RPI_ILI9486_DRIVER) #define RPI_WRITE_STROBE #endif // Color definitions for backwards compatibility with old sketches // use colour definitions like TFT_BLACK to make sketches more portable #define ILI9486_BLACK 0x0000 /* 0, 0, 0 */ #define ILI9486_NAVY 0x000F /* 0, 0, 128 */ #define ILI9486_DARKGREEN 0x03E0 /* 0, 128, 0 */ #define ILI9486_DARKCYAN 0x03EF /* 0, 128, 128 */ #define ILI9486_MAROON 0x7800 /* 128, 0, 0 */ #define ILI9486_PURPLE 0x780F /* 128, 0, 128 */ #define ILI9486_OLIVE 0x7BE0 /* 128, 128, 0 */ #define ILI9486_LIGHTGREY 0xC618 /* 192, 192, 192 */ #define ILI9486_DARKGREY 0x7BEF /* 128, 128, 128 */ #define ILI9486_BLUE 0x001F /* 0, 0, 255 */ #define ILI9486_GREEN 0x07E0 /* 0, 255, 0 */ #define ILI9486_CYAN 0x07FF /* 0, 255, 255 */ #define ILI9486_RED 0xF800 /* 255, 0, 0 */ #define ILI9486_MAGENTA 0xF81F /* 255, 0, 255 */ #define ILI9486_YELLOW 0xFFE0 /* 255, 255, 0 */ #define ILI9486_WHITE 0xFFFF /* 255, 255, 255 */ #define ILI9486_ORANGE 0xFD20 /* 255, 165, 0 */ #define ILI9486_GREENYELLOW 0xAFE5 /* 173, 255, 47 */ #define ILI9486_PINK 0xF81F // Delay between some initialisation commands #define TFT_INIT_DELAY 0x80 // Not used unless commandlist invoked // Generic commands used by TFT_eSPI.cpp #define TFT_NOP 0x00 #define TFT_SWRST 0x01 #define TFT_CASET 0x2A #define TFT_PASET 0x2B #define TFT_RAMWR 0x2C #define TFT_RAMRD 0x2E #define TFT_IDXRD 0x00 // ILI9341 only, indexed control register read #define TFT_MADCTL 0x36 #define TFT_MAD_MY 0x80 #define TFT_MAD_MX 0x40 #define TFT_MAD_MV 0x20 #define TFT_MAD_ML 0x10 #define TFT_MAD_BGR 0x08 #define TFT_MAD_MH 0x04 #define TFT_MAD_SS 0x02 #define TFT_MAD_GS 0x01 #define TFT_MAD_RGB 0x00 #define TFT_INVOFF 0x20 #define TFT_INVON 0x21