// This is the command sequence that initialises the HX8357D driver
//
// This setup information uses simple 8 bit SPI writecommand() and writedata() functions
//
// See ST7735_Setup.h file for an alternative format


// Configure HX8357D display

    // setextc
    writecommand(HX8357D_SETC);
    writedata(0xFF);
    writedata(0x83);
    writedata(0x57);
    delay(300);

    // setRGB which also enables SDO
    writecommand(HX8357_SETRGB); 
    writedata(0x80);  //enable SDO pin!
//  writedata(0x00);  //disable SDO pin!
    writedata(0x0);
    writedata(0x06);
    writedata(0x06);

    writecommand(HX8357D_SETCOM);
    writedata(0x25);  // -1.52V
    
    writecommand(HX8357_SETOSC);
    writedata(0x68);  // Normal mode 70Hz, Idle mode 55 Hz
    
    writecommand(HX8357_SETPANEL); //Set Panel
    writedata(0x05);  // BGR, Gate direction swapped
    
    writecommand(HX8357_SETPWR1);
    writedata(0x00);  // Not deep standby
    writedata(0x15);  //BT
    writedata(0x1C);  //VSPR
    writedata(0x1C);  //VSNR
    writedata(0x83);  //AP
    writedata(0xAA);  //FS

    writecommand(HX8357D_SETSTBA);  
    writedata(0x50);  //OPON normal
    writedata(0x50);  //OPON idle
    writedata(0x01);  //STBA
    writedata(0x3C);  //STBA
    writedata(0x1E);  //STBA
    writedata(0x08);  //GEN
    
    writecommand(HX8357D_SETCYC);  
    writedata(0x02);  //NW 0x02
    writedata(0x40);  //RTN
    writedata(0x00);  //DIV
    writedata(0x2A);  //DUM
    writedata(0x2A);  //DUM
    writedata(0x0D);  //GDON
    writedata(0x78);  //GDOFF

    writecommand(HX8357D_SETGAMMA); 
    writedata(0x02);
    writedata(0x0A);
    writedata(0x11);
    writedata(0x1d);
    writedata(0x23);
    writedata(0x35);
    writedata(0x41);
    writedata(0x4b);
    writedata(0x4b);
    writedata(0x42);
    writedata(0x3A);
    writedata(0x27);
    writedata(0x1B);
    writedata(0x08);
    writedata(0x09);
    writedata(0x03);
    writedata(0x02);
    writedata(0x0A);
    writedata(0x11);
    writedata(0x1d);
    writedata(0x23);
    writedata(0x35);
    writedata(0x41);
    writedata(0x4b);
    writedata(0x4b);
    writedata(0x42);
    writedata(0x3A);
    writedata(0x27);
    writedata(0x1B);
    writedata(0x08);
    writedata(0x09);
    writedata(0x03);
    writedata(0x00);
    writedata(0x01);
    
    writecommand(HX8357_COLMOD);
    writedata(0x55);  // 16 bit
    
    writecommand(HX8357_MADCTL);  
    writedata(TFT_MAD_MX | TFT_MAD_MY | TFT_MAD_COLOR_ORDER); 
    
    writecommand(HX8357_TEON);  // TE off
    writedata(0x00); 
    
    writecommand(HX8357_TEARLINE);  // tear line
    writedata(0x00); 
    writedata(0x02);

    writecommand(HX8357_SLPOUT);  //Exit Sleep
    delay(150);
    
    writecommand(HX8357_DISPON);  // display on
    delay(50);

// End of HX8357D display configuration